Min 88% Alumina Sintered Corundum Based Non-Carbon Ladle Refractory Brick
- Ref Price:
-
$2.00 - 20.00
/ pc
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 2000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Min 88% Alumina Sintered Corundum Based Non-Carbon Ladle Refractory Brick
High purity corundum bricks, which is characterized by good mechanical property at high temperature and good chemical stability,
Corundum bricks is widely used in oil gas gasifier, ethylene-generated furnace, and ammonia decomposing furnace in petrochemical industry, carbon black reactor in chemical industry, and high temperature kilns in refractories and ceramics industry.
Corundum bricks has gained the Third Prize of Science & Technology Progress from Sinopec and the former Ministry of Metallurgy Industry.
The brick has been used in the thermal equipment of domestric made or imported. It has been exported and used in German Texaco gasifier with good performance.
Product Applications:
Corundum Mullite Brick are ideal for use in the below applications
Corundum mullite brick is mainly used as superstructure, feeder channel and cover plate in glass furnace. It can also be used as lining of high-temperature kiln and mesothermal carbon black reactor, the shed bar of kiln car, pusher plate of electronic magnetic material industry, etc.
Product Advantages:
CNBM has success in its Corundum Mullite Brick due to their cost-effectiveness and excellent insulating properties. The refractoriness of magnesia chrome bricks are more than 2000°C, and the refractory under load is a above 1550°C.Good steady volume in high temperature, the performance of meeting sudden cold and sudden hot is better than magnesia bricks.
Main Product Features:
1.High refractoriness under load
2.Excellent corrosion resistance to both acid and alkali
3.Good thermal shock stability
4.High density
5.Neutral material
Product Specifications:
FAQ:
Q1: Are you a manufacture or trader?
A1: Factory+trade (mainly for manufacturing, also do some business of related products).
Q2: What's the MOQ of trial order?
A2: No limit,We can offer the best suggestions and solutions according to your requirements.
Q3: After an order is confirmed,when to deliver?
A3: According to your order quantity, normally, 15-25 days after deposit received.
Q4: Is your company accept customization?
A4: We have our own factories and excellent technical team, and we accept OEM service.
Product Picture
Produce Processing
- Q: What is the main component of corundum?
- Corundum is the main component of Al2O3, often containing trace impurities such as Cr, Ti, Fe, V and so on.
- Q: What material is used in an iron smelting furnace?
- In fact, refractory refractory ah is special ceramic frequently used AZS brick, corundum brick, magnesia chrome brick, silicon carbide, silicon nitride bonded silicon carbide, nitrides, silicides, sulfide, boride, carbide and other non oxide refractory materials; calcium oxide, chromium oxide, alumina, Magnesium Oxide, beryllium and other refractory materials.
- Q: What's the jade stove for?
- Is it a furnace made of corundum or a furnace for smelting corundum?Corundum brick stove is commonly used as a refractory material sintering furnace, can be fired refractoriness in refractories, below 1700 degrees such as brick, corundum brick, brick, alumina hollow ball and so on
- Q: Which is good, glazed brick and whole cast glazed brick?
- These two tiles have their respective advantages and disadvantages, in fact, to say which kind of good, mainly depends on the decoration of personal preferences and the location of the shop. If it is only the shop wall, then design and pattern rich whole glazed tile is good, it can make the room impressive, improve decorative effect, make the decoration style to fit the characteristics of his personality. In addition, clean up is relatively easy, not easy to contaminated with oil stains and other pollutants. If you are laying tile, suggested the use of tiles, tiles of good antiskid effect, water absorption rate is relatively low, so the kitchen toilet bathroom and other wet places is not easy to water seepage, improve the convenience of life.
- Q: Expansion ratio of lightweight corundum refractory bricks
- Now with the production of lightweight foam corundum brick, basically still meters with molding casting, moulding after together with die in the drying room drying in 60~70 C 4 days of release, then the appropriate drying, finally after 1300 and 1550 C firing, the total burning time: 50~60h. Light corundum brick after firing is usually not the size and shape of accurate, so that products after the kiln to mechanical or manual cutting, can be made into a density of 0.8 - 1.3g/cm3, 4MPa compressive strength and porosity, the thermal conductivity of 70%~80% 0.17W/ (M - K), light-weight corundum brick use temperature of 1500~1700 DEG C.
- Q: How to improve the induction furnace campaign, from the promotion of refractory life start
- According to the use of atmosphere, choose the appropriate spraying materials, such as infrared radiation paint
- Q: Which is faster for heat transfer between corundum bricks and high alumina bricks?
- For example: 75 high aluminum and 43 clay bricks, 75 single weight 4.5kg or more. 43 3.65kg or so, the use of temperature 75, high aluminum in about 1520, 43 of brick 1430 or so, the color of 75 pan white, 43 of the Loess color. In short, the difference is great.
- Q: What is the standard classification of high alumina bricks and high alumina bricks?
- High alumina brick is a kind of refractory material in refractory brick products. It is made of refractory clay or other refractory material. It belongs to the product of Si Al System
- Q: What are the main constituents of refractory bricks?
- Clay brick and clay brick are mainly composed of mullite (25% ~ 50%), glass phase (25% ~ 60%) and square quartz and quartz (up to 30%). Usually with hard clay as raw material, pre calcined mature material, and then with soft clay, semi dry or plastic molding, the temperature at 1300~1400 C fired clay brick products. Can also be added a small amount of water, glass, cement and other binders to make non burning products and amorphous materials. It is a refractory brick commonly used in blast furnaces, hot blast furnaces, heating furnaces, power boilers, lime kilns, rotary kilns, ceramics and refractory bricks.
- Q: How do corundum bricks bind?
- Each refractory brick is provided with corresponding refractory mud, and corundum bricks are bonded with corundum mud.
Send your message to us
Min 88% Alumina Sintered Corundum Based Non-Carbon Ladle Refractory Brick
- Ref Price:
-
$2.00 - 20.00
/ pc
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 pc
- Supply Capability:
- 2000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
