Glass Wool Insulation for Building Roofing and Wall
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 600 roll
- Supply Capability:
- 10000000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Glass Wool are widely used in public, commercial and residential buildings as well as industrial plants, for applications such as roofing, external wall, partition wall and floating floor to provide fire protection, thermal insulation, acoustic control and condensation control.
Item | Unit | Index |
Density | Kg/m3 | 10 - 48 |
Thickness | mm | 25-150 |
Width | mm | 1200 |
Length | mm | 5000-30000 |
● FEATURES
● Thermal Insulation ● Fire Safety ● Acoustic Control
● No Corrosion ● Environmental friendly ● Moisture Resistance
● Energy Conservation & Emissions Reduction
Standard Size
Blanket
Size: W*L (mm) 1200X10000 ( 10000- 30000)
Thickness (mm) 25, 30, 50, 60, 80,100
Technical Data
Item | Unit | Index |
Average Fiber Diameter | μm | About 7 |
Water Content | % | ≤1 |
Grade of Combustibility | Non-Combustible Grade A | |
Thermal Conductivity ( 25℃) | W/mK | 0.038- 0.045 |
Reshrinking Temp | ℃ | ≥300 |
Hydrophobic | % | ≥98 |
Moisture Rate | % | ≤5 |
Noise Resistant Coefficient (NRC) | About 0.75 | |
Slag Inclusion Content | % | ≤0.3 |
Material:
Double layers of aluminum foil reinforced with high tensile spring steel wire
Structure: High elastic wire, aluminum foil. A reinforcement model can be required.
Aluminum foil thickness: 0.035mm
- Q: What is semi-rigid glass wool board
- Commonly used in roofing, the density of about 120-150kg / m?.
- Q: Does rock wool refer to the glass wool?
- Rock wool is not glass wool, ~ ~ ~ two kinds of products, appearance, price, performance are different, have obvious difference.
- Q: If the glass wool is used for thermal insulation outside seamless steel tube, should the pipe be rust-proof and sprayed paint?
- Rust-proof treatment must be done. Without special requirements, you can use epoxy rustproof paint for basic protection. For high demands, you should use zinc anti-corrosion paint.
- Q: Can Kunnai glass wool board and sound absorption blankets be used to maintain sound insulation in hotel floor? Can it decrease half of the noise? How to install?
- No, if the amendment of the surface is not good, it will affect the paving of floor and tile. You can select one of these, and you'better use sound insulation felt for it also is waterproof.
- Q: How to convert thickness if the heat insulation effects of glass wool board and rubber and plastic board is the same?
- Calculated in accordance with the respective heat insulation layers
- Q: Glass wool can be used at zero degrees
- Intermediate fiber starch adhesive products, -35 ~ 300 ℃. Intermediate fiber phenolic resin products, -35 ~ 350 ℃. Glass wool asphalt bonding products, -20 ~ 250 ℃.
- Q: What are the differences between glass wool and rock wool in terms of thermal insulation?
- If the temperature is higher than 300 degrees, the rock wool boards are better. The operation life of glass wool at high temperature is short, and the price of which is higher than that of rock wool. Galvanized board can be used as protective layer for its long operation life but it rusts easily and is not so beautiful. The aluminium plate has a short operation life and it damages and deforms easily.
- Q: What are the functions of the thermal insulation glass wool board?
- Glass wool that is produced by advanced centrifugal blowing method is of soft texture, thin fiber, good elasticity and fireproof property(reinforced aluminum foil can be used as veneer), providing an ideal thermal insulation and sound absorption material for the construction of steel structure.The product is of good acoustic insulation effect, low cost, short construction period and elegant appearance. Besides, it is non-toxic, not irritating to the skin and can ensure the safety of construction workers.
- Q: How to construct when apply rock wool board to glass curtain wall?
- Basic interface treatment: The wall should be cleaned off grease and floating ash, etc. The loose and weathering part should be removed. If the protrusions on the surface of the wall is greater than 10mm, it should be removed. In order to make the adhesion of the base interface unified and homogeneous, the wall needs interface processing. An injection gun or brush can be used to evenly coat mortar to ensure that all the walls have been treated. Before interface processing, bricks and aerated concrete walls needs watering to wet it. When blocking scaffold eyes and abandoned holes, first clean the debris, dust, etc. and then wet it, and then use cement and mortar at a proportion of 1: 3 to fill the holes tightly. 2, Suspend vertical line and the controlling line: The method of laying lines should be determined according to the height of the building. Using the theodolite to look for the verticality making use of corners of doors and both sides of windows. Stretch low carbon steel wire to find the rules, and the horizonal line can be controled crossly based on the 500mm lines as the datum line which is higher than the building. According to vertical flux lines and insulation thickness, flip the control line on both sides of the angles of each horizonal spacing between purlins, and then draw the horizonal flux line as the mark. 3, Installation of rock wool boards: (Box bonding method and achorage of expanded anchor bolts)
- Q: What is the difference between glass wool and rock wool insulation board insulation board ?
- how much is the glass wool insulation board ? From the performance, What are the advantages of glass wool insulation board compared with rock wool insulation board?
Send your message to us
Glass Wool Insulation for Building Roofing and Wall
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 600 roll
- Supply Capability:
- 10000000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
