High Alumina Fireclay Brick Price for Fireclay Brick Refractory Brick
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Refractory Brike Insulating Fire Brick for Heating Furnace
Description:
The products have passed the ISO international certified, are made of high pure material, fired at high temperature by advanced technology, with the advantages of high strength, high compression resistance, good thermal shock resistance, good performance in high temperature, good thermal conductivity, good erosion resistance and so on. Widely be used for linings of furnace in industries.
Item | Type 1500 | Type 1550 | Type 1600 |
Max, service temperature | 1500 | 1550 | 1600 |
Al2O3 % | ≥70 | ≥80 | ≥85 |
SiO2 % | ≤28 | ≤18 | ≤13 |
Fe2O3 % | ≤0.5 | ≤0.5 | ≤0.3 |
Bulk density(g/cm3) | 1.3-1.5 | 1.4-1.7 | 1.6-1.8 |
Reheating linear change % (1600°C *3h) | ±0.5 | ±0.5 | ±0.3 |
CCS(Mpa) | ≥8 | ≥8 | ≥10 |
Refractoriness under load °C (0.1Mpa,0.6%) | ≥1500 | ≥1550 | ≥1600 |
Thermal Conductivity w/(m.k) Average 800 °C | ≤0.6 | ≤0.7 | ≤0.5 |
Application | Primarily used for lining of the shuttle kiln for calcining refractory material, industrial ceramics and domestic ceramics, and the bricks for the high temperature zone of tunnel kiln, and insulation brick for high-temperature furnace. | ||
Remark | The standards for highest used temperature are oxidizing atmosphere and intermittent furnace. | ||
Feature:
1.High compression strength.
2.Top high-temperature capability.
3.Excellent thermal stability.
4.Low thermal conductivity.
5.Powerful penetrating-proof capability.
6.Good erosion-resistance.
7.Long service life.
Application:
Refracory brick plant can be in direct contact with the flame,this insulating brick can be used as linings or as thermal preservation layers in various industrial furnaces and kilns in metallurgical industry, ceramic industry, chemical industry, machinery industry.
such as blast furnace, hot blast stoves ,electric arc furnace, cement kiln,melting furnace, ignition furnace, flue, refining equipment, heating equipment and piping, regeneration device, gas furnace, soaking furnace, annealing furnace, heat reaction chamber and other thermal industrial equipment.
FAQ
1. Do you provide samples?
Yes, samples are free. Guarantee samples quality same as mass production quality.
2. What's the MOQ of trial order?
No limit,We can offer the best suggestions and solutions according to your condition.
3. Can we visit your company?
Of course,welcome at any time,seeing is believing.
4. Do you accept OEM?
Yes, we can do OEM.
5. What are the payment terms?
Usually T/T, D/A, D/P, L/C, Western Union ,others could be discussed .
6. How long is delivery time?
The delivery time will be determined according to the quantity of the order.
7. How are your products’ quality?
More than 20 years of production experience. The products will be strictly inspected before shipment, so the quality could be guaranteed.
8. How to slove the quality problems?
If the products are not confirmed to customer samples or have quality problems,our compay will be responsible to make compensation for it.
9. What is the service life of your bricks?
The service life of different bricks is unlike.It also depends on your using condition and method.
10. How about your company's certification?
ISO9001 and Test Report,also we could apply other necessary certification.
11. How about your price?
Quality will be guaranteed. Competitive prices based on same quality.
Our services:
1.Adhering to the business philosophy "Mutual Trust, Mutual Benefit, Mutual Profit, Faith Oriented".
2.According to your requirements to produce your order and OEM/ODM service is available.
3.Products are inspected through SGS and BV etc and accord with the international standard.
4.Your inquiry related to our products or prices will be replied in a timely manner.
- Q: What is fireproof concrete?
- According to the different properties of fire resisting and heat resisting concrete, they can be divided into silicate, aluminate, phosphate, sulfate, chloride, sol and organic substance, fireproof and heat-resisting concrete, etc.. The following are mainly used silicate, aluminate, phosphate, sulfate fire, heat-resistant concrete.
- Q: What is the heat preservation material used in a laboratory furnace?
- Thermal insulation cotton is a high-purity clay clinker, alumina powder, silica powder, chromium sand and other raw materials in the industrial furnace melting at high temperature, forming fluid. Then, compressed air is used to blow or use the wire throwing machine to turn the yarn into a fiber shape. After the cotton collector is collected, the cotton is formed into a heat preservation cotton.The high alumina brick is usually made of high alumina clinker with small amount of clay. After grinding, the high alumina brick is poured and shaped in the form of slurry by the way of gas generation or foam, and it is burnt at 1300~1500 DEG C. Sometimes industrial alumina can be used instead of some bauxite clinker. Used for lining and insulation of masonry kilns, as well as for areas where there is no strong, high temperature molten material erosion and erosion. When contacting the flame directly, the surface contact temperature shall not be higher than 1350 degrees centigrade.
- Q: What are the requirements for Rubble backfill height?
- Backfill should be filled with large stones, big face, small face upward, the decoration is stable, and then use small stones leveling, the gap between the stones can be swept into the slag, gravel, so that the gap filled.
- Q: What is the difference between T3 refractory bricks and high alumina refractory bricks?
- High aluminum refractory brick brick is all in one type of material classification, the material is AL2O3 high bauxite content above 55%, refractory brick by material into clay bricks, high aluminum brick brick brick corundum brick
- Q: Aluminum content 38, silicon content 55 What refractory bricks?
- Semisilica brick: the content of Al2O3 is 15% ~ 30% of aluminium silicate refractory products. Manufacturing products are semi silica quartz containing impurities or native clay kaolin, refractory clay or kaolin beneficiation tailings and the pyrophyllite
- Q: Difference between low creep high alumina brick and ordinary high alumina brick
- The emphasis is on the physical and chemical indexes of low creep and high alumina bricks. The physical and chemical indexes of the high alumina bricks are different, too. They are DRL-1550And LZ-75 perform GB GB/T2988-2012
- Q: What are the characteristics of high alumina bricks?
- High thermal stability, fire resistance above 1770. Slag resistance is good, used for masonry steel smelting furnace, glass furnace, cement rotary furnace lining. High R.U.L, low creep high alumina brick with high grade bauxite, fused corundum, fused mullite as main raw material of high-grade refractory materials.
- Q: Which thermal shock stability of clay brick and high alumina brick is good?
- Generally, the thermal shock resistance of high alumina brick products is worse than that of clay brick products
- Q: The difference between clay bricks and clay bricks
- According to the hole rate: solid brick (no hole or hole rate less than 25% bricks), porous brick (hole rate is equal to or greater than 25%), the size of the hole is small and the number of bricks, usually used in load-bearing parts, higher strength level. Hollow brick (hole rate equal to or greater than 40%, large pore size and small amount of brick, commonly used in non load parts, low strength grade).Solid bricks and porous bricks are mostly used for load-bearing structural walls. Hollow bricks are mostly used in non load bearing structures.
- Q: What are the categories of bricks?
- In a proper ratio of lime sand brick and quartz sand, sand or fine sand, the ground, Kazumi Wa, semi dry pressing and autoclaved curing and. The fly ash brick is made of fly ash as main raw material and mixed with cement material such as coal gangue, stone powder or clay. It is made up of batching, molding, drying and roasting. It can make full use of industrial waste residue and save fuel.
Send your message to us
High Alumina Fireclay Brick Price for Fireclay Brick Refractory Brick
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
