Woodworking Band Saw Machine and Vertical Saws
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Band Saw Machine
Band Saw Machine Main Structure Of The Machine:
This machine from the body, working platforms, the upper and lower saw wheel body, the upper and lower saw card device such as security cover and transmission parts.
Band Saw Machine Use of the machine:
This machine is mainly used for wood vertical saws, horizontal saw all kinds of Square-edged Timber and plates, also applies to non-metal-like plastic, nylon sawing.It is suitable for all kinds of wood processing plants, such as furniture factories, board box factory, wood thread factory, wood-mode manufacturing and construction technology, etc.
Main Specification And Technology Parameter:(Normal Type)
Model | MJ345/MJ346 | MJ316A/MJ316D | MJ318/MJ319 |
Saw wheel Dia. | 500mm/600mm | 610mm/620mm | 800mm/900mm |
Width of sawing woof | 450mm | 400mm/350mm | 350/400mm |
Height of sawing wood | 150mm | 300mm/350mm | 400/600mm |
Cutting speed of saw band | 20m/sec | 21.3m/sec 27m/sec | 30.14m/sec 34m/sec |
Rotary speed of saw wheel | 780r/min | 680r/min 830r/min | 720r/min |
Adjustable angle of worktable(LXW) | 0-45degree | ||
Max size of worktable( | 540X570mm | 780X700mm/840X750mm | 800X750mm/830X780mm |
Motor power/Voltage frequency | 2.2kw(3HP) / 380V 50Hz | 4kw/7.5kw(5.5/10HP) / 380V 50Hz | 11kw(15HP) / 380V 50Hz |
Weight of machine | 300kg/850kg | 850kg | 980kg/1100kg |
Overall dimensions | 860X700X1900mm | 1600X1200X2050mm | 1700X1350X2350mm/ 1750X1400X2750mm |
Main Specification And Technology Parameter:(With sliding table type)
Model | MJ316DT | MJ318T | MJ319T |
Size of sliding table(LXW) | 2800X377mm | 3200X367mm | 3200X367mm |
Saw wheel Dia. | 620mm | 800mm | 900mm |
Max processing length | 2600mm | 3000mm | 3000mm |
Width of sawing woof | 350mm | 400mm | 400mm |
Height of sawing wood | 350mm | 600mm | 600mm |
Cutting speed of saw band | 27m/sec | 34m/sec | 34m/sec |
Rotary speed of saw wheel | 830r/min | 720r/min | 720r/min |
Max size of fixed worktable | 830X350mm | 790X380mm | 790X380mm |
Motor power/Voltage frequency | 7.5kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz |
Weight of machine | 1150kg | 1300kg | 1400kg |
Overall dimensions | 2870X1850X2750mm | 2870X1850X2750mm | 2870X1850X2750mm |
- Q:Why should there be banding reinforcement? In which case are edge reinforcement bars calculated?
- The construction of edge reinforcement is usually required by the construction and the force of the structure.Most of the reinforcing bars appear at the end of the non supporting plate, such as the end of the cantilever plate
- Q:The more detailed the better, as long as the edge and veneer veneer detailed steps, other steps do not use.
- 1.: edgeThe manual or automatic edge banding machine edge, can also manually edge, no matter what kind of program are: edge, edge or edge glue - edgeband pressure post in edge - edge - on both sides of the extra redundant block edge trimming - dressing for automatic sealing machine, milling, and tracking trimming, scraping, polishing and other functions. ?The edge is the key to the edge of the plate must be straight, not push table saw blade size dislocation generated by the steps, to pressure post close, otherwise prone to edge and edge cracks, hand edge special glue best edge by hand, do not recommend the use of adhesive, heat is easy to fall off. ?2.: veneeringPlate thick sanding - selection of veneer veneer veneer cutting - seam - plate - will be put in the glue veneer panels -- into the hot pressing surface coating adhesive, edge trimming orSeveral key veneer veneer:The paste surface must be flat, no plate reinforcement, sag, such as holes, otherwise easy to bubble, separation;Veneer cutting cut straight seam tight, otherwise prone to crack;Glue to proper and uniform, too much glue easily through the glue, glue is too small easy to lack of glue, bubbling, separation;The temperature and time of pressing should be mastered accurately. ?If there's anything else you can't understand, leave a message for me and talk about it in detail.A sheet of thick sand light, XSUJN said very well, no longer Russell; on veneer cutting, add, in addition to the said, and sometimes in order to need to design and style, to make the M word, veneer cassion, twill and other flower shaped, but also need to use special wood cutting machine cut. The pattern can spell out such a beautiful symmetry.
- Q:I bought EO class solid wood paint free board to do furniture, but when the edge of the use of universal adhesive edge banding, a little green. I wonder if there is any other way to solve it. Paint with water paint or cover with other green paint, for example.
- Edge banding and solid wood lines can be solved, but solid wood lines are longer
- Q:Can the automatic linear edge banding machine only seal the straight line? How about sealing the curve?
- A curve edge sealing machine is a semi-automatic edge sealing machine. When the belt comes out from the gluing shaft, the belt is pressed on the board by hand. There are also automatic, but the automatic is too slow?
- Q:Mainly sealing veneer, requiring small odor, volatile
- Pauchie furniture edge glue is used Henkel glue
- Q:Edge sealing machine can not boot, how to deal with?
- Find an electrician, and then find drawings or manufacturers to make a phone call, in general, this failure is not a big problem, there may be a fault, it may be which protection switch started. Just check it out. What else is your machine?
- Q:The main reasons of edge banding degumming
- First, it should be in the dustSecond, inletThird, sun exposure
- Q:Please advise me. All my predecessors, how can the furniture edge of knowledge, the more detailed the better. Thank you!PVC furniture edge banding in the production of the factory is directly in accordance with the requirements of customer specifications, or first produce a large edge coated paper, processing? How much is the general quantity? And what about a case of boxes?
- A commonly used method of machining the edges of modern furniture parts. Mainly particleboard, furniture, plate edge decoration process. Such as using wood veneer Edge, play a decorative role.The manual or automatic edge banding machine edge, can also manually edge, no matter what kind of program are: edge, edge or edge glue - edgeband pressure post in edge - edge - on both sides of the extra redundant block edge trimming - dressing for automatic sealing machine, milling, and tracking trimming, scraping, polishing and other functions.The edge is the key to the edge of the plate must be straight, not push table saw blade size dislocation generated by the steps, to pressure post close, otherwise prone to edge and edge cracks, hand edge special glue best edge by hand, do not recommend the use of adhesive, heat is easy to fall off.
- Q:Solid wood flooring is necessary waterproof paint edge?
- Solid wood flooring is generally not waterproof, but do not need to paint, you can regularly play a layer of floor wax, protect the floor.Before construction, solid wood flooring is best placed in advance in a well ventilated place, open the packing box, ventilate. We should pay more attention to the ventilation problems in the construction of the rainy season, so you can release the floor painting taste; can also minimize the rainy weather brought to the damp wooden floors, reduce the possible deformation, drum and Fengkuan is like when in use.In the wooden floor paved the best in use for a period of time after waxing, also called wax. In this way, the moisture remaining in the construction can be evaporated as much as possible. Extend the service life of the floor.Finally, when laying large core board, the wooden keel should be used to level the ground, and the wool board is divided into blocks, and each floor space is provided with 1cm seams, so that the moisture on the ground surface is easy to be distributed, and the wooden floor can be prevented from bulging. Clean the ground residual soil residue, may be appropriate to sprinkle some insect repellant, in order to prevent regeneration insects.
- Q:Leak is wood, especially ugly, is there a quality problem?
- This should find dealers or manufacturers, it should not be done in place, belonging to quality problems
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Woodworking Band Saw Machine and Vertical Saws
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords