Ware Bathroom Centre

Hot Products

FAQ

Processing center processing oblique oval
Second, the workpiece is not fixed clamping tight, which was moving during the process, resulting in the final milling into the oval.
CNC machining center input tool radius compensation D not processing ah
Tool radius compensation using the use of a lot of attention, one or two sentences can not be said clearly.
CNC machining center which brand price is better?
There are eight thousand are high-speed machine you need to process eight thousand of your twenty thousand is far enough
Five-sided machining center and five-axis machining center What is the difference
Mostly complex horizontal machining center.
Mechanical processing, I was open CNC machining center! I would like to ask this f is what! F40 stands for something! How to calculate the amount of feed!
In the machining center F, the cutting feedrate is expressed in mm / min.
Vertical machining center lubrication system
the flow of compressed air to blow the oil into small oil droplets, attached The oil film is formed on the pipe wall, and the oil film flows along the pipe wall with the direction of the air flow. The thickness of the oil film is gradually thinned during the flow, but it does not condense.
What is the M code of the Mitsubishi Machining Center?
Previously in the school to learn milling machine teachers have not said, M100 is the table rotation B is the rotation angle. M13 is the spindle forward and cutting fluid open
Machining center with twist drill bit cast iron speed how much feed how appropriate
To drill diameter of 10 mm, for example, the speed can take 30 / 0.005 (radius) / 3.14 = 1900 rpm, the actual can take 1500 rpm more appropriate, the amount of feed can be based on empirical formula, select (0.01-0.02)