Product Description:
General information:
Cmax ceramic fiber blanket is made from high quality gao-ling clay, high purity alumina and silica oxides by spun or blown process. It is asbestos free. No chemical binder is added. Double-size needling provides blanket with great tensile or handling strength for easy installation. Blankets are available in various classified temperature from 1260ºC to 1430ºC.
Standard Sizes:
25*610*7200mm
50*610*3600mm
13*610*14400mm
25*1220*7200mm
50*1220*3600mm
Regular Density:
128kg/m3, 96kg/m3
Advantages:
Heat reflectance
Light weight
Flexible
Resilient to thermal stock
High tensile strength
Corrosion resistance
Easy to install
Asbestos free
Application:
Petrochemical process heater refractory fiber lining
Heat treating furnace or intermittent (shuttle) kiln hot face lining
General furnace backup insulation
Heat seals for kiln car or furnace door
Electrical insulator
High temperature acoustic
Fire protection
Non-standard sizes are available upon request.
TECHNIQUE DATA |
| STD | HP | HA | HZ |
CLASSIFICATION TEMPERATURE(C) | 1260 | 1260 | 1350 | 1450 |
WORKING TEMPERATURE(C) | 1000 | 1050 | 1200 | 1350 |
COLOR | WHITE | WHITE | WHITE | WHITE |
BULK DENSITY(kg/m 3 ) | 96/128 | 96/128 | 96/128 | 96/129 |
THERMAL SHRINKAGE 24HRS
(Density 128kg/m 3 ) | ≤ 3 | ≤ 3 | ≤ 3.5 | ≤ 3.5 |
THERMAL CONDUCTIVITY(W/m. k)
(Density 128kg/m3 ) | | | |
800C | 0.15 | 0.176 | 0.160 | 0.155 |
1000C | 0.170 | 0.220 | 0.180 | 0.230 |
1200C | - | - | 0.260 | 0.31 |
CHEMICAL COMPOSITION(%) | | | | |
Al2O3 | 45-46 | 45-46 | 53-55 | 38-54 |
SiO2+Al2O3 | 98.5 | 99 | 99 | 82-90 |
ZrO2 | - | - | - | 13-18 |
Fe2O3 | ≤ 0.4 | ≤ 0.3 | ≤ 0.3 | ≤ 0.3 |
- Q:Ceramic fiber insulation after moisture can still play a cold role?
- Ceramic fiber is an efficient insulation material, with light weight, high strength, low oxidation resistance, low thermal conductivity, good flexibility, corrosion resistance, low heat capacity and sound insulation and so on.
- Q:Who knows the advantages of the far infrared ceramic fiber?
- The heat transfer form of far infrared ray is to transfer heat by radiation and transfer energy by electromagnetic waves. When the heated object is shone by far infrared ray, a small portion of the radiation is reflected back and the vast majority is penetrated into the heated object. It greatly saves energy and is easy to make.
- Q:What is the feature of ceramic fiber gasket?
- Product features: 1）Continuous use temperature can reach 1000℃ while short time using temperature is up to 1260℃.2) It is highly resistant to acid-base corrosion and molten metal (eg. aluminum and zinc) erosion. 3).It is good in high temperature strength and thermal insulation properties (please refer to physical and chemical indicators.) 4) It is better in electricity insulation than glass fiber. 5) It is non-toxic, harmless and odourless.
- Q:800 what material does the pipe keep warm?
- Ceramic fiber blanket can be used.Ceramic fiber blanket, also known as aluminum silicate fiber blanket, also known as aluminum silicate double needle blanket.
- Q:What’s the difference between heat preservation and heat insulation ceramic fiber blanket and rock wool blanket?
- The difference between heat preservation and heat insulation ceramic fiber blanket and rock wool blanket: refractory ceramic fiber material is a kind of lightweight and efficient heat preservation and heat insulation material. Its advantages are as follows: the volume and density of ceramic fiber as lining are low. Ceramic fiber lining is 75% lighter than lightweight insulating brick lining and 90%-95% lighter than lightweight castable lining. If fiber lining is adopted, steel structure load of furnace can be greatly reduced and the service life of the furnace can be prolonged. Heat capacity (heat storage) of ceramic fiber as lining is low: Heat capacity of ceramic fiber is about 1/10 that of lightweight and heat resistant lining and lightweight castable lining. Heat capacity of furnace lining material is proportional to the weight of the furnace lining. Low thermal capacity means that furnace absorbs less heat in the reciprocating operation and, at the same time, the speed of warming gets faster, which greatly reduces the energy consumption of the furnace temperature operation and control and especially plays a very significant role in energy saving effect in the starting-up and blowing-out of heating furnace. Thermal conductivity of ceramic fiber as lining is low: When the average temperature is 400℃, 600℃ and 1000℃, thermal conductivity coefficient of ceramic fiber as lining is less than 0.1w/mk, 0.15w/mk and 0.25w/mk respectively, which is 1/8 that of lightweight fireclay brick and 1/10 that of lightweight and heat resistant lining. Ceramic fiber as lining has prominent insulation performance. Ceramic fiber as lining is easy to construct: Expansion gap is not needed during the construction process. Construction personnel can start to work after basic training and construction technology has little effect on the heat insulation effect of lining.
- Q:What is the difference between aluminium silicate needled blanket and aluminium silicate fiber felt?
- White color, regular size, set fire-resistant, heat insulation, insulation in one, without any binders. When used for a long time in the neutral and oxidizing atmosphere, the aluminum silicate needle blanket can still maintain good tensile strength, toughness and fiber structure. The temperature is 950-1414 centigrade. It has chemical stability, thermal stability, sound absorption and noise reduction performance, high tensile strength, low thermal conductivity and low thermal capacity.
- Q:What is the performance of ceramic fiber tube furnace?
- The performance of ceramic fiber tube furnace is good, mainly used in small volume production and experiments of colleges and universities, scientific research institutions, industrial and mining enterprises. Ceramic fiber tube furnace is safe and reliable, easy to operate, and is of high accuracy of temperature control, good effect of heat insulation, wide range of temperature, high uniformity of furnace temperature, various temperature zones.
- Q:Who knows the density of ceramic fiber board?
- The density of ceramic fiber board is 280-320 kg/m3. Ceramic fiber board is made by wet vacuum forming process, whose strength is higher than that of fiber blanket and vacuum forming felt. And it can be applied in such high temperature field that requires products with rigid strength. Here follows its features: high compressive strength and long service life; low thermal capacity and conductivity; non-brittle material and good flexibility; accurate size and good flatness; easy to cut, install and work; high resistance to weather; continuous production, uniform distribution of fiber, and stable performance; excellent sound absorption and noise reduction.
- Q:Are ceramic fiber cotton poisonous?
- No poison, carpet fiber silk if coarse, there is a little prick, make the skin may itch.
- Q:What is the difference between thermal insulation cotton and thermal insulation sand?
- Rubber and plastic panels: with excellent fire resistance. In accordance with the national standard GB/T17794-1999, "building materials combustion classification method", rubber sponge insulation board was tested to determine "GB/17794-1999B1" refractory material. The service temperature range is from -50 DEG C to 110 DEG C.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
