Professional Diamond Sharpening Tools double sided whetstone
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Professional Diamond Sharpening Tools double sided whetstone
Two Sided Diamond Knife Sharpener
1.Diamond coated 360&600grit
2.Plastic Material: ABS
3.Length:4inch
Widely used for outdoor knives, garden tools etc.
Diamond-electroplated ensure efficient and sharp sharpening result
Double sided diamond design for best choice (360Grit as coarse sharpen, 600Grit for fine honing)
Folding cover design to protect surface of diamond sharpener, also easy to carry.
how to use :
First open sharpener cover, Complete one or both of the following steps depending on how blunt the blades
Step 1, 360grit for coarse sharpening: suitable for a blunter knife.
Start the coarse 360 grit of the stone, move the blade back and forth over the stone at an angle of 10 - 30 ° by using light pressure.
Generally sharpen the tools with coarse stage every six months or as required.
Step 2, 600grit for fine honing; it is a necessary step for the elimination of burr on the knife, and makes the blade smooth and bright
It is recommended to do it approximately once a week.
Clean the knife with the water or wiper and dry it after use and clean the knife sharpener with banister brush.
note:
1. Please hold sharpener tightly when sharpening
2. Please put sharpener well to prevent diamond surface from contaminating after use.
Product Show
- Q:With a fixed angle knife also used to use the kind of Zwilling two grooves directly on the top of the mill?
- Easy to buy oil as long as the use of sewing machine oil can be, then you do not have to sharpen the knife, said the two are not suitable for grinding Samurai sword.
- Q:Do you have a Tupperware sharpener?
- Very practical kitchen tools, I only know there is such a sharpener, see colleagues, hand, and found that the design is reasonable, the station is very strong, easy to pull a few knife, really become a front Dumbledore, excited all the knife home wear again, including scissors!
- Q:What is a sharpener? What is the specific working principle? What are the advantages and disadvantages?
- The knife sharpener is a scientific, practical, efficient and convenient sharpening tool. Applicable to all kinds of kitchen knives, which is characterized in that the traditional single knife to double knife, sharpening method, angle changed efficiency, cutting the most blunt no more than half a minute, and make it very sharp, its efficiency is really incomparable, the knife sharpener is for special material material processing refined, long service life, simple operation and cheap, it is an indispensable housewife good helper, not only the ideal is a knife wound
- Q:Can a Zwilling knife be sharpened by another sharpener?
- Can be self grinding, blade angle to the original angle. I am self grinding, the effect is good, with the purpose of 3000 ruby stone.
- Q:Is it possible to use an ordinary whetstone? Will not damage the tool?
- Zwilling is as good as cattle ah, even the sharpener is dedicated!
- Q:Stainless steel kitchen knife blunt how to profit? I sharpen the knife sharpener seems more blunt
- 1, the grindstone on sandpaper grinding, from the bottom to the top of the grinding stone, until the grindstone uniform color, pay attention to the grindstone and sandpaper to dry2, wash the grindstone, the first knife to the rear, the right hand holding the handle, forward and backward grinding under the 8, and then change a face, the former one after grinding3, continuous grinding for twenty minutes
- Q:Enrich the knife sharpener?
- In fact, no matter what the knife, as long as it is good, you can look at the Baidu, Fumin knife factory staff will give you a solution! Hope to help you. Hope adoption
- Q:If there is no counter near the mill, you can grind it?
- Can be their own grinding. However, in the traditional sharpening knife, because the power is difficult to grasp, easy to damage the tool. Recommend the use of Zwilling's stick or knife sharpener. The method is very simple.In addition, we should pay attention to the blade is the less grinding steel, for new products, as long as the general back and forth grinding 2 times, the sharp effect has been restored.According to the different characteristics of each knife, choose the right knife to use, can maintain sharp.Specific to my space to see Zwilling Henckels
- Q:Is the kitchen knife a single blade? Can the sharpener be worn?
- Depends on what you mean by a single bladeThe knife is single edged + double edged
- Q:Sharpening stone and sharpening rod which make
- You have to look at what to do with the edges of open front should use the grindstone three steps in the most thick about 200 mesh or a blade and then use about 500 of the burr and then polishing about one thousand meshes are generally not edged from ordinary knife before two step is enough if you are collecting or play knife appearance and extreme sharpness can add third step if the sharpness of the knife is hard to add a step with ruby grindstone (3000 mesh) and agate grindstone (8000 to 10000).If your knife is paused or just ordinary kitchen knife sharpener with rust. It can only be used for ordinary knife usually use tableware like playing with a knife sharpener, sharpener tube are called destroy knife can only be a few weeks with a knife grinding rust
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Professional Diamond Sharpening Tools double sided whetstone
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
