Marquetry Wood Veneers - High Quality Low Carbon Wood 002
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General information of low carbon wood
|
Raw material |
Sawdust, corn-straw and tailing, can be recycled after using. |
|
Technology |
Utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. |
|
Installation |
Stitching, wet-sticking and dry-fasten connecting |
|
Character |
Favorable corrosion resistance, non-ignitable, water-proof, UV-resistant, high resistance to fire, water and insects. |
|
Lead time |
30 days after receiving buyer's original L/C or Prepayment |
|
Package |
Seaworthy Export Standard Wooden Pallet |
|
Four breakthroughs |
Comprehensive utilization of natural resources: Be recyclable, using sawdust, corn-straw and tailing as materials. The product can be recycled after using. |
|
Low carbon and energy saving in the course of production: Adopting the independent individual property’s technology, utilizing molecular structure of crystalline-state solidification, shaping under normal temperature and pressure with low carbon emission. | |
|
Environmental and healthy in the course of construction and using: Synthesized by natural inorganic raw materials, nontoxic, odorless and non-radiative simple installation, which could save energy cost and reduce and waste emission, raise efficiency and reduce erection time. | |
|
From nature, beyond nature: Full realization of the natural texture, high resistance to fire, water and insects. Do not rot or fade after long time usage. Super self-cleaning needs low maintenance cost. Vivid color and appearance provides a wide space to designers. | |
|
Six advantages |
Lower more than 50% cost, enhance building's performance to price ratio. |
|
Cutting at will, Fixing easy, Shorting project time. | |
|
Good performance in resistance to elements, corrosion-resistant ,resistance to termite, fire resistance and water-resistant, far from distortion and discolorations in 30 years. | |
|
Well self-cleaning, low cost in later maintenance: Don't need professional maintenance in 30s(Cleaning with water only), saving much cost. | |
|
Customize the color, showing individuation: Beyond 400 kinds of colors, designers could exhibit their imagination. | |
|
Compound with natural inorganic materials: Without formaldehyde and toluol, sustained releasing negative oxygen ion, forming nature oxygen bar. | |
|
Special specifications are available on customers' requirements. | |
Specification of low carbon wood
Standard: 3000mm(L)×1200mm(W)×15mm(T)
Standard length: 3000mm
Standard width: 120mm,150mm,200mm,300mm(including 3mm kerf width)
Standard thickness: 15mm
Technical information of low carbon wood
|
Density |
1.26g/m3 |
Folding strength |
10Mpa |
|
Dry-shrinkage rate |
0.05% |
Elastic modulus |
7211Mpa |
|
Wet expansion rate |
0.17% |
Shear strength |
3.5Mpa |
|
Screw holding capability |
121N/mm |
Coefficient of heat conductivity |
0.69(W(m·k)) |
|
Frost resistance |
Thaw-freeze cycle after 30 times, no slip crack and peeling off | ||
|
Unpermeability |
No drop appearing on the bottom after 24 hours. | ||
|
Impact strength |
3.3KJ/m2 | ||
Products exhibition of low carbon wood
Low carbon wood sheets with thin grain
Low carbon wood sheets with thick grain
The project picture of low carbon wood
- Q: The Veneer dyeing quality requirements
- The next step to deal with, and then after a good modulation of the pigment (dye) soaked, the basic veneer has a color, and then fixed color, drying, hot pressing, cutting, packaging.
- Q: Slicing of thin slices of wood
- the insulation in the range of 40 ~ 50 ℃ (with the species and thin wood thickness may be)
- Q: The following table lists the cooking criteria for several types of wood,
- intermittent operation of the drying room. Drying room is old-fashioned drying equipment, very economical, but dry quality is better.
- Q: Technology veneer and natural veneer distinction
- But it has a natural veneer than the advantages. That is not blistering. I think you should understand that. And its pattern of pattern.
- Q: Part of the production process
- This is the actual production is usually used saturated steam or hot water on the wood side of the cooking treatment of a water heat treatment reasons.
- Q: The principle of veneer dyeing
- in the preservation of natural veneer original natural texture and texture at the same time, the veneer dyeing, so rich Color and wood texture with a different decorative effect
- Q: Often, the processing of natural vines is done by slicing the method.
- Different diameter logs should use different sawing programs. The thick lines in the figure are the saw lines, and the direction of the arrows is the planing direction of the planer
- Q: What is veneer, please explain in detail
- after half a century of development, already have a considerable scale.
- Q: Veneer has a very affordable, versatile features
- Veneer used in all kinds of high-grade wood decorative leather furniture on the surface, not only the price is reasonable and the function is also particularly good
- Q: What are the specifications for veneer?
- The price from a more than one square to several hundred and one square have, the general import of expensive than domestic
Send your message to us
Marquetry Wood Veneers - High Quality Low Carbon Wood 002
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- 1000 sq.m, m²
- Supply Capability:
- 400000 sq.m. Per Month m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
