Q:The wardrobe smells so heavy. How can I get rid of it?

Should be able to sew a cloth bag, these will be poured into the cabinet, you can absorb the smell. The smell in the closet, mainly material, is glued together. The gum contains formaldehyde, which is especially bad for the body. Rural air is good, good open doors and windows ventilation, hoping to spread faster, really not, or suggest you throw away.

Q:How do you calculate the price of the cabinet made of MDF?

1. some local material prices are a little different, artificial algorithm is not the same, mostly by area count, about 60 yuan, 120 yuan, the high density board is not expensive, one in 30 - 60 yuan between, a board in about 2.5 or so. In this way, you should figure out the cost price of your own, and do not forget the hardware, but should be less than 50 yuan can be done.2., the general cabinet of the main structure can not be used 0.9, preferably 1.8, 1.5 of the can also, but not long, inside the plywood can be used 0.9, (this will cost less).3. if manufacturers do, usually do not have much of a problem, you can see the plate and the plate direct interface is intact, hardware installation is in place, but I still advise you to do some material, shoe, high density board is a water bubble will rot..

Q:The height of the bedroom closet?

As for the stacked clothes, clothing to the width of the folded, cabinet design when the width of 330mm ~ 400mm, the height of not less than 350mm; the upper end of the whole wardrobe usually set placed quilts not commonly used items, or below the height of 400mm.

Q:Does the steel pipe support cabinet contain formaldehyde?

Yes, there isThe steel pipe is formaldehyde free, and the cloth covers of the wardrobe contain formaldehyde, but if the content exceeds the standard, you can smell it carefully. Can you smell the obvious pungent smell?.Because the fabric in the process of dyeing, in order to make the dye more permeable, will be added formaldehyde in the dye. Now cloth formaldehyde exceeded the situation is also more, my company in the process of indoor air treatment, decorative curtains often formaldehyde exceeded the standard.

Q:Do the wardrobe first or the wooden floor first?

In general, the whole cabinet is made must not shift (size have not adjusted), so it can be confirmed that under the cabinet is not floor (of course, should pay attention to the amount not deducted the cabinet size occupied floor height), and the cabinet installation force from the structure on the floor it is also not good (the reliable degree of deformation cabinet installation and flooring and wooden keel possible).

Q:What is the design size of an open closet?

The storage area is the area where the items are not in common use. The size of the shoes should be kept at 250-300mm, and the height of the quilt should be no less than 400mm. Other travel boxes or backpacks and other items of height, size is more flexible, you can according to the overall design of the wardrobe, beautiful angle to consider, as far as possible with other spatial areas of the size of "flat"".

Q:When doing wardrobe at the door left an appropriate line in centimeters

That depends on whether you are doing the square or arc of the wardrobe, and if it is to do the side to stay 28 centimeters, then if you do arc, as long as 80 centimeters will be fine.

Q:Inside the wardrobe, the compartments are too big. What should I do?

Tip: if you can't remember the last time they were dressed, or their purchase date, put them in one of the boxes. You can also prepare a box for those clothes hung in halls, closets, or basements.

Q:How do you remove moisture from your wardrobe?

Moisture absorption box: common moisture absorbent products on the market, generally made of calcium chloride particles as the main content, and most of them also add flavor components, so it combines dehumidification, aroma, anti mildew, deodorization and other functions in one. The moisture absorption box is mostly used for the moisture absorption of the wardrobe and the shoe cabinet, and is suitable for the sofa and the corner room in the living room, under the bed of the bedroom and the cabinet of the kitchen. When you use it, just put it in the cabinet.

Q:What is the process flow of the wardrobe?

The main production process of the whole wardrobe:The whole wardrobe because of the surface material and the surface decorative effect of the different process are not the same, the main representative categories: veneer whole wardrobe, a whole wardrobe, solid color stickers whole wardrobe, melamine whole wardrobe and mixed categories consisting of the above categories for two or more of the whole wardrobe. These categories of overall wardrobe process flow based process, there are some special, such as bending board, paste thickness, etc.. In the actual operation process, because of cost and other factors, usually you have me, I have you, it is worth mentioning that at present with the wide application of honeycomb core, processing the whole wardrobe will be more complex.