Product Description:
Light drywall metal stud for ceiling is using high quality continuous hot dip galvanized strip for raw material and it's a metal skeleon in building by cold rolling from process.
Product Applications:
Product used for internal constructions gypsum drywall partition such as hotels, terminal building, bus station, theatres, shopping malls, factories, office buildings, and etc.
Product Advantages:
1.Light,good strength,cauterization resistance and water resistance
2.Matching magnesium fire-proof board,gypsum board and many other wall and ceiling board
3.Moisure-proof ,shock-resistant,high-effcient and environmentally-friendly
4.Easy and fast for installation,time-saving
5. Prompt delivery, high quality ,competitive price and complete sets of styles
6.We can supply you the products based on your specific requirements
Main Product Features:
(1)Ceilig soild structure,good safety performance
(2)fram and light weight
(3)No rust,no corrosion,moderate,good linearity
(4)Variety of shapes roofs
Product Specifications:
Images:
- Q:Light steel keel should be how to strengthen, in order to make solid wood door installed more prison?
- Light steel keel wall strength regardless of Zeyang are a heart disease, if there is room, then the proposal is still good wall
- Q:What is the decoration of the wall? Lightweight bricks Or light steel keel frame?
- The effect is certainly not the same or the cement mortar is really some wall after the installation of the socket is not vague. The
- Q:Light steel keel wall can be installed sliding door
- How can not press ah. It is estimated that you are afraid of wood that you fooled you And your door is too big to shrink it. The normal door is 800. Get so much useless. Now the light steel keel wall is too much. How can we press the door.
- Q:Has installed a wooden floor, you can do in the above light steel keel wall?
- Can, to the dragon it to use a little bit of the screw, but look at your floor is still in the cement or above the floor to do in the cement above with a drill to pull the explosion can be a
With a long screw,
If it is done on the floor of the board it,
It is recommended to use a little bit of the screw to play on the above plus gasket
To do about the foot line, and the floor color, only to coordinate points
- Q:How to install light steel keel gypsum board wall
- In addition to the open slit, gypsum board wall vertical and horizontal joints (including gypsum board and between the gypsum board and the roof, side wall joints) must be caulked and paste the seam.
Dark seam handler:
(1) embedded in the putty: sweep the gap in the floating soil, with a small knife put the putty embedded in the seam and slit flat.
(2) scraping the bottom of the putty: caulk putty final condensate, in the joints on the scraping about lmm thick putty and paste the glass fiber band, and then from the upper and lower sides of a knife from scratch, so that the excess putty from the band Mesh out of the hole.
(3) scraping the middle of the putty: the bottom of the putty solidification and still in the wet, with a large knife putty putty, the glass ribbon buried in the putty layer, and the gypsum board wedge-shaped edge filled leveling.
8. Wall decoration Light steel keel gypsum board wall wall decoration practices, can be used to brush, paint, paint, paper or tile veneer.
- Q:Light steel keel wall and wood which low cost
- Should be a wooden keel, the general family decoration with a wooden keel on it, wood keel cost is low, to meet the family use, light steel keel cost high, but high strength. It is recommended to use wood keel
- Q:Curved gypsum board wall technology.
- The curvature of the gypsum board can not be bent directly into the required curvature; if slightly larger, you can spray a small amount of water or water bend into; and then a large curvature of the keel to be encrypted, with plaster slab splicing, and then putty leveling on the line.
- Q:Who used the light steel keel gypsum board to do the wall?
- Or do not use the light steel keel effect is not good or better brick I think a lot of places in the decoration are permanent investment so we must consider good for a moment of trouble or save money on the simple get
- Q:Light steel keel wall gypsum board seams how to deal with? Including smallpox
- First with gypsum board filling material to fill the gap, in the bandage, and then touch the strap on the 2 - 3 layer of joints, with sandpaper tied on the line friends
- Q:Decoration decoration works Light steel keel wall, layer 4 meters high thickness What are the requirements? There is no specific specification?
- Built-in steel structure Light steel keel wall construction technology - "Ridge built-in embedded steel components (along the keel fixed screw and wall equipment, fixed support frame) + Ridge + light steel keel wall + ", That is, in the ridge before the construction, will be along the keel fixed screw and wall equipment, fixed support frame fixed fixed; the use of ridge within the fixed screw to the keel and fire insulation cotton fixed on the ridge, Between the keel and the top of the floor, between the keel keel and the wall paving a layer of fireproof sound insulation cotton, forming a damping layer, reducing the amplitude; outsourcing gypsum board as a panel to form a lightweight wall. According to the use of functional requirements and design requirements, in the panel filled with sound insulation, fire, insulation and other filling materials.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
