Q:Can fiberglass mesh waste be recycled? What can you do if you can?

Glass fiber mesh cloth is flame retardant products, the core material is glass fiber yarn production is completed, so has the recovery effect, which is proved that the glass fiber environmental protection that, during the two days trip I found some problems, the mesh is scrap cut, some are everywhere a throw, some is burned, there is a direct classification.

Q:Where are the steel wire mesh and the alkali resistant grid cloth used in the exterior wall insulation?

The wall is filled with aerated blocks. Use shotcrete interface agent and then steel wire mesh. Is the foundation for the structure of the wall, after the thermal expansion and contraction, plastering no hollowing, cracking. Using mesh cloth for full paving. To reach the wall roughness, strengthen the surface cohesion, and consolidate the grassroots. Steel nets are generally used in the decoration, in the masonry wall and the original wall of the junction, but also can be used in the light body wall reinforcement. Mesh cloth is suitable for use in many parts.

Q:Glass fiber mesh fabric quality, hard and soft for wall, which is better?

I feel that way. While using mesh cloth, you also need to look at the quality of the mesh fabric. In general, the outer wall of the grid cloth with 1 quick money, a square meter or so will be good

Q:What is the use of alkali resistant fiberglass mesh cloth on the exterior wall?

How to identify quality problems of alkali resistant glass fiber cloth, glass fiber cloth market price of 1. of the worst is usually around 1 yuan -1.60 yuan, his glass fiber is usually made of some kind of waste glass beer bottles, the production process for clay crucible drawing, production process is prohibited by the state, the surface coating is non alkali resistant emulsion. From the intuitive point of view: the work is relatively rough, generally sold in the market volume of the theory, often lack of length, grams of weight is not enough, two fold on the break, the contact is not firm, easy to shift, and easy to stab the skin. In the insulation layer in general in the two months after the loss of strength using the grid cloth, if the mortar off grid cloth out, just gently crushed, fiberglass yarn is made into powder.

Q:How is fiberglass mesh used?

Brushing the wall latex Putie mesh cloth, mesh cloth to Putie formation, Jiecha overlap should be at least 50MM, to be completely dry after the wall, and then carry out the procedure.

Q:How to fill the sample size of glass fiber mesh cloth, fill what general specifications

Therefore, the utility model has the advantages of good alkali resistance, flexibility, and high tensile resistance at warp and weft direction. The utility model can be widely used for heat preservation, water resistance and crack resistance of walls inside and outside buildings. Glass fiber mesh cloth with alkali resistant fiberglass mesh, it uses alkali free glass fiber yarn (the main ingredient is silicate, good chemical stability) by structure leno weaving and special organization, after the anti alkali, heat setting treatment such as reinforcing agent.

Q:Self-adhesive fiberglass mesh

Self adhesive mesh and EPS mesh than the general viscous grid has the characteristics and general mesh fabric. But than the general mesh more viscous soft, moderate viscosity, uniform coating, adhesive does not appear in some places, some places less adhesive at the time of construction, to avoid the "bulge" phenomenon.

Q:Glass fiber mesh fabric stereotypes poor, general use of glue is acrylic emulsion, please add what accessories, you can finalize a better shape

Acrylic emulsion less water, that is, high cost. It's cheap and good

Q:What's the use of fiberglass mesh?

Glass fiber mesh cloth with alkali resistant fiberglass mesh, it uses alkali free glass fiber yarn (the main ingredient is silicate, good chemical stability) by structure leno weaving and special organization, after the anti alkali, heat setting treatment such as reinforcing agent.

Q:Glass fiber mesh cloth, crack mortar, tiling there is no problem?

It would be to see how the strength of cement foam insulation board, and you paste the process in order to improve the strength, you can use 1 to 1 fiber cement mortar with latex mixing, can increase the thickness and strength, the cost will be reduced, it can in the brick veneer.