Professional fiberglass mesh for waterproofing with CE certificate
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 g/m²
- Supply Capability:
- 4000000 g/m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
Product Introduction
Fiberglass mesh, alkali resistant fiberglass mesh is on the basis of alkali-resistant or C-glass or E-glass woven fabric, then coated by acrylic acid copolymer liquid.
Characteristics: Good alkaline-resistance, high stength, excellent alkali and acid resistance, good cohesion, excellent in coating etc.
Uasge: Ti is widely used in wall reinforce, out side wall heat insulation, roof waterproof, reinforcement, plastic, bitumen, plaster, marble, mosaic. Etc. It is an ideal engineering material in construction.
Our best quality ablity:
1) mesh of warp and wet mesh is very straight
2)coating enough alkaline resistant glue and keep 60%-80% strength after testing in NaOH 28 days later
3)Made by C-glass or E-glass fiber roving as basis material and then treated with acrylic acid coplolymer liquid.
Products | Weight sq.meters(g/s.m) | Mesh size (mm) | Roll size (50sq.meters) | quantity of rolls in one container 40HQ | Color | Package |
Fiberglass Mesh | 60g | 4X4-10X10mm | 1m*50m | 4000 rolls | White | Bulk,plastic,caton or as your demand |
(fiberglass net) | Blue | |||||
70g | 1m*50m | 3500 rolls | ||||
80g | 1m*50m | 3000 rolls | Yellow | Certification | ||
90g | 1m*50m | 2900 rolls | ||||
100g | 1m*50m | 2800 rolls | Black | ISO9001:2000 | ||
110g | 1m*50m | 2700 rolls | MOQ | |||
120g | 1m*50m | 2600 rolls | Red | 75000 or one container | ||
130g | 1m*50m | 2550 rolls | ||||
140g | 1m*50m | 2500 rolls | Green, | Delivery time | ||
150g | 1m*50m | 2450 rolls | ||||
160g | 1m*50m | 2400 rolls | etc. | 10 days |
- Q: How is fiberglass mesh used?
- The wall should be cleaned before paving and the pits will be patched and leveled
- Q: How do you paste the mesh cloth on the back of the stone?
- At the bottom of the stone board, besmear the resin glue, and then adhere to the fiber mesh cloth, forming tensile waterproof layer, but must not forget to brush in the side.
- Q: What kind of wall fabric is covered with fiberglass mesh? Do you apply the powder or the powder? Thank you
- Most of the fiberglass mesh is used for the powder, but also outside powder, but at present there is no domestic how expensive, too expensive!
- Q: The building is how to choose the external wall thermal insulation material of glass fiber mesh cloth?
- When the heat of the interior passes through the wall mesh, the insulation will be cut off and retained, and when the room temperature falls. The wall of the heat will be released, by adjusting the indoor temperature; in the summer, glass fiber mesh insulation would block the sun's radiation and external heat into the room, so that the indoor situation of "cool", and the ten seasons and pleasant residential Polygonatum and physical skills improved significantly
- Q: Do external insulation with alkali resistant fiberglass mesh cloth, why should the first layer be double or thickened?
- Therefore, the first floor insulation system adopts double-layer grid cloth and thickening protection layer, so as to enhance the impact resistance capability of the external insulation system.
- Q: Method for sampling alkali proof glass fiber mesh cloth
- The polymer mortar ratio is: KL binder: 425# sulphoaluminate cement: sand (with 18 mesh screen bottom),:=1:1.88:3.25 (weight ratio).
- Q: Glass fiber mesh fabric quality, hard and soft for wall, which is better?
- Soft mesh does not depend on the quality of the mesh fabric. Depends on how much the glue is.
- Q: Glass fiber mesh cloth bent do to straighten it?
- Can be divided into gold pot and earthen pot, the general earthen pot product soft and hard to control, because the surface of the pot products are generally coated with urine glue, gold pan surface coated with emulsion, quality is good, control some. Soil pot products only two kinds of hard and soft state, one is hard, then the product is slightly, but the texture is brittle, the tensile resistance is not good, it is easy to break ninety percent off, a state is soft, this product is pulling resistance is large, but not so on the location, soil pot coated urine glue products, soft and positioning the product is contradictory, hard, good positioning effect, small tensile strength, soft, poor positioning effect, large force.
- Q: What is the difference between alkali resistant fiberglass mesh and glass fiber mesh fabric?
- Alkali resistant glass fiber mesh cloth on the alkali or alkali glass fiber woven fabrics based coating formed by the alkali, the product of high strength, good bonding, docile, excellent positioning, widely used in the reinforcement of walls, wall insulation, roofing and other aspects
- Q: Can indoor glass fiber mesh cloth be stuck with wall tiles?
- Yes, glass fiber mesh is used for roofing, waterproofing and gypsum, marble, mosaic and other wall or plate reinforcement.
Send your message to us
Professional fiberglass mesh for waterproofing with CE certificate
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 g/m²
- Supply Capability:
- 4000000 g/m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords