Q:Why? God, can you explain to me in detail why?

Pump outlet, check valve, gate valve.Gate valve plays a regulatory role, is the main pipe. Such a sequence can ensure that the water flow during power failure does not cause damage to the gate valve.

Q:What is the difference between Z41X gate valve and Z45X gate valve?

All flange soft sealing gate valve, but 41X is Ming bar, 45X is dark pole

Q:What does gate valve do?

The gate (gate valve) is a gate opening and closing parts, RAM direction of motion perpendicular to the direction of the fluid, valve can only be fully open and fully closed, can not be adjusted and the throttle.Gate valves for Class150 ~ 2500, the working temperature of -29 to 425 DEG C (Tan Gang) or -29 to 500 DEG C (stainless steel) small caliber pipeline, used to cut off or connect the line of medium, use different materials, can be separately applied to water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea etc. a variety of media, the 3 Classification valve according to the different classification methods can be divided into: the parallel gate valve, wedge gate valve, valve lift, rotating rod valve, quick opening and closing valve, reduced valve, flat gate valve etc.. 4, characteristics of fluid resistance is small, applicable pressure, temperature range, medium flow direction is not restricted, good sealing performance

Q:Function of gate valve

Gate valve is a closed (gate) along the central line of the vertical direction of the valve moving. Valve in the pipeline can only be fully open and fully closed off, can not be adjusted and the throttle. Gate valve is a valve used in a wide range, generally more than 50mm caliber DN block device is selected it, sometimes cut off very small aperture devices are used to gate valve, gate valve is used as cut-off media, when in full flow through the whole, when the media is running a minimal pressure loss. Gate valves are normally used in situations where they do not need to be frequently opened and closed, and the gate is fully open or fully closed. Not used as an adjustment or throttling. For high speed moving medium, the gate can cause the vibration of the gate under the condition of partial opening, and the vibration may damage the sealing surface of the gate and the valve seat, while throttling will cause the gate to suffer the erosion of medium.

Q:Installation and operation instructions of knife gate valve

5., when installing the valve, users must reserve the necessary space for valve actuation;The wiring of the 6. driving device shall be carried out according to the wiring diagram;7. knife gate valve must be regularly maintained, shall not be arbitrarily collision and extrusion, so as not to affect the seal.

Q:What is a protective gate valve? What is gate valve knowledge?

it is up to the function of a single valve can not reach the exit of the product is installed in the water supply pipe and the head of civil air defense to conveying medium to stop, wave and wave combination, to prevent internal shock wave into the system engineering facilities, so as to eliminate the destructive shock wave, to protect the system facilities normal operation and safety protection purpose.

Q:Why does the fire hydrant box in the air defense area need to be added with gate valves?

when the envelope from the introduction of civil air defense, air defense should be set in the side of retaining structure; through the protection unit between the closed wall, should be installed in the pipe walls on both sides of the door closed;2 protection valve nominal pressure shall not be less than 1.OMPa;

Q:What is the soft seal gate valve?

Commonly used soft sealing gate valve model is divided into: Z45X and Z41X, the difference is that the Z41X is the Ming bar, and Z45X is dark rod.Matters needing attention in packing and transportation of soft sealing gate valve:Soft sealing gate valve before transport, should use the rope to tie up the small caliber.Before transportation, the lighter sides of the valve should be sealed.For larger caliber soft sealing gate valve, it should be used to carry out simple packing, it can better prevent the valve in the process of transportation damage.

Q:What is the difference between cut-off valve and gate valve?

Simply put, the cut-off valve is one-way, only into, do not give up, the valve is two-way

Q:What is the difference between the cut-off valve and gate valve, the general will use the cut-off valve instead of gate valve

Yes. Globe valves and gate valves are indeed common in certain piping and operating conditions.