Q:There is a little water with plastic sheeting can pave the floor?

Keep the ground dryThe floor needs to cement ground water in clean out before installation, otherwise it will produce a certain tidal wave, easily lead to the floor cracks, caused after the installation of the warped floor, so the floor before the cement ground moisture in row of clean, to ensure that the ground is dry.

Q:How to spread plastic floor tiles

Wet floor tile shop: cement and sand and water mixing into cement mortar (dry wet like rigid cement mortar plus a lot more). Before laying along the wall popped out of the ground elevation line, and then do the ash cake around the room, (ash cake is painted or pouring floor when Mason used to control the building elevation and surface flatness and verticality of cement blocks.) The surface of the cake should be lower than that of the floor, and the thickness of the floor tile should be lower. Finally, use a rubber hammer to crack down.

Q:To warm the original heat, the plastic floor above the surface of the floor to warm the heat emitted by the heat of the gas smell harmful to the human body?

Adding appropriate additives, in the sheet of continuous base material by coating or rolling process, such as the production of floor roll. Plastic floor leather, although difficult to burn, self extinguishing, but at high temperatures, will decompose harmful gases, excessive inhalation, suffocating

Q:Plastic floor how to taste?

We can Naganbu wet, dry for 2 minutes, mainly to prevent Bree water penetrated into the surface, and then take the wet cloth to clean the floor.

Q:Solid wood flooring on the back of plastic paper, why

First: in order to moistureproof.Second: in order to cover up some defects in the floor.Third: Pest control.

Q:With this plastic floor mat bed can not? Will not have any impact on people

This is used in conjunction with the infant floor, which belongs to (XPS) extruded plate and the like, the density is better. Better than foam board (EPS) slightly better, it is best not to shop on the bed as well......

Q:Now decorated with qVC plastic floor can do

Home decoration, sports, hospitals, supermarkets, classrooms and other places have applications. The advantage of PVC plastic floor is very obvious compared with other common floor

Q:The advantages of plastic floor tile

Super slip: wear-resistant layer PVC plastic floor surface has a special anti-skid, and compared with common ground material, PVC floor (plastic floor) in the sticky water situations. More astringent, but not easy to slide into the water, which is more astringent. 6, fire retardant: PVC plastic floor fire index up to B1 level, B1 level that is very good fire performance, second only to stone. 7, waterproof: PVC plastic floor is the main component of vinyl resin, and water affinity, so its nature is not afraid of the water, as long as not long soak would not be damaged; and not because of high humidity and mildew

Q:What is the material of the plastic foam plate

The general use of four roller mill factory plasticized PVC, after the pressure of the surface is smooth and smooth, cooling after the edge of the strip is the product

Q:PVC plastic flooring should be how to pave the road, want to shop this floor, but do not know PVC plastic floor price per square meter of stone? Tell me what the trouble!

For different horizon: 1, cement: Horizon must clean wet (if it is to be painted after the paint is dry), all cracks and holes with suitable fillers (such as gypsum). 2, wood floor: to ensure that the original floor clean, clean, no glaze, no wax, no oil, and firmly stick to the ground, the filling of all cracks and holes with the appropriate (such as gypsum). 3, PVC floor: remove all dirty oil or wax floors, must not be laid on the soft plastic or rubber floor, the floor will be removed or covered with a layer of three plywood, and the filling material is suitable for all cracks and holes (such as gypsum).