Poly Solar Panel HSPV265WP-156-72P

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
Supply Capability:

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


※ High efficiency crystalline silicon cells.
※ High transmission low iron tempered glass, strong mechanical resistance.
※ Standard waterproof junction box, with bypass diode.
※ High endurance to different atrocious weather
※ IEC 61215 and IEC61730 Class A certificates
※ Conformity to CE.
※ Applicable to residential roof top systems, On-grid/Off-grid utility, commercial system.
※ 10-year quality guarantee and 10 - 25-year power output guarantee.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Need Solar Panel Guru.....?
Basically, the answer to your question is forget it. Your approx 8 tons of AC will require about 28 KW of electricity just to run them. Add the rest of the house requirements and your talking a load of 50KW or more. Even if your state has a subsidy program, (and most of them are out of money now), it's a $200,000. system. Making your own panels would be a mistake. Reliability and survival are the key measures for a panel system and homemade panels are just not going to be reliable enough to survive the cold winters. In the end, it is always cheaper to buy good, conservatively rated commercial panels, especially in view of the fact that prices have been tumbling lately. Often, the mounting, interface and conversion costs are greater than the cost of the panels themselves. You might save some bucks by fabricating a mounting framework yourself and installing it, but such a system would not qualify for most state programs and.... you had better be an expert architect or engineer to put together something that will work well. The basic problem after all of this is that your maximum demand will be at night and the panels put out nothing at night. Better to forget about a 00% solution. You can install a modest 0 - 20KW system for perhaps $50,000 costs after rebates and subsidies and perhaps ... it might cover about /4 of your energy needs and might just, pay the investment back in 0 to 5 years. Get first rate equipment and professional installation, if you want the system to perform reliably. Solar voltaics make a lot of sense for Arizona and perhaps Florida. For anyone north of the Mason Dixon line however, fossil fuels are cheap, reliable and work far better.
Q:Building my own solar panels?
Create okorder.com/
Q:Why are solar panels still so expensive?
We all would love to have solar panels, I wish I could afford them for my house! The fact of the matter is that the amount of energy used to make solar panels doesn't really make it beneficial. They would have to have a better way of manufacturing them, a way that uses less energy. Basically they don't make up for the energy lost in their production .Despite our efforts there is no fuel like fossil fuel.
Q:Can cold light make solar panels power
The drawback of solar thermal power generation is that the efficiency is low and the cost is high, At least 5 to 10 times more expensive than ordinary thermal power plants.
Q:what is the volts of 75watts solar panel?
Many of the panels used on homes are designed to produce 2 volts DC. 0 of them wired in a series would produce 20 volts DC. An inverter is used to change the DC voltage to AC. The other aspect of electricity is amperage. With electrical units wired in series the voltage is added. When they are wired in parallel the amperage is added. The Volts x Amps produced will give you the wattage. A wise homeowner will examine their electric bills or the equipment used to determine their demand. They will consult tables that let them know how much sunlight their area receives each year as this will alter the rated performance of the panels. Then they will try and determine how much of the demand they want to fill. 80% may be economical. Then they also want to determine what they will do with excess electricity that may be produced during the summer months of intense sun and how they will supply the shortfall of low sun winter months. From all this they will determine the number of solar panels they need to purchase.
Q:Why are solar panels placed on the roof of houses?
In most cases the roof gets the most exposure to the sun. However Panels can be mounted in the yard on platforms that follows the Sun's movement. One must take into consideration of where the panels will get the most exposure to the sun.
Q:Question about solar panels?
One key piece of information missing is the average number of peak sun hours per day. This will vary by location. It is latitude, regional weather, and site shading must be considered. Another consideration is the loses. The 60 watt solar panel is a DC voltage. The 2300 kWh is for the AC power consumed. There are loses in the inverter to change the electricity from DC to AC. There are also loses for wire resistance, soiling of the panels, wire resistance, etc. To work out an example of the math, I'll use 5 peak sun hours and a total efficiency of 80%. The math can be worked out as a single formula but I'll break it into steps for you. (2300 kwh/month)(month/30.4 days) = 75.65 kWh/day (60 W)(5 psh)(80%) = 240 Wh/day = 0.24 kWh/day/panel # of panels needed = Energy use / Energy generated (75.65 kWh/day) / (0.24 kWh/day/panel) = 36 panels.
Q:adding more solar panel & battery?
You can wire solar panels in parallel (i.e. positive to positive, negative to negative). Preferably, the panels should be similar to allow the output voltages to track. Otherwise, it may be necessary to include diodes in series with each panel so voltage variations do not have an adverse effect. The other alternative is to have the panels charging individual batteries and then combining the batteries through diodes before using the inverter. This approach would require separate charge controllers for each battery. Not quite as energy efficient as each diode causes a voltage drop (and so a power loss).
Q:Solar Panel System at Harbor Freight?
Solar Panel through charge controller to battery, battery to inverter, inverter to devices. a 75 watt panel would be enough to trickle charge a battery that is NOT being used to keep it at full charge. The average home requires 4000 watts MINIMUM. This would require MANY, LARGER panels, charge controller, a battery stack, and at least LARGER inverter (preferably 2, 2000 watt inverters, unless you want to REALLY get expensive!)
Q:does vibration affect solar panels?
clearly. if the panel is moved, its action will be distorted. it should be kept in a level, stable location to reduce likelihood of such events occuring.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range