Q:You can connect inside the pump and valve

Pump and valve should be installed between the distance, too close, too far, will cause damage to the ball valve. The flange is usually used on the pump. Valve can be connected with a pipe with screw pipe, a head welding flange, and the flange is directly connected with the water pump. Super - Electronic Commerce

Q:Is the integral type split ball valve structurally identical?

The utility model is characterized in that the desktop is connected between the valve body and the valve sleeve, the gasket can effectively prevent leakage of the valve, the flow direction of medium after transformation can be used in two-way, which greatly facilitate the industrial pipeline installation.

Q:For the master enlighten Q47 ball seat spring hole number is determined by how

Force = spring stiffness (kg/mm) * compression volume (mm)Number of work cycles of spring stiffness = line diameter *1000/C 3 timesC= spring middle diameter / line diameterSpring diameter = spring outside diameter line diameterCalculate each spring force, multiplied by the number. According to the manual valve design must be greater than the pressure, pressure ratio must be large than the material allowable pressure on the line. (emphasize that here because the production process of the spring, has value of many uncertain factors, so the actual production of the spring and you cannot calculate out the same, so please choose when to consider).

Q:What type of ball valve is Q17F-10T?

I don't know. Oh, I haven't seen it yet

Q:What does "DN PN" mean? DN25 PN18 stands for what is the thickness? With the usual said 4 in charge of what's the relationship?

PN nominal pressure.Definition：Relating to the mechanical and dimensional characteristics of the components of the piping system and the identification of letters and combinations of numbers for reference. It consists of letters PN and followed by dimensionless numbers.Note 1: numbers followed by letters "PN" do not represent measurements and are not used for purposes of calculation unless otherwise specified in the relevant standards.Note 2: is not associated with the relevant pipe component standards, but the term "PN" does not make sense.Note the 3: piping element allows the pressure to depend on the PN value of the element, the material and design, and allows the operating temperature, etc., to allow the pressure to be given in the corresponding standard pressure temperature class table.Note 4: all pipe elements with the same PN and DN values shall have the same mating dimensions as their flanges.The latest definition of PN comes from standard GB/T 1048-2005, the definition and selection of pipe component PN (nominal pressure), and is referenced in the standard of pipe fittings and tubing. GB/T 1048-2005 7268:1996 Pipe components - modified ISO/CD Definition of nominal pressure, a "note increase than the original standard: allow numerical" choose other PN when necessary, namely in the PN series, you can use other numerical PN.

Q:Three electric ball valve type T and type L what is the difference?

Electric three way ball valve is a kind of valve, can be divided into L and T type.The T type can cause three orthogonal pipes to connect with each other and cut off third channels, thus diverting and merging the channels.Two pipeline L three ball type valve can only be connected mutually orthogonal, communicating with each other while maintaining the third pipeline, only as a distribution function.Type T and L type reversing diagrams are as follows:Turn left and turn right |

Q:I design water meter transformation, 50WPD table, the original table before the installation of 50 anti-theft valve, table after the installation of 50 of the globe valve; master let me put anti-theft valve into anti-theft gate valve. Switch the stop valve to the gate valve. I'd like to ask what kind of valve is appropriate Why? And I checked from the Internet that the ball valve is generally used for small aperture, this aperture range is how much? Why?No copy paste, thank you......

Ball valve through the circular channel and smooth, compact ball valve, so the fluid through its resistance is very small (strong circulation). Quick and quick opening and closing, easy installation and more connection. Wide range of use. Its shortcomings, high cost.

Q:What does copper ball valve type Q11F-16T mean?

Q refers to the ball valve, 1 refers to the connection mode, the latter 1 refers to the straight through type, F refers to the sealing material, 16 refers to the nominal pressure of 10 times, T refers to the main material for copper material.

Q:What's a twin hot melt ball valve?

Is a plastic ball valve, connecting France is hot melt.

Q:DN15 stainless steel ball valve 304 can withstand much pressure?

There is no pressure rating PN (nominal pressure) in the description, so it is not sure how much pressure it can bear.PN, nominal pressure (Nominal, Pressure) is a means of pressure, mainly used in piping and pipe fittings, valves and other shell device pressure expressed;Nominal pressure PN is a digital indication of pressure related signs, which is a convenient round integer for reference.