Q:Can TP protective film keep screen from breaking?

Explosion-proof membrane is ok ~

Q:Does anyone know of a glue that sprays up to form a protective film?

Is it for drawing? The glue can be mixed with water and stir well. Pour into the spray gun and spray.

Q:The site is now waiting for acceptance, but the door on the layer of protective film to tear up a lot of trouble, one day only to tear two or three, now with a hair dryer blowing while tearing effect is not significant, this is the door looks like plastic doors, the speed for master pointing.

Get some soap water or detergent water or washing powder against water, and then slowly tear.Water with sulfuric acid, otherwise it will corrode, soaked with a clean ball.

Q:Cover the surface of metal plate with protective film.

The film itself may be coated with a layer of glue. Thus it's no need to use other adhesive tapes. If you use double-sided adhesive tape, I recommmend this kind. This kind of tape won't fall off even if it ages owing to damp and high temperature. If the film feels not adhesive, it doesn't mean it's not coated with glue because generally, the adhesion of protective film is very low that you can hardly feel it.

Q:I am a beauty shop, into a number of forming universal car door, bowl, protective film, but how all paste is not good, not wrinkled, that is, there are bubbles can not get out, what is a good way to paste it?

You won't first ask an expert to come over and stick to it once. If you learn it once more, don't you OK?

Q:The protective film on the top of the stainless steel is torn and sticky

3. Use nail polish. The usage is similar to alcohol acetone. The effect is also good. Washing water does not require quality, good or general, as long as you can wash off all nail polish. 4. With hand cream. First, the surface of the printed products tear off, and then put some hand cream on top, slowly rub with your thumb, rub for a while, you can rub the residual gum are rubbed down. Just slow down. Hand cream is a kind of grease, which is not compatible with gum. Remove glue is to use this characteristic. These third and fourth are introduced in the Central Television 1. The material is easy to find and convenient to remove.

Q:why do some marks appear on the suface after PC+ABS specular products are coated with protective films?

The phenomenon occurs because film is covered unevenly when some parts are perfectly coated but others are not. In such a condition, the PC+ABS material changes as the temperature and humidity change, forming bubbles. Of course, there's something to do with the glue of the protective film. If highly required, protective film must use specific glue.

Q:Is there any skillful way to remove the protective film on aluminium-plastic panel?

Blowing it! Dismantling the panel to remove the film and installing it again is really troublesome! You can heat the film with high-power electric hair drier or fire. And then put somewhere cold to cool it down for a night. Then it will be easy to remove.

Q:How many kinds of glue do you want to protect the film?

Therefore, acrylic adhesive protective film varieties, for manufacturers of stock, inventory, applicable, rubber based protective film is much simpler. The second advantage of rubber protective film, but also because of tolerance, so we can use the high viscosity protective film, it is especially applied in processing complex, such as stainless steel, aluminum and other stamping processing.

Q:How to remove the mobile phone protection film?

Which membrane is it? Mobile phone originally brought, or later affixed to the protective film? The former is relatively easy, with a small needle or a knife, carefully stir a corner (do not draw to the screen)