Full Polished Glazed Porcelain Tile 600 XD6A530
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1152 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Basic Information:
Tile Type | Full Polished Glazed Porcelain Tile |
Certificate | ISO13006, ISO9001 |
Finish | Nano Finish |
Size | 600x600mm |
Water Absorption Rate | Below 0.5% |
Packing | Carton + Wooden Pallets |
Usage | Floor and wall |
Other Choices | many designs, size, colors |
Delivery Time | 15~20 days after 30% deposit received |
Features:
l Available in many designs, specifications and assorted color, unique designs and exclusive quality
l Used for indoor & outdoor wall and floor decorations, as well as Stair Case Product;
l Easy to install, anti-dust, washable, acid-proof, alkali-proof, durable
l Material: glazed porcelain
l Customized sizes available according to clients’ requirements
l The full polished glazed porcelain tile is widely used for interior house flooring, hotel lobby flooring, shopping mall as well as other public sites.
l Vivid stone texture and vein bring our decoration the natural stone beauty with much lower cost, easier quality control and easier decoration proceeding.
l Advanced glazing technology to make sure the tile surface beauty vivid and clean, via ink-jetting or silk printing.
l We could go with OEM model, making 2nd production based on client’s requirement;
l We could offer flexible service on shipment and better support on payment term;
l Our quality guarantee is based on the strict production procedure, quality controlling on the shade, straightness as well as white degree.
- Q: would like my cory tile to shine without being slippery. What products work best without streaking like crazy ??
- Quarry tile is not meant to shine . It s quality as a tile is its slip resistance. This is why its spect out in the use in restaurants and bar areas where water is present a lot. There are cleaners that you use to keep it clean but adding a product to make it shine will take away its main anti slip properties and make is slippery when wet.. Any other questions you can e amil me through my avatar and check my qualifications there.. GL
- Q: I want to replace the existing ugly linoleum/vinyl floor in my bathroom with tile. With the right information and tools, I don‘t see why I can‘t do it myself. Any ideas on the pros and cons of different types of tile? What‘s least likely to get scratched, and what is least likely crack and need to be replaced? Which is easiest to clean, etc.? I‘m not crazy about a rough feel or look to the tile. So, I‘m thinking of glazed ceramic or polished stone. Also, my bathroom is very small. I wouldn‘t need to use more than 35-40 square feet of tile. Do you think 12x12 size tiles would look too big? Any tips or suggestions will be appreciated!
- Ceramic tiles that have a somewhat porous texture and somewhat marbled appearance. Porcelain and marble, as well a smooth-glazed ceramic, is too slippery. Stone is too porous and subject to trapping dirt (plus I once had a slate bathroom floor that constantly smelled like wet rocks when it got wet or damp). You can also get ceramic tile that looks like stone for less money. Solid colors - particularly white - are a major faux pas with a tile floor. Every piece of dirt, debris, hair, etc., is highly visible. Some kind of slight marbling or travertine looking pattern hides these well. 12 x 12 is an excellent size for a bathroom floor tile. If you have a wood subfloor, make sure you install a layer of 1/2-inch wonderboard and a leveling compound (plasticized cement slurry), plus a slipsheet (plasticized paper layer) before putting down the thinset and tiles. This will ensure that the floor is extremely solid, and that the difference in thermal expansion between the underlayment and the tiles won't result in tile or grout cracking.
- Q: the third tile. All three tiles types have the same side length. Determine the shape of the third tile type.
- Where 3 tiles meet, they must add up to a full 360°. The formula for the interior angle of a regular n-sided polygon is: ((n - 2)*180) / n Plugging in n=4, the interior angle of a square is 90° Plugging in n=5, the angle of a pentagon is 108° The angle of the third tile is x and the 3 angles must add up to a full 360°: 90 + 108 + x = 360 Solve for x: x = 360 - 198 x = 162 Plug that into the original equation and solve for n: ((n - 2) * 180) / n = 162 (n-2) * 180 = 162n n - 2 = (162/180)n n - (162/180)n = 2 (18/180)n = 2 (1/10)n = 2 n = 2 * 10 n = 20 So the third tile must be from a regular icosagon (20-sided polygon) Answer: Regular icosagon; see the picture below.
- Q: The grout in my bathroom is cracking bad and i just had it installed a little over a year ago. I called a different tile guy to look at it and tell me why its cracking. So im trying to figure out who riped me off or whos trying to rip me off. this new tile guy said the grout is cracking because the other tile guy didnt pull the old vinyl up. I remember the other tile guy told me that the vinyl was my moisture barrier so i didnt need anything put on the floor other than the glue ( or whatever you call it) So this new tile guy is saying thats the reason why my grout is cracking because he needed to pull up the old vinyl and the grout would continue to crack until that was done. So that means i need my whole floor re-done with new tile.....so is this new tile guy telling me the truth. Can you install tile over vinyl?
- Tile can be installed over vinyl, if the subfloor is rigid enough, but I don't recommend it. Thinset does not adhere well to vinyl. I have pulled up tile floors laid over vinyl, and they come up very easily, barely sticking at all. Your problem, most likely, is that your subfloor is not rigid enough. This may be caused by floor joist spacing being too wide, or subflooring being too thin. At a minimum, joist spacing should be 16 on center, subfloor should be 3/4 tongue and groove plywood with 1/2 cement backerboard screwed and glued to it with thinset. Older homes have 3/4 plank subfloors, and some newer homes have 5/8 plywood subfloors, neither of which is rigid enough. In either case, the fix would be to glue and staple 1/4 lauan over the subfloor. Staples should be 4 apart along the edges, and 8 apart in the field. Lots of glue. So, if it was me fixing your problem, I would pull up the tile and vinyl, do whatever is necessary to make the subfloor rigid, and relay the tile. And I highly recommend epoxy grout. It's costly, and a bit more difficult to work with, but the end result is vastly superior. It's super hard, keeps it's color, doesn't stain, and requires no sealer. Good Luck with your project, hope this helps...
- Q: tiles on back splash, work done in south florida, 4x4 inch tiles
- I charge around 5 a s/f and if u believe the other tile setters on the forums they are getting much more than i am. I work for 3-$3.50 for builders for basic 12x12 installations. The price goes up for different tiles/sizes/custom/complicated installs.
- Q: Should i tile right to the sub floor. Or do i leave room for a baseboard? or do i put the baseboards over top of the tile and glue them on?
- You really need a baseboard. Especially if your home is not on a concrete slab. Your sub floor expands and contracts with weather and humidity changes. This will put stress on your grouted areas. It can also trap moisture which will create mold underneath your floor.
- Q: I like the original quarry tiled floor from our 60‘s kitchen, but they are quite badly stained. I can‘t pretend they have any historic value, or even were particularly well laid, so on balance should I1) Replace with new tiles, perhaps up to a higher standard2) Get a specialist to restore them to something approaching their original stateWhich will cost more, and what would you do?
- Quarry tiles are made from unrefined extruded, high silica alumina clay that gets pressed into the desired form and hard burnt. They are hard and durable but have a softer composition than ceramic tiles. It is an unglazed form of tile, which comes in a natural colour selection, red, brown and beiges. A good and cheap place to start is to try using raw linseed oil. This will usually remove most of your tough stains. You want to be careful about using acids on real quarry tile because they are very porous and acids could etch your tiles permanently. If the linseed oil doesn't do the trick then a more expensive alternative would be using Lithofin Victorian Tiled Floor Restorer and a good sealer is HG Golvpolish. You should be able to get these from good tile retailers. If the tiles are laid on earth, or on a lime bed on earth, they should not be sealed as they need to breath to avoid damp being trapped. The original tile finish was a clear oil and of course this still allows the tile to breath. Try Slate Dressing from a fireplace shop, this is colourless and will give a richness to the tiles.. Hope this helps.
- Q: 80 cm x 80 cm tiles a piece of weight is probably how many kilograms?
- I sell tiles for 12 years, every day to calculate the fare to the driver, do not count me to him. We are all called
- Q: How to remove paint from wall tile in our 1929 home? Floor tile is original and in excellent shape. Help?!?
- What type of paint and what type of tile? What is the base to your paint, in other words. Different paint and different tiles have different answers. Often with older ceramic tile and if you don't use oil based paint... you can simple take a fingernail and scrape it off easily with no damage to tile. You can try a small razor blade and be very very careful about it, which is what i've done many times. Paint thinner can help, mineral spirits as well. But can hurt many different types of tile. But without knowing specifics, i can't give a specific answer to the best method of getting the paint off.
- Q: My husband and I put ceramic tile floors in our kitchen, dining room, office, and laundry. We cannot seem to get them clean. I use to scrub them with a brush and bleach but can‘t with a small child and being pregnant. We have tried swiffers (wet jet and sweepers) a mop and bucket, a steam mop, nothing seems to get them very clean, just pushes the dirt around. I need something that will get them sparkling and be easy to do while pregnant, please help.
- Oxyclean is the only situation I surely have used that gets the grout sparkling lower back. combination the powder with warm water, permit it soak into the grout, then scrub with a stiff brush. they ought to look good as new.
Send your message to us
Full Polished Glazed Porcelain Tile 600 XD6A530
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1152 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
