Product Description:
Motor Grader Gr100 7 Ton, Graders
Product Details
Basic Info.
Model NO.:GR100
Type:Grader
Certification:ISO9001: 2000
Condition:New
Operating Weight(Standard):7000kg
Rated Power/Speed:75/2400kw/Rpm
Export Markets:Global
Additional Info.
Trademark:XCMG
Packing:Container
Origin:China
Product Description
Motor Grader
Motor Grader is earthworks shaping and leveling operations for major machinery, widely used in roads, airports, construction sites and other large area of ground leveling operations. It is important to complete road courses, a large area of farmland on the ground leveling and trenching, slope scraping, earthmoving, removed snow, loose, compaction, fabrics, mixing, loading and land reclamation and other work to help. Is a defense engineering, mine construction, road construction, water conservancy construction and farmland improvement and other important equipment construction.
| Basic specification |
| Engine model | 4BT3.9 |
| Rated power/speed | 75/2400kw/rpm |
| Dimension(LxWxH) | 6880×2375×3150mm |
| Operating weight(Standard) | 7000kg |
| Performance specification |
| Travelling speed ,forward | 5\10\20\39km/h |
| Travelling speed ,reverse | 8\25km/h |
| Tractive force(f=0.75) | 41.6KN |
| Max. gradeability | 20% |
| Tire inflation pressure | 350KPa |
| Working hydraulic pressure | 16MPa |
| Transmission pressure | 1.3~1.8MPa |
| Operating specification |
| Max. steering angle of front wheels | ±50° |
| Max. lean angle of front wheels | 17° |
| Max. oscillation angle of front axle | ±15° |
| Max. oscillation angle of balance box |
|
| Frame articulation angle | ±27° |
| Min. turning radius using articulation | 5.9m |
| Biade |
| Maximum lift above ground | 300mm |
| Maximum depth of cutting | 350mm |
| Maximum blade position angle | 45° |
| Blade cutting angle | 28°_70° |
| Circle reversing rotation | 120° |
| Moldboard width X height | 3048×500mm |
- Q:When the general grader works, it will reverse the flow of oil, and recommend a good machine to avoid this problem.
- Should be the cylinder and scraper motor, there is no set of two-way hydraulic locks, so the oil cylinder or hydraulic motor into the oil cavity and reversing valve into the "middle" when the oil flow back.
- Q:What are the economic and durability years of rollers, pavers, graders and loaders?
- Usually 5 to 8 years... See configuration. Installed second-hand relatively mature... Duration is generally more than 2 years, you can also consider replacing
- Q:What is the reason that the py18o grader does not work?
- Bulldozers pay more attention to earthwork transportation, but most people use it as a leveling device
- Q:What is the reason that the ZF gearbox of Tiangong grader does not go?
- There are many reasons for this. Are there any stalls or are there no individual stalls? To their own investigation, such as the valve pressure is too low, friction slip, oil enough, and so on
- Q:How much is the price of 100 kilowatt or 5 Grader?
- The price is more than 300 thousand, you this question is too general, specific how big to give a price?
- Q:What kind of grader are there?
- According to the wheel for a few days, can be divided into four wheeled and six wheeled two;According to the different driving conditions of the wheel, it can be divided into two types, the rear wheel drive type and the full wheel drive type;A
- Q:What is the difference between making a water stable paver and a peace machine?
- The degree of compaction or smoothness of paver is better than that of grader, but the price is more expensive. Now most of them are paved with paver. The rent is very cheap, and the requirement is higher now. Xi'an Guangwei company Gu Xianggao
- Q:Who knows, where is the front wheel steering hydraulic cylinder for XCMG GR180? Where can I buy it? Thank you
- They are not adjusted, gear pump, steering system and the blade is not the same as the pump, check the oil filter, oil filter, there was no congestion,
- Q:What are the factors that affect the flatness of graders?
- The main causes of uneven slurry content are: water cement ratio is not strictly controlled; concrete mixing time is insufficient; mixing material composition is uneven; and concrete transport process segregation phenomenon. In bridge deck pavement construction, using half construction, concrete by truck and are often transported from the other half, the first concrete pavement after two coagulation disturbance, undermining the integrity of cement concrete bridge deck pavement, it is prone to cracking. 2. quality management and control institutions a perfect quality management and control mechanism is the key to improve the quality of construction. Construction units and supervision units must work closely together, always put quality in the first place, ensure strict control according to the standard in the construction process, and monitor the construction quality at any time.
- Q:31 floor machines hanging stalls, no aisle
- I hope you can describe the questions you want as soon as possible in order to help you answer the questions as soon as possible. Thank you for your help. Thank you.
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
