Q:How do hydraulic butterfly valves work?

3. butterfly valve hydraulic drive device structureThe valve hydraulic device is mounted on the valve drive shaft. The driving shaft of the valve is fixed with a transmission spline, and the crank (with an outer spline) is sleeved on the driving shaft. When the hydraulic system works normally, through the gear sleeve, the transmission spline is connected with the crank. Thus, the hydraulic cylinder drives the crank, and the spline on the crank passes the torque to the transmission spline by means of a gear sleeve. Because the driving spline is fixed on the driving shaft, the driving shaft rotates and drives the valve plate to start and close. A section of optical axis is arranged at the end of the driving shaft and is inserted into the end of the manual shaft (matched with the clearance of H11/ H11), and the function is that the manual shaft is concentric with the main drive shaft. In normal operation, the optical axis rotates with the drive shaft, but the manual device does not move. When the hydraulic operation is performed manually or manually from the hydraulic unit, a * * * conversion is required. The utility model is composed of a nut, a hand wheel, a screw rod, a support frame and a shifting device. When the utility model is switched, the hand wheel is rotated and driven by the screw rod to move. A guide rod is arranged on the bracket to make the shift and translation stable.

Q:Should I connect the butterfly valve before and after the pump? Or gate valve?

This situation should use gate valveBecause it has the following advantages:1, the fluid resistance is small, the sealing surface by the erosion of small and medium Chong brush.2, opening and closing more effort.3, medium flow unrestricted, no disturb, do not reduce pressure.4. The shape is simple, the structure length is short, the manufacturing technology is good, and the scope of application is wide.Butterfly valve main deficiency is that it uses the pressure and temperature range is small.And poor sealing. Therefore, the gate valve should be preferred.Of course, there is also a multi-functional pump control valve is also very good, dedicated to the water supply system. Connection URL: (Reference), you can look at yourself, and I hope to help you.

Q:What's the difference between turbine butterfly valve and manual butterfly valve?

Butterfly (Manual butterfly) butterfly plate installed in the direction of the diameter of the pipe. In the butterfly valve body cylindrical channel, the disc shaped disc rotates around the axis. The angle of rotation is between 0 and -90 degrees. When rotating to 90 degrees, the valve is fully open.Butterfly valve structure is simple, small size, light weight, only by a few parts. The utility model can be rapidly opened and closed only by rotating 90 DEG, the operation is simple, and the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the butterfly plate thickness is the only resistance when the medium passes through the valve body, so the pressure drop produced by the valve is very small, so the flow control characteristic is better. Butterfly valve has an elastic seal and metal seal, two types of seals. Resilient sealing valve. The sealing ring can be mounted on the valve body or attached to the periphery of the disc.

Q:Three eccentric hard sealing butterfly valve, why not fit in the end of the pipe?

Louzhu asked extremely, since it is hard seal, it is bound to guarantee long-term work after zero leakage, or should be configured double eccentric soft sealing valve is more reasonable.

Q:Butterfly valve common faults and treatment methods?

Three, summary:Only familiar with every detail of circulating water pump outlet valve and butterfly valve equipment, timely and thorough maintenance and strict debugging, to ensure the safety and reliability of equipment operation, to ensure the healthy and orderly operation of equipment.

Q:What does "10" in the butterfly valve "D71X-10" mean?

The pressure of 10 kg 1.0MPA is usually cast iron

Q:What are single eccentric and double eccentric in butterfly valves? What's the difference, please explain in detail?

Three eccentric butterfly valve: to high temperature, must use hard seal, but the leakage is large; to zero leakage, must use soft sealing, but not high temperature. In order to overcome the double eccentric butterfly valve this contradiction, and the butterfly valve for third times eccentric. The so-called third eccentric, that is, the shape of the sealing pair is not a positive cone, but rather oblique cone.Variable eccentric butterfly valve: variable eccentric butterfly valve is unique in that the valve stem axis installation disc is a three shaft type structure, the three stem shaft two concentric shafts, while the center section of the shaft center line and both ends of a center axis deviation distance, the installation disc in the middle section of the shaft. The eccentric structure makes the disc become double eccentric at full open position, and becomes eccentric when the disc rotates to the closed position. Due to the action of the eccentric shaft, near the close, the butterfly plate sealed to the seat by moving a distance within the cone, the butterfly plate and the valve seat sealing surface to achieve consistent and reliable sealing performance.

Q:In the pipeline attached building Atlas 05S502, in the middle of a water meter and check valve, the two sides are divided into two butterfly valve, want to ask why to arrange this way, what is the role of the two butterfly valve?

Check the water gauge and check valve on both sides to facilitate the maintenance and replacement of water meter and check valve.

Q:Hey YA! I am looking at getting an 01 Honda Prelude this month and valve adjustment keeps coming up when people discuss this car and other cars as well. What is this? Does it cost a lot to do, and is it important? Thank you!

Not at all a big expense most places should do it for $90 -150 including the gasket . Takes me about an hour to do one. If you don't adjust them eventually you could wear the cam possibly although I've never seen any issues from not doing it. If they are too tight then possibly they could've got the engine hot . If they are too loose which is what they should do as they wear they'll just be a little noisy until you get them adjusted if I can help in any other way please let me know hope this helps

Q:Gate valve and butterfly valve which is installed when there is a direction?

Do not require frequent opening and closing, and keep gate fully open or fully closed. Not suitable for use as a regulator or throttling.Butterfly valve refers to the closure of parts (butterfly plate) as the disk, around the valve shaft to achieve rotation and closing of a valve, the main cut off on the pipe and throttling role. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation. Butterfly valve is fully open to fully closed is usually 90 degrees butterfly simple structure, small volume and light weight, only by a few parts. Moreover, the utility model can be rapidly opened and closed only by rotating 90 DEG, and the operation is simple.Is the gate valve opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle. Gate has two sealing surface, gate valve advantages: fluid resistance is small, opening and closing more effort, medium flow unrestricted, not disturbing flow, do not reduce pressure.