Gost Standard LED Recessed Ceiling Light Fixtures
- Ref Price:
-
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- -
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
standard led recessed ceiling light fixtures
Specification
| Model No. | 8201100 |
| Iterm name | 3W led down light |
| Color | white/Warm White |
| work voltage/V | 90-265V |
| Power consumption | 3W |
| Dimension/mm | Φ75*25mm |
| Hole cutting size | Φ72mm |
| LED Quantities | 15pcs |
| Color temperature | 2700K~6000k |
| Luminous Flux | 156LM |
| life-span | 35,000hrs |
| Beam Angle | 120° |
| Waterproof | Indoor usage |
| Package | 100pcs/carton |
IP rating | IP33 |
Mask | flick-proof |
Power adapter | good quality power adapter |
Product features:
1. Using high lumen COB light source high intensity aluminum shell ,heat faster.
2.Using good reflectivity light leading board ,it is thinner and brighter ,the lights is more equally.
3.Low voltage and constant current driver ,no glare,the light is soft.
4.Launch in 0.01sec,no flashing,no noise ,no radiation. Energy saving,belongs to grand environmental light.
5.This product can show high brightness, without seeing the lamp itself.
Suitable for: household ,exhibition hall,hotel,shops ,jewelry store,museums,stores and receational space,etc.
Product details:
1. The input line of the lamp plus fixed clamp,is not easy to fall off.
2. Specific stainless steel spring ,no rust ,not easy to deformation.high elasticity,high safety.
3. Flat stainless steel screw,parallel with the back of the lamp.
OTHER.
Payment Terms:A/D,D/P, T/T , L/T, Western Union,paypal
Delivery Time:20-45 days after confirming payment
Warranty: 2 years
Shipping method:As your requests,By Express(DHL,UPS,TNT,Fedex),By Air,By sea are optional
NOTE
the applied ambient temperature must be lower than 40.
not suitable for poorly ventilated lighting fixtures.
not suitable for outdoor .
Caution:
1. Confirm the goods have no damaged during the transportation before using .
2. Packing materials should be stayed away from children,prevent children from playing the plastic bag and small accessores lead to suffocate or swallowed.
3. Put away from the children,do not let the children touch the lamp when it is working.
4. Don't cover any things on the products .Put away from the fire or high temperature object .
5. Laypeople can not tear doen or maintain the product .We have the authority to refuse giving any warranty to the products which are repaired without our instruction.
6. Please shut off the power before clean the lamps.Only use the dry dish cloth to clean .Don't use any chemical or corrosive material to clean the lamps.
- Q:What is the difference between patch LED beads and LED beads: General
- A LED chip is led lamp. Common LED has two or four pins, and there is no needle foot, close to the circuit board, copper foil welding, are the same. You should choose the lamp the key is to consider the color temperature, color rendering index, light efficiency, light, and power quality, buy these things to buy better quality, common is topclass photoelectric
- Q:The quality of the LED patch module
- Luminous efficiency。 The LM value per watt is called luminous efficiency. This is an important criterion for judging whether LED is energy-saving or not. The incandescent lamp is about 14.4LM/W, the fluorescent lamp is about 51LM/W, the neon lamp is 43LM/W or so, and the LED is up to 150LM/W at present, but most of the LED light effects in our country are in 60~100LM/W. It should be noted that only the white light can achieve such high luminous efficiency in LED, and that red, yellow and blue are generally relatively low (mainly related to human visual definition). But compared with neon light, there is no heavy metal pollution, easy to maintain.
- Q:What is the difference in performance between the LED plug-in and the LED patch?
- The cooling of the plug-in is not good, because the plug-in's lamp foot, in order to save costs, generally use iron plus coating, heat conduction is not very good.The strength of aluminium alloy is not enough, it is easy to break, and copper is expensive.Relatively speaking, the patch is good, because the heat is welded on the PCB, copper or direct aluminum substrate cooling, patches near.Otherwise, why do high-power patch it?!SMT direct placement machine, a high degree of automation, low rate of bad.
- Q:SMD LED lamp working voltage?
- Single chip of 1 watts, more than a lot, different colors, the voltage will be different. White is usually 3.0-3.6V.* in addition to their working voltage, working current is more important parameters, once the flow, it will burn out.The LED lamp. With chips is variety, many tricks, they can be connected in series and parallel. The voltage is divided into high voltage, low voltage and medium voltage
- Q:How to detect LED SMD beads
- Resistance voltage ordinary pointer table 1.5V in general, and some only in the high resistance file (*10K file) with 9V or 15V battery, so the pointer table to measure LeD beads to hit the highest resistance profile measurement, otherwise useless, of course, at this time the brightness is very small, can not see, can only to judge the positive and negative resistance values see.
- Q:0603，0805，1206，3020，3528，5050，355 what is the current and voltage of these patch LED? Please give advice!
- LED patch: 0603, 0805, 1206, 1210, 5050. The 0603: conversion to metric is 1005, that of the LED element length is 1.0mm, width is 0.5mm. The trade is abbreviated as 1005, and the English name is 0603. The 0805: conversion to metric is 2125, that of the LED element length is 2.0mm, width is referred to as the 2125 inch 1.25mm. industry, it is 0805. The 1206: conversion to metric is 3216, that of the LED element length is 3.2mm, width is 1.6mm. The trade is abbreviated as 3216, and the English name is 1206. The 1210: conversion to metric is 3528, that of the LED element length is 3.5mm, width is 2.8mm. The trade is abbreviated as 3528, and the English name is 1210. The 5050: This is a metric called, said that the LED element length is 5.0mm, width is 5.0mm. Industry abbreviation 5050
- Q:LED light SMD LED package in what form, trouble you under the guidance of...
- The LED chip has bumps and is welded to the PCB board using FLIP CHIP to packaging technology.LED is English light emitting diode (light emitting diode) abbreviation, its basic structure is a electroluminescent semiconductor chip light emitting materials, with silver glue or glue curing to the bracket, connecting a chip and a circuit board and then with silver or gold, then sealed with epoxy resin around, to protect the internal core role finally, the installation shell, so the seismic performance of LED lamp is good. Field of application involves mobile phones, desk lamps, household appliances and other daily household electrical appliances and machinery production.
- Q:Does anyone know what the current rating of a white high brightness LED patch is? Where can I find out?
- Generally small power LED rated current is basically 20mA
- Q:LED patches have several ways of welding. Which ones can be reflow? What can be done by eutectic welding? Is the welding of viscose and lens material is required?
- L electrode for eutectic solder reflow, the other can be used, regardless of the kind of welding, the temperature is not lower than 100 degrees, the flammable soluble materials have strict requirements, depending on whether the welding temperature is lower than the melting point of what you said or. Otherwise, there will be deformation or damage to the material in the reflow process.
- Q:What does patch LED light mean?
- The patch may be said, adding that the patch board PCB light source, light source lamp light source generally refers to, patch may refer to the combination of PCB plate and two lens beads.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Gost Standard LED Recessed Ceiling Light Fixtures
- Ref Price:
-
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- -
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
