Specifications of Galvanized Flat Bar

1. Invoicing on theoretical weight or actual weight as customer request

2. Length: 6m, 12m as following table

3. Sizes:

Galvanized Flat Bar Zinc Thickness:15-80μ

Grade: A36, SS400, Q235, Q195

Standard: ASTM, JIS, GB

Thickness:1.5mm-20mm

Width: 10mm-250mm

5. Material Specifications:

 Q235 is similar to ASTMA36,JIS SS400

Usage & Applications of Galvanized Flat Bar

Widely used for construction,Fabrication , Ship building, Machinery manufacturing, Steel structure

Packaging & Delivery of Galvanized Flat Bar

1. Packing: it is nude packed in bundles by steel wire rod

2. Bundle weight: not more than 3.5MT for bulk vessel; less than 3 MT for container load

3. Marks:

Color marking: There will be color marking on both end of the bundle for the cargo delivered by bulk vessel. That makes it easily to distinguish at the destination port.

Tag mark: there will be tag mark tied up on the bundles. The information usually including supplier logo and name, product name, made inChina, shipping marks and other information request by the customer.

If loading by container the marking is not needed, but we will prepare it as customer request.

4. Transportation: the goods are delivered by truck from mill to loading port, the maximum quantity can be loaded is around 40MTs by each truck. If the order quantity cannot reach the full truck loaded, the transportation cost per ton will be little higher than full load.

5. Delivered by container or bulk vessel

Production flow of Galvanized Flat Bar

The process of hot-dip galvanizing results in a metallurgical bond between zinc and steel with a series of distinct iron-zinc alloys. The resulting coated steel can be used in much the same way as uncoated.

A typical hot-dip galvanizing line operates as follows:

• Steel is cleaned using a caustic solution. This removes oil/grease, dirt, and paint.

• The caustic cleaning solution is rinsed off.

• The steel is pickled in an acidic solution to remove mill scale.

• The pickling solution is rinsed off.

• A flux, often zinc ammonium chloride is applied to the steel to inhibit oxidation of the cleaned surface upon exposure to air. The flux is allowed to dry on the steel and aids in the process of the liquid zinc wetting and adhering to the steel.

• The steel is dipped into the molten zinc bath and held there until the temperature of the steel equilibrates with that of the bath.

• The steel is cooled in a quench tank to reduce its temperature and inhibit undesirable reactions of the newly formed coating with the atmosphere.