Q:What are the types of hose connectors?

In general, we'll sort it out first.It is divided into A/, B/, C/, D/, F/, G/, H/, K/A/ flat sealing type,Type B/ is a jacketed joint that matches the 24 degree C type,C/ points 24.60. and 74 degrees, and in turn with 24 degrees g, type and 74 degree g match,D/ is a spherical sealed typeF/ is a disc type jointG/ divided into 3 kinds, namely 24, 60, and 74 degrees, and the same degree of C matching seal,The H/ machined a sealing groove in the cone of 24 degrees g,K/ a quick change connector, it goes nuts, adopts the sealing method, the piston type to facilitate the replacement of Yucca Shaw, commonly used in coal mine which is commonly used to.

Q:What kind of material is medical rubber tube?

General medical grade silicone tube, environmental protection, no odor, in line with food grade certification FDA/SGS/ROHS/LFGB, widely used in the medical industry. Friends do not understand, you can contact me. New silicon rubber pipe

Q:Aging of natural gas pipeline

Replace gas hose.The gas hose is a special hose connection of gas pipelines and gas appliances, according to the analysis of some gas accident statistics, because the gas hose aging or bitten by rats caused by gas leakage accidents accounted for more than 30% of all gas accidents.

Q:How to remove the smell of gasoline in the car?

The leakage of the gasoline pipe usually occurs at the interface between pipes. Open the engine compartment lid and visually judge that if the interface leaks, after a period of time, the surface will absorb dust and form oil sludge.Measures: check the gasoline pipe regularly, tighten and repair the interface in time, replace the gasket and so on.

Q:What is the function between the rubber pipe joint and the installing pipe?

The action of the rubber pipe joint on the installation of pipes:1. Small size, light weight, good elasticity, easy installation and maintenance.2. After installation, the transverse, axial and angular displacement of the pipe vibration can be absorbed. The pipe is not concentric and the flange is not parallel.3 、 after installation, it can reduce the noise caused by vibration of pipes, pumps and so on, and has strong vibration absorption ability.

Q:How to distinguish the true and false corrosion resistant rubber soft joint?

Soft joint products into your acidic medium, a bubble will know!

Q:Faucet hose connection problem

The buried water pipe is outside the wire, you can use the inner home angle valve. When installing, pay attention to the rubber ring in the metal hose. The gasket should be put away. It is better to buy the transparent rubber ring and the metal hose of that kind of gasket, and pay attention to the length.

Q:The difference between the rubber pipe and PE pipe?

Rubber tube, this product is a rubber tube products, with oil, acid, alkali, heat, pressure and other characteristics of the transmission and attract rubber hose. Most rubber tubes are non-toxic and environmentally friendly, but some of the higher demand oil and gas pipes add flame retardants to the rubber material. The flame retardants contain toxic and harmful substances which can have a slight effect on the human body and the atmosphere. Rubber tube and characteristics; physiological inertia, UV resistance, ozone resistance, resistance to high temperature (-80 to 300), high transparency, strong resilience, resistant to compression permanent deformation, oil resistance, impact resistance, acid and alkali resistance, wear resistance, flame resistance, voltage, conductive properties. Apply to supporting electrical appliances, electronics, furniture, equipment, toys, hardware, medical equipment, sporting goods, audio, lighting, machinery, automobiles, motorcycles, ships, aviation, and other fields.

Q:The use of anti slip rubber joints under what circumstances?

When the pipe produces instantaneous pressure and is greater than the working pressure, it should choose a joint higher than the working pressure and one gear. For example, when the pipe starts at an instantaneous pressure of >1.0MPa, the 1.6MPa shall be used as the joint. When the instantaneous pressure is >1.6MPa, the joint of 2.5MPa shall be used.

Q:Can high speed air flow through a rubber tube and produce static electricity?

To solve this problem, I suggest you do not focus on the voltage level, but focus on how to eliminate static electricity. For example, choose a low resistivity rubber material to ground and control the airflow humidity (if possible).If you really need to accurately grasp the size of the voltage caused by static electricity, and there is no reference to the literature, you may as well begin to study the experiment.