Grinding Wheels Come In Grades From Coarse To

Hot Products


Where is the precision casting factory?
Everywhere is. Look what you want to do
What is the difference between casting and stamping parts?
The purpose of forming processes is to allow the sheet to undergo plastic deformation without breaking the billet and to make the desired shape and size. In actual production, a variety of processes are often applied to a workpiece. Blanking, bending, shearing, drawing, bulging, spinning and rectification are several main stamping processes. The difference between stamping parts and castings: with thin, uniform, light, strong features, stamping can be produced by other methods difficult to make, with stiffeners, ribs, UPS or flanging of the workpiece, to improve its rigidity. Due to the use of precision molds, the workpiece accuracy up to microns, and repeated high precision, specifications consistent, you can punch out of the hole, lug and so on.
Lathe processing stainless steel casting parts to use what type of tool, the speed into the amount of how much tool angle
It has something to do with the size of your work, and it has a lot to do with the blade you're using right now.
What is the ejection angle of the die casting (Tan Gang)?
Because after the wax, wax parts will have a slight contraction, which is good for demoulding. Many moulds don't do the ejection angle
How to solve casting defect casting?
Different defects, different solutions, some shortcomings, the current domestic level can not be resolved
When there is no flaw detection for large casting parts, is there any crack inside?
According to the industry standards, within the scope of the standard requirements to determine whether the product is qualified
The casting defects of pores, trachoma how to repair?
If the repair after the high temperature resistance, choose LT737 high temperature repair agent.
What's the effect of casting copper?
Riga. Copper is copper components, promote the graphitization of the copper element, make dense tissue, and to refine and improve the uniform distribution of graphite, which can reduce the chilling tendency of the cast iron, but also can promote the formation of pearlite, has a favorable effect on the section sensitivity. Copper has the tendency to strengthen cast iron, ferrite and pearlite, so it can increase the strength of cast iron. The tensile strength and bending strength of cast iron almost increase with the amount of copper in it, especially in low carbon cast iron.