thread drilling bit from China T38 dia76mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
We are specialized in rock drilling tools，such as taper button bit, thread button bit, Integral drill rod, DTH bit, DTH hammer, Air leg rock drill, Excavator Mounted rock driling and splitter, expansive mortar.
Product:
Thread Button Bits: High quality and several thread with various carbide tips like YK05 are available. All products can be developed upon customers' request. Premium designs and steel and premium tungsten carbide insert grade T6 supplied by Boart Long year, Offers industry-leading strength and penetration rates for more productivity, Excellent straightness and hole clean quality, Get max. drilling performance for rock drills with long life to save up fuel cost rate.
Description of button bit:
Our company supply all kind of button bits with Rope thread
R32-43MM, R32-45MM, R32-51, R32-64, R32-76;
T38-64, T38-76MM, T38-89, T38-102MM;
T45-76MM, T45-89MM, T45-102MM;
T51-89MM, T51-102MM, T51-127MM etc.
all face design, flat face, drop-center face, normal body and retrac body.more
Specification of button bit:
Thread | Diameter range | Skirt Design | Face Design | Button Design |
R22 | 35 – 45mm | Normal | Flat Face | Hemispherical |
R25 | 33 – 57mm | Normal | Flat Face | Hemispherical |
R28 | 36 – 51mm | Normal | Flat Face | Hemispherical |
R32 | 41 – 89mm | Normal | Flat Face | Hemispherical |
R35 | 48 – 51mm | Normal | Flat Face | Hemispherical |
R38 | 64 – 102mm | Normal | Flat Face | Hemispherical |
T38 | 57 – 102mm | Normal | Flat Face | Hemispherical |
T45 | 70 – 127mm | Normal | Flat Face | Hemispherical |
T51 | 76 – 140mm | Normal | Flat Face | Hemispherical |
T60 | 89 – 140mm | Normal | Flat Face | Hemispherical |
ST58 | 89 – 140mm | Normal | Flat Face | Hemispherical |
GT60 | 93 – 140mm | Normal | Flat Face | Hemispherical |
ST68 | 102 – 152mm | Normal | Flat Face | Hemispherical |
Company Profile:
CNBM is the largest state-owned enterprise in China building material & equipment industry. Up until October of 2011, our total assets exceeded RMB 190 billion, with 130,000 employees and over 300 subordinate companies. In the year 2012, we are ranked as No. 365 in World Top 500 Enterprises by Fortune, and No. 2 in global building materials industry, second only to Saint-Gobain.
FAQ:
1. Q: Can I get some samples?
A: We are honored to offer you samples for quality check.
2. Q: Do you have the products in stock?
A : Yes , We have sample for several models now could supply to you.
3. Q: What’s the delivery time?
A: It usually takes about 25 days to produce an order. But the exact delivery time might be different for different orders or at different time.
4. Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
5. Q: How does your factory do regarding quality control?
A: Quality is priority. Rock drilling tools workers always attach great importance to quality control from the every beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
6. Q: Will you deliver the right goods as ordered? How can I trust you?
A: Yes, we will. Our company is world top 500, that is the biggest supplier and manufacture in China, having a good reputation around the world.
7. Q: What's the payment you accept ?
A: As usual our payment is T/T, other payment can consider.
As the largest manufacturer and exporter of building materials in China, we avail ourselves of this opportunity to approach you for mutual-beneficial cooperation. If you want to know more, pls contact me freely.
- Q:How big is the screw hole at the back of the torch chuck? Is it a rebound?
- Screw head, some cross flower, six angle, etc.. Generally, the thread is covered with a lock gum.If you want to remove it, it should turn clockwise.
- Q:How do you drill a drill?
- 2, drill clockwise in the same direction, drilling tail down about 10 degrees angle, sharpening;3, drill once rotated 30 degrees angle or slightly larger, pay attention not to sharpen all other cutting edge, grinding two or three times;The 4 supporting point does not change, and the drill rotates 180 degrees, with the same method sharpening all other cutting edges;5, after grinding, the drill will be vertical (to make it natural droop), and hold it in hand, check whether the grinding bit is symmetrical with its center line;In case of asymmetric grinding, the angle between the cross blade and the cutting edge should be 50 degrees --55 degrees;
- Q:How to distinguish between electric hammer drill bit used
- Shape: only two general electric hammer drill: head and head! The tail is square square. The tail of the round head is round.. Round head is mainly used with light hammer, the tail has two slots. The square is mainly used for heavy hammer!Size: use caliper to measure the diameter of the alloy steel on the head.
- Q:Is it OK to drill holes on tiles with an ordinary bit? Will the tiles crack?
- An electric drill must, of course, be of good stability. It is a small vibrating one, and the stability of the new one is better than that of the old one.When you drill, take it easy and slow down.The position is not a problem. I've drilled both the middle and the edge. Please be sure to be slow and slow!
- Q:Do you have a drill with a diameter of 2.2mm?
- Yes, of course. As long as the drill is reasonable, there is no, you can grind it yourself
- Q:How big is the 6 bit that the worker says?
- Usually they don't talk about units, they just say the data, he says, 6 of the drill, that's the drill with a diameter of 6mm, that's right
- Q:What drill holes are used to break the screw?
- If the screw is broken and the drilling is not good, it is recommended to solve the problem with edm. A six or a slot is machined at the broken screw and then the screw is broken inside with a six square wrench or screwdriver. The electrode size is different, can process different sizes of broken screws, M3-M50 can.
- Q:What drills are used in stainless steel drilling?
- Drilling drills are often used on stainless steel workpieces. Hardened carbide can be made from carbide drills. If conditions permit, we can use super hard high speed steel or ultra-fine Grain Cemented Carbide bit. When drilling, the torque and axial force are large, the chip is easy to bond, difficult to break, and the chip removal is difficult. The work hardening is intensified, the corner of the drill is easy to wear, the drill bit rigidity is poor, and vibration is easy to occur. So the drill grinding chip split groove, grinding chisel to reduce axial force, grinding double angle to improve the radiating conditions.
- Q:How do the drills grind?
- A formula: "edge on the wheel surface." This is the first step between the bit and the grinding wheel, and it is often the students who have not cut the edges of the blade, so they start sharpening on the grinding wheel. It must be hard to wear. The blade here
- Q:What is the material composition of the electric hammer drill?
- Cemented carbide is a kind of alloy material made by powder metallurgy process of hard metal and bonding metal of refractory metal.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
thread drilling bit from China T38 dia76mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
