Raw Materials for Refractory:White Fused Alumina Sand, Alumina Fused Refractory, Bauxite Price of CNBM in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 13 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
White Fused Alumina sand ,Alumina Fused Refractory ,Bauxite Price of CNBM in China
1.Structure of Calcined Bauxite Sand Description
Bauxite is earthy mineral which consists mainly of Al2O3 , a kind of hydrated alumina containing impurities. According to the usage, It can be divided into the levels of Metallurgy, chemical industry, grinding, cement, and refractory. Clinker is pale yellow and dark grey. It is mainly used for high aluminum refractory material, and also can be used to make the fused corundum. Our materials of calcined bauxite is mainly D-K Style Bauxite Ore.
2.Main Features of the Calcined Bauxite Sand
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum
hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there. By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.
3.Main usage of the Calcined Bauxite Sand
(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc.
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department.
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties.
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries.
(5) in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects.
(6) manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.
4. Calcined Bauxite Sand Images
5. Calcined Bauxite Sand Specification
| Place of Origin: | Henan, China (Mainland) | Shape: | Powder | Material: | Alumina Block |
| SiO2 Content (%): | 0.04%max | Al2O3 Content (%): | 99%min | CaO Content (%): | 0.05% |
| Refractoriness (Degree): | Common (1580°< Refractoriness< 1770°) | Model Number: | WFA | Brand Name: | LY |
| Color: | white | True Density: | 3.95 g/cm3 | Mohs Hardness: | 9.0 |
| Primary Crystalline Phase: | Primary Crystalline Phase | Magnetic Material: | 0.0047% | Specific Density: | 3.88g/cm3 |
6.FAQ of Calcined Bauxite
1). Q: Are you a factory or trading company?
A: We are a factory.
2). Q: Where is your factory located? How can I visit there?
A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!
3). Q: How can I get some samples?
A: Please connect me for samples
4). Q: Can the price be cheaper?
A: Of course, you will be offered a good discount for big amount.
- Q: What are the structural properties of refractory materials provided by the manufacturer of the refractories include?
- For high efficiency continuous casting, molten steel will cause turbulence in tundish because of its fast casting speed. The sharp turbulence, on the one hand, breaks through the slag layer, involves the slag in the molten steel, and exposes the liquid steel to the air. It is oxidized two times;
- Q: what's the fire endurance of fireproof?panel?
- non-asbestos calcium silicate board, fireproof?panel partition will excced over 4 hours, two single 75 keel. 12 mm fireproofing calcium?silicate?board partition, through the monitoring of national fireproof construction materials quality supervision center, it's security and refractory time will reach over 4 hours.
- Q: What is the type of heat resistance property of high temperature electric furnace ?
- According to the levels of refractoriness : Common refractories: & Gt: 1580 ℃ ~ 1770 ℃ advanced refractories: 1770 ℃ ~ 2000 ℃ AAA refractories; 2000 ℃
- Q: Can anyone say something about what A-level fire-proof decorative material is?
- Now A-level market is very confusing. The major products are material monomer A-level and composite A-level, now a lot of B-level material is wrapped in calcium silicate board. The foam cement overall composite is level A, such as phenolic aldehyde composite, as well as some of the foam paddings, while monomer A-level includes rock wool, ultra-thin insulation panel and the like.. But there are few products with real sound A level qualification. Many manufacturers are playing the edge ball with A-level fire rating examining reports and B-level system detection reports and records, but this situation will not last long, which will soon be clear. I hope the information above can help you. Hope you adopt
- Q: What crusher is used for raw material of broken refractory material? What is the rough crushing process? What are the materials? Thank you!
- Common faults and causes of magnetic?separator. 1. Motor of magnetic?separator is overheated and its sound is not normal. Reasons for this failure are: 1) lubrication of bearing is bad or badly worn; 2)fan blade falls off or wears; 3)bad contact of switching circuit or disconnected to run a single phase; 4) voltage is too low. 2. Reasons for this failure due to overheated speed reducer are: 1) lack of oil or poor kerogen; 2) wear between gear and worm, or poor mesh; 3)poor lubrication of bearing or serious wear. 3. The sound of magnetic?separator during operation is abnormal, lattice ball mill. Cylinder is stuck by obstacle, and even the cylinder can not rotate. The bottom box vibrates. Reason for this failure is often that it is stuck by objects in drag flask, otherwise magnetic?patch falls off so that the cylinder screaks and pierce tube when it is serious. At this time, car should be stopped for maintenance and troubleshooting. Only when we master common faults and reasons of magnetic separator can we timely identify problems and solve problems. Better maintenance and repair of magnetic?separator equipment are an important prerequisite to properly use equipment and ensure the construction.
- Q: The manufacturing technique of refractory material
- The major components of alkaline refractory material include magnesium oxide and calcium oxide. The commonly used alkaline refractory material is magnesia bricks. The magnesia bricks with 80%～85% magnesium oxide has good resistance to basic slag and slag and higher refractoriness than clay bricks and silica bricks. It is mainly used in open hearth, oxygen blowing of converter, electric furnace and smelting non-ferrous metal equipment and other high temperature equipment. Refractory materials applied on special occasions include high temperature oxide refractory materials such as alumina, lanthanum oxide, beryllium oxide, calcium oxide, zirconium oxide, etc., refractory compounds such as carbide, nitride, boride, silicide and sulfide, etc., and high temperature composite materials, including metal ceramics, high temperature inorganic coating and fiber reinforced ceramics, etc. Consult and find reference for efractory materials production equipment, go to http://hi.baidu.
- Q: Who can tell somthing about how to choose fire resistant rating of fire resistance rolling shutter doors?
- According to the fire endurance, fireproof doors can be divided into A-grade, B-grade and C-grade, whose fire endurance should not be less 1.2h, 0.9h and 0.6h respectively. A-grade fireproof doors can be even applied to the material whose fire resistant rating is at secondary level. "Building Regulations" mention that fire resisting shutter can be used as partition of fire?compartment in those places where setting firewalls is not so easy. When using fire resisting shutter whose fire endurance includes unexposed surface temperature rise, its fire endurance should not be less than 3 hours. When using fire resisting shutter whose fire endurance doesn't include unexposed surface temperature rise, it should install closed independent automatic sprinkler system for protection on both sides, and the sprinkler sholud last at least 3 hours.
- Q: For refractory, why is it necessary to store the first mixing materials for some time under proper moisture and temperature?
- It is mainly to remove gas form chemical reactions in the pug, give full play to plasticity and binding properties of combined, and store unburned?brick whose cememting agent is phosphoric?acid or aluminium?phosphate for some time under proper moisture and temperature. For example, to avoid the formed bricks in the initial stage of drying and firing form cracking due to hydration of calcium oxide. Mixing materials is to store the first mixing materials for some time under proper moisture and temperature in order to improve the evenness and moldability of pud, such as making the distribution of combined clay and water more even. The length of storing chiefly depends on the process requirements and the characteristics of blanks. For the producing pug of high temperature kiln furnitures, the storing time is longer. The function of storing mxing materials varies with different natures of blanks. For honeycomb ceramics, it is to fully digest calcium oxide in blanks. For storing magnesia brick blanks containing much calcium oxide, it should be stored for some time in proper humidity and temperature.
- Q: How many types of fire-resistant material?
- 1. Acid fire-resistant material refers to one with more than 93% SiO2. It is featured by resistance to the corrosion of acidic slag ad high temperature and easy to react with alkaline molten slag. 2. Alkaline refractory material generally refers to one with magnesium oxide or magnesium oxide and calcium oxide as the main component. It has high refractoriness and strong resistance to basic slag. 3. Silicate aluminum refractory material refers to one with SiO2, Al2O3 as the main component. According to the content of Al2O, it can be divided into three categories: half siliceous (15-30% Al2O3), clay (Al2O3 30 ~ 48%), high aluminum (more than 48% of Al2O3). 4. Fused cast refractory material refers to shaped refractory products made by high temperature melting and casting.
- Q: Who knows how many poured refactory material are there?
- Pouring refractory material can be classified into the followings according to the body density: Heavy (> 2.0g\cm3), medium heavy (1.0-2.0g\cm3), light (0.4-1.0g\cm3); by binding agent: Combination of hydration, chemical binding, condensation, hydration and condensation: Clay, high alumina, silica, magnesia, alumina magnesia, magnesium and chromium, magnesium zirconium, silicon carbide etc.. Clay brick, high alumina brick, bead brick, silica brick, light mullite, alumina hollow spherical brick, oxidation zirconium hollow spherical brick, corundum brick, magnesia brick, magnesia brick, magnesia alumina spinel brick, magnesia chrome brick and so on
Send your message to us
Raw Materials for Refractory:White Fused Alumina Sand, Alumina Fused Refractory, Bauxite Price of CNBM in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 13 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
