Belden Ppr Pipes

Hot Products

DIN Ductile Iron Flange Ball Check Valve

Ductile Iron Shouldered Butterfly Valves

Ductile Iron Class 125 Wafer Type Check Valve

Ductile Iron Body and Disc Double Flange Butterfly Valve

Non-Rising Stem Resilient Soft Seated Gate Valve

Forged Brass Ball Valve ; Ball Valve ; Brass Ball Valve

trunnion ball valve ; ball valve ; CLASS150--2500 ball valve

Ball Valve fully welded body with top entry design

Pn16 Ductile Iron Casting Ball Valve

Disc Wafer Check Valve

FAQ

Which is more cost-effective electric ball valve?

Be sure to pick a company that is strong and a quality assurance company!Zhejiang Xinou Automation Instrument Co., Ltd is a professional manufacturer of all kinds of industrial control valves and related automatic control equipment, has been committed to the industrial process control valves and related equipment R & D and production, professional manufacture of electric, pneumatic industrial control valve and the 38 series of more than and 400 specifications of products.

The difference between ball valve q41f46-16c and q41f46-16

C stands for carbon steelThe latter doesn't indicate material

What does copper ball valve mean by "1/2"?

This indicates that the caliber of copper ball valve is DN15

What does one inch of an ice ball refer to?

An inch refers to the valve's medium channel is%%C25mm

And the cut-off valve is not the general name of gate valve and butterfly valve?What are the signs of differentiation?How about the use?

When the valve is opened, the opening height of the valve is 25% to 30% of the nominal diameter, the flow has reached the maximum, which means that the valve has reached full open position, so the opening position of the stop valve should be determined by the stroke of the discThe cut-off valve has the following advantages:The utility model has the advantages of simple structure and convenient manufacture and maintenanceSmall travel time, short opening and closing timeGood sealing, friction between the sealing surface of small, long lifeThe disadvantages of the cut-off valve are as follows:The resistance of fluid is large, and the force required for opening and closing is largerNot suitable for medium with particle, viscosity and easy cokingPoor regulation performanceType valve stem according to the position of divided threaded screw type, internal thread. Divided by the flow of media, there are straight through, DC type and angle type. Divided by the form of valve seal, a packing seal bellows seal valves and valve.The installation and maintenance of the cut-off valve shall pay attention to the following matters:The stop valve operated by the handwheel and handle can be installed in any position of the pipeHand wheel, handle and steering mechanism are not allowed to be used for liftingThe flow direction of the medium shall be in accordance with the arrow shown in the valve body

What does "all pass" ball valve mean?

The ball valve is divided into full bore ball valve, ball valve and three or four valve diameter contraction, full bore ball valve inside and outside of the size of the aperture is consistent, overall were flat, parallel and pipeline fluid, and necking is outside the hole is larger than the hole, the medium flow through the three or four inconsistent.

The two valves are available for the flow of the electromagnetic valve switch, I contact more, found for water solenoid valve are caged water, to repair several times because of impurities or newly installed pipeline with raw materials flowing through the valve, close the valve body when not to rely on Yan, a seepage water tank to diffuse phenomenon!I am looking for a replacement, I think the electric valve should be a good choice, not used to a conclusion.Please use the electric ball valve to talk about friends, or for the two kinds of friends who have an understanding to talk aboutOr there is no better substituteThere seems to control the solenoid valve and electric valve is not the same, the solenoid valve is normally open and closed to control the electric valve is controlled by the trigger (like), if used to replace it, what is the controller?

I think you should use the solenoid valve is diaphragm type, and not particularly good products, diaphragm solenoid valve in the closed position when the diaphragm is easy to change, resulting in pipe die, or medium impurities caused the pilot hole is blocked, the valve will not move, so the diaphragm solenoid valve. Is there a film guide card member, so that each position of the diaphragm in the correct position, but the pilot hole is not a solution, of course, you can use direct action solenoid valve, such problems are solved. The electric ball valve than the pilot solenoid valve in this respect, but the cost of this fear is much higher, especially the pipe diameter is not so, it does not pay!

What does copper ball valve type Q11F-16T mean?

Q refers to the ball valve, 1 refers to the connection mode, the latter 1 refers to the straight through type, F refers to the sealing material, 16 refers to the nominal pressure of 10 times, T refers to the main material for copper material.