Kinds of Gate Valves From China Largest Valve ManufacturerBS5153L/W Ductile Iron valve
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 PCS
- Supply Capability:
- 10000 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
cast steel gate valve
API/JIS flanged gate valve
Application
API Gate valve applicant for ANSI Class150~2500\PN20~42\JIS10~20K
Working temperature-29~425 C WCB -40~500 C SS
Material: Carbon steel, Forged steel, SS304 SS316 SS316L, etc.
Specifications: DN15-DN600
Standard: GB, JIS, ANSI,
End Connection: Flanged, Welded, Threaded End
Brand: China Dongjon
Type: Full bore
Medium: Water, Oil, Gas Nitric Acid, etc.
Model: Z41 5 W/ H Y-10K 20K Z61Y W/H 10K 20K
Operation: Hand Wheel, Gear operated, Electric actuator
Specifications 1. The design of products production matches a foreign forerunner standard request, seal completely firm, the performance is good.
2. The structure designs tightly packed reasonable, shape beauty.
3. Adopt wedge type flexible sluice board structure, establish to roll over bearing amid the big caliber, the Qi shuts easily.
4. The valve body material species is well-found, the filling compound, packing sheet slab chooses to go together with according to the actual work condition or the consumer request reasonable, applicably at the various press, temperature and dielectric work condition.
5. The adoption various pipe arrangement law orchid standards and law orchid seal completely surface pattern and satisfy various engineering requirement and consumer's request at home and abroad.
Metallic seated Swing Check valve
2.BS5153L/W
3.Ductile Iron/Cast Iron
4.Size:DN50-400
5.Class:PN10-PN16
The productions we operated are:DIN3352 F4/F5,BS5163,AWWA C509,Socket End,Ball check valve,Swing check valve,Underground Fire Hydrant,Air Valve etc
More information is available upon receipt of your enquiry.
You will get our quick reply!
- Q:What are the common standards for gate valves?
- 1, product standardsGeneral purpose valves, flanged connections, iron gate valves, GB/T 12232-2005General requirements for steel valves GB/T 12224-2005"Steel flat gate valves for pipelines" JB/T 5298-91Inspection and test of valves. JB/T 9092-1999Standard for safety evaluation of drinking water distribution equipment and protective materials GB/T 17219-1998
- Q:Gate valve z41t what does that mean?
- According to the provisions of the JB/T 308-2004 valve type programming method:Z = gate valve4 = connection form: flangeT = sealing surface material: copper alloy
- Q:What does gate z41t-10 150 mean?
- According to JB/T308-2004 "valve type programming method"Z gate valve4 flange connection1 Ming wedge single gateT sealing cover material is copper alloy10 nominal pressure PN10PN16 below no marked valve body code, body material is gray cast iron150 nominal size DN150
- Q:What does gate valve do?
- The gate (gate valve) is a gate opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle.Gate valves for Class150 ~ 2500, the working temperature of -29 to 425 DEG C (Tan Gang) or -29 to 500 DEG C (stainless steel) small caliber pipeline, used to cut off or connect the line of medium, use different materials, can be separately applied to water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea etc. a variety of media, the 3 Classification valve according to the different classification methods can be divided into: the parallel gate valve, wedge gate valve, valve lift, rotating rod valve, quick opening and closing valve, reduced valve, flat gate valve etc.. 4, characteristics of fluid resistance is small, applicable pressure, temperature range, medium flow direction is not restricted, good sealing performance
- Q:Z41T one 10 gate valve and Z44T one, 10 gate valve difference
- Z41T one, 10 is single gate, Z44T one, 10 is double gateAccording to the provisions of the JB/T 308-2004 valve type programming method:Z== gate valve4== connection: flange type1== structure: Rigid single gate4== structure: Rigid double gateT== sealing surface material: copper alloy10== pressure rating: 1.0MPa
- Q:Which is the most expensive, check valve and gate valve?
- In the case of DN50 Z15T-16 DN50: screw valve 46.200 thread copper bar gate valve Z15T-16 DN50 52 Z45F-16 DN50 97 flange valve flange valve rod Z44T-10 DN50 169 Z45T-116 DN50 flange valve dark bar 173 thread swing check valves DN50 52.090 thread straight type check valve DN50 57.280 flange screw check H44T DN50 129 flange valve lift check valve H41T-16 DN50 124
- Q:What else, P54140V, 170V? What do they mean?
- P work pressureP54 temperature at 540 degrees of work pressureThe pressure at P54 100 is 540 at the temperature of 100barV valve for chromium molybdenum vanadium steelP54 pressure 140V temperature at 540 DEG C for 140bar valve for chromium molybdenum vanadium steelP54 pressure 170V temperature at 540 DEG C for 170bar valve for chromium molybdenum vanadium steelFrom the JB/T4018 "valve type model preparation method"The standard unit is MPa, but it is usually used in bar
- Q:What is the difference between a flanged gate valve and a wire gate valve?
- This is very simple, flanged gate valve is the valve with both ends of the flange, the installation of the pipe to weld the reverse flange, bolt with the pipe flange and valve flange connection. Valve is the valve ends with wire wire, a wire and wire points, and pipeline installation, connecting part with joint or head of the screw and the valve directly on the pipe screw connection.
- Q:Notes on flat gate valves
- Use, maintenance, maintenance and precautions1. valve before leaving the factory have made strength and sealing test, the use of all connections should maintain the initial state.2. this series of valve operating handwheel is marked with open and close rotary direction, and the upper part of rod is equipped with open and close height gauge for regulating indication.3. when the valve and pipeline welding, the valve should be opened, appropriate to protect the neck with moisture, minimize heat conduction, to prevent damage to the sealing packing parts.4. when the valve is closed, the lever shall not be used. When the gate is closed to the top, the handwheel shall be turned 1/2 so that the gate is in a floating state.5. in the use of the valve should be regularly to the valve cap injection grease joint into the quantitative grease.6., the valve in use, such as vulnerable parts and leakage, should be replaced in time.7., the valve in the overhaul process, the cavity should be cleaned, the assembly should be added to the transmission parts of grease.8. valve storage during the shutdown, the gate should be in the closed position, long-term storage should be placed in ventilated dry place, regular inspection and maintenance.
- Q:What are the specifications of the gate valves? Does the work pressure need to be marked separately?
- Gate valve code Z, such as GB gate valve Z41H-16. Front is the valve type, and the back 16 represents the pressure of 16 kg, 1.6MPa
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Kinds of Gate Valves From China Largest Valve ManufacturerBS5153L/W Ductile Iron valve
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 PCS
- Supply Capability:
- 10000 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords