Polycrystalline Solar Panels-5W-Apply to Small Solar System

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
10000 watt
Supply Capability:
50000000 watt/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Description

Solar Monocrystalline Series Panels

Introduction of Monocrystalline Solar Panels

CNBM Solar photovoltaic (PV) Panel is designed for large electrical power requirements. It is the optimal choice for both on-grid and off-grid power systems. CNBM Solar panel offers high performance of power per square foot of solar array. Monocrystalline silicon(c-Si): often made using the Czochralski process. Single-crystal wafer cells tend to be expensive, and because they are cut from cylindrical ingots, do not completely cover a square solar cell module without a substantial waste of refined silicon. Hence most c-Si panels have uncovered gaps at the four corners of the cells.

 

Characteristics of Monocrystalline Solar Panels

I Solar Cell : High efficiency crystalline solar cell. Even if under the weak light, the solar module can produce maximum power output.

II Tempered glass (toughened glass): Anti-reflecting coating and high transmission rate glass increase the power output and mechanical strength of solar module.

III EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.

IV AI frame: Without screw, corner connection. 6 holes on the frame can be installed easily.

V Junction box: Multi function junction box with water proof.

VI Long lifetime: ≥25 years; Less power decrease

VII Good performance of preventing from atrocious weather such as wind and hails.

VIII Resisting moisture and etching effectively, not effected by geology.

 

Standard Test Conditions of Monocrystalline Solar Panels

The opto-electrical specifications shown below are stabilized values being measured at Standard Test Conditions, Irradiance: 1000W/m2, Spectrum: AM1.5 at 25°C, The info below is subject to manufacturing tolerances. Where appropriate minutes of measurement are available and are used for the dimensioning of the installation.

 

Advantages of Monocrystalline Solar Panels

1.High reliability with guaranteed -3% to +5% power output tolerance, ensuring return on investment
2. High conversion efficiency based on leading innovative photovoltaic technologies
3. Withstands high wind-pressure and snow load, and extreme temperature variations
4. Attractive appearance Unique frame design, high mechanical strength, and easy Installation 

 

Characteristics of Monocrystalline Solar Panels

 

Max Power Voltage Vmp (V)

17.3V

17.4 V

Max Power Current Imp (A)

0.29A

0.58A

Open Circuit Voltage Voc (V)

22.2V

22.4V

Short Circuit Current Isc (A)

0.31A

0.63A

Max Power Pm (W)

5W

10W

Temperature Coefficient of Cells

 

NOCT

47±2

Temperature Coefficients of Isc (%/)

0.06

Temperature Coefficients of Voc (%/)

-0.33

Temperature Coefficients of Pmp (%/)

-0.45

Mechanical Data Solar Monocrystalline Series

Power

5W/10W

Dimension

250×250×25mm/300×350×25mm

Weight

1.4 kg

Tolerance

±3%

The dimension of the modules can be changed according to the demand of clients Limits.

Operating Temperature

–45 °C to +80°C

Storage Temperature

–45 °C to +80°C

Max System Voltage

700V

Guarantee Solar Monocrystalline Series Panels

Products Guarantee

2 years free from defects in materials and workmanship

Performance Guarantee

No less than 90% within 10yrs and no less than 80% within 25yrs

Certificates

IEC, ISO, TUV, CE

 

Dimension of Solar Monocrystalline Series Panels

 

Polycrystalline Solar Panels-5W-Apply to Small Solar System

 

Polycrystalline Solar Panels-5W-Apply to Small Solar System

 

Polycrystalline Solar Panels-5W-Apply to Small Solar System

 

Polycrystalline Solar Panels-5W-Apply to Small Solar System

 

 FAQ

 

We have organized several common questions for our clientsmay help you sincerely

 

1.    What’s price per watt?

A: It’s depends on the quantity, delivery date and payment terms of the order. We can talk further about the detail price issue. Our products is high quality with lower price level.

 

2.    Can you tell me the parameter of your solar panels?

We have different series of cells with different power output, both from c-si to a-si. Please take our specification sheet for your reference.

 

3.    How do you pack your products?

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

 

4.    What is your warranty system?

 Our product performance guarantees for 25 years

12 years guarantee for workmanship

Timeliness of delivery

Quality Products certified (TÜV, UL, CE, ISO)

 

5.    How do you pack your products?

We have rich experience on how to pack the panels to make sure the safety on shipment when it arrives at the destination.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:environmental benefit of solar panels?
I'm okorder.com/ I hope this gives you some insight and at least a start. Enjoy.
Q:Can I use a 250 watt solar panel to power a medium sized upright fridge?
Solar panel alone? No. With the appropriate storage system and inverter, perhaps. You will need to do the calculation - as follows: In a solar day that averages about eight hours, you will generate about 67% of your rated output over those 8 hours. That means you will have made 340 watts. Your refrigerator will run for about four (4) hours per day on average if you are very careful about opening and closing. If you have a 400-watt (average-when-running) fridge, you will have a small cushion that will be absorbed by inverter losses, charger losses and so forth. So, with an adequate set of storage batteries, a good charger and a good inverter, you just might be able to operate that small fridge. No icemaker, no other power drains. But, two 250-watt panels would be better.
Q:why aren't solar panels for your house more affordable?
Depending on where you live, the combination of federal, state and city tax credits and rebates can offset the cost of solar panels substantially. Even so, unless you use a lot of electricity, it may take a few years for the panels to pay for themselves. You are essentially paying for your electricity in advance. The more you use and the more it costs per kW/hr, the quicker the cost will be offset by the savings. Don't install solar panels on a home you're renting or one that you will likely sell in the next few years. It's not practical to un-install them and move them to a new house. Energy conservation is the way to cut your enery bills with the lowest up front cost. If you haven't had an energy audit, see if your energy provider does them at low or no cost. Install timers on air conditioner thermostats. If you have electric water heating, have a timer installed on that as well. Water heating is one of the biggest energy wasters out there. Why keep the whole tank of water hot when you only use it in the morning to shower? If you have your heart set on having solar panels but can't afford the upfront cost, research the companies that do installations in your area. Some have lease and lease/purchase options now.
Q:Solar panel question?
4 in series for the 48V, a rack of 3 sets wired in parallel to give the current. (total of 2 panels)
Q:how do i pick out solar panels to match my battery bank?
I don't know where you got the idea you have 8 hours of sunlight. Assuming clear skys and no dust, forest fires, clouds or other impediments, the average sunlight available in North America averages out to approx. kw/sq. meter. That's the maximum available, at midday. Multiply this be the efficiency of the cells (I assume about 0%) and it means about 00 Watts/sq m. Since you have said you have a tracking system, this works out to about 00 * .344 * 2 = 43W/h per day (per sq. meter).
Q:what are solar panels?
every time i hear the word solar panels i think those large or small flat shiny black or grey surfaces that absorb the sunlight and convert the heat and so on so forth into energy like electricity But ...i dont know how they fully work really so, i dunno.
Q:DIY home solar panels?
Not a good idea. The reason why panels are that much more expensive than cells is that the panels themselves are not that cheap either. If you start with the cells, you'll need - mechanical protection (hail, ice, snow) - electrical protection (i.e. waterproofing - if water comes in contact with the cells and wires, you'll get electrolysis which will corrode your wires and contacts faster than you can say 'b*mmer') - that setup will need to withstand temperatures between -20 and +30 °C (only guessing, might be worse) - oh, and the side facing the sun must be transparent (as far as possible) Now as to connecting the stuff: no, it will be neither easy to connect it to the house power nor to the grid - which is why that step (at least) in all countries I know of must be done by a certified electrician. If you get it wrong and you're lucky, only _your_ inverter will explode. Regarding the power: these 4W per cell (or kW for your shed) is the peak value, i.e. with the sun shining orthogonally onto the cells on a clear day. Since this (for a fixed installation) will only be true (at most) for a few minutes on a few days each year, your overall yield will be significantly less, probably more like 4 kWh/day for each clear day for each kWpeak you install _IF_ the shed roof is oriented exactly south and inclined towards the sun's noon position at the spring/autumn equinox (i.e. inclination angle = your geographical latitude). How many clear days do you have in britain? Yes, I had a similar idea for myself - but for one thing, the registered companies I addressed apparently weren't really interested in that small fry, plus the cost of the system + setup would barely have been amortized after the expected lifetime, even taking into account the (german) governmental subsidies. If I had the money to spare, I'd rather invest in a communal solar park. Much better ROI, the large installations get much better prices (per kW) for the setup.
Q:Can you tie small-scale solar panel system into household electrical system?
Grid tie inverters are expensive, but you might find a used one cheap on E-Bay, Crags list. Almost any grid tie inverter will work as you are thinking low power, but it likely needs to be 50 hertz or 60 hertz, which ever you have, and 230 volts ac or 20 volts ac which ever you have. It will work for a range of dc voltages, so your solar panels need to produce voltage near the center of that range. I considered buy the 3 PV panel set of 5 watt panels that Harbor freight sells. but I did not determine if the three panels can be conveniently connected in series to produce about 50 volts at light loads, or 00 volts if you buy two sets. You probably do not need the load controller, that comes with each set. I think most grid tie inverters automatically adjust to the dc voltage you supply them, unless it is below some minimum such as 50 volts. It is illegal to connect ordinary inverters to the power company, but they will probably not notice a small system unless you burn your house down. Most inverters will phase lock with the power companies frequency, but they are not designed to do that, so bad is likely unless you connect a resistor such as 0 ohms at 00 watts in series with the ac out of the inverter. If the resistor smokes you should disconnect promptly, then try again to see if you can get phase lock quickly. No smoke, likely means you are one of about 000 co-generators on the electric grid, You can short out the resistor with short piece of very fine wire which will hopefully melt if something goes wrong, such as the power company not sending electricity for 0. seconds or longer. Nearly all inverters have an over load feature, so the thin wire is a back up. Please be careful as people sometimes don't survive an electric shock at 20 volts.
Q:how would you build a solar panel?
As a sandwich. Glass Space /4 inch Glass Space with copper radiator painted flat black. Box made of wood. with the inside painted black. Insulate the back side. Use water with RV antifreese. Circulate water through with a small pump. Face it toward the sun. Thermal water solar Panel.
Q:Solar Panel questions...?
the first person is absolutely wrong. A 200 watt panel is $000US. By the time you buy mounting systems, wire, inverters, electric panels, interconnects, labor and permits/inspections, the cost is about $7/watt. if you use 700 kw-hr (please look at the units, you use kw-hr NOT kw) per month that 24 kw-hr per day. in your area, a pv system will supply about 4 hours at peak production of the panels, so you will need 6kw in panels, that's about 30 panel or $42,000 in equipment.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range