FerroSilicon--45 percentage CNBM's FerroSilicon

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT or LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

FerroSilicon--45 percentage CNBM's FerroSilicon

 

Description

 

Ferro Silicon is a kind of ferroalloy which is composed of ferrum and silicon. Ferro Silicon uses coke, quartz (or silica) as raw materials and is made by electric furnace. Because silicon and oxygen are easily compound into SiO2, the ferrosilicon is often used as deoxidizer in steelmaking.

 

Application

 

1. Ferrosilicon is often used as deoxidizer in steel- making.  

2. Ferrosilicon also can be used as alloy elements join agent, which is widely used in low alloy steel, non-ferrous metal, bearing steel, heat-resistant steels and electrician silicon-steel.

3. It can be used as a reductant in ferroalloy production and chemical industry.

4. In iron industry it can be used as inoculant and nodulizer.

 

Specification

Brand

Chemical  Composition (%)

Si

Al

Ca

P

S

C

Fe

              <=

FeSi75-A

74.0-80.0

1.5

1

0.035

0.02

0.2

Balance

FeSi75-B

72.0-80.0

1.5

1

0.04

0.02

0.2

Balance

FeSi72

72

1.5

1

0.04

0.02

0.2

Balance

FeSi70

70

1.5

1

0.04

0.02

0.2

Balance

FeSi65

65.0-72.0

2

1

0.04

0.02

0.2

Balance

FeSi45

40.0-47.0

2

2

0.04

0.02

0.2

Balance

Size:0-3mm,3-10mm,10-100mm or as the customers’ requirements

Packing: 25Kg/bag, 1MT/bag or as your requirements.


Pictures:

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Carbide drills and high-speed steel drills, which are suitable for processing stainless steel 10?
If it's cylindrical carbide, it's better to be on the drill bit or as a guide
Q:Which prawns know of what is called red hard alloy.
A large amount of microscopic motion of microscopic particles (molecules, atoms, etc), i.e., irregular motion of a large number of microscopic particles that make up macroscopic objects or systems.
Q:Detailed comparison of cemented carbide with diamond properties
Diamond is hard and brittle, with excellent performance, most of the material processing, as is the emerging industry, the production level is uneven, the high price range; processing hard alloy is less, the price is relatively cheap, because it is a traditional industry, level of production is relatively mature. If you are now worried about the choice of a tool for processing, using diamond tools or carbide tools?
Q:Carbide grades, properties and applicable ranges
(3) tungsten tantalum cobalt (WC+TaC+Co) cemented carbide (YA);The addition of TaC (NbC) on the basis of YG cemented carbide improves the hardness and strength, thermal shock resistance and wear resistance at room temperature, high temperature, and can be used to process Cast Iron and stainless steel
Q:How to distinguish cemented carbide grades?
Carbide how to distinguish between help you answer the following, I hope to help youCommonly used carbide WC as the main component, according to whether to join other carbide is divided into the following 3 categories:(1) tungsten cobalt (WC+Co) cemented carbide (YG), as long as pig iron is processedIt consists of WC and Co which has higher flexural strength, toughness, good thermal conductivity, but heat resistance and poor wear resistance, mainly used for processing cast iron and nonferrous metals. YG hard alloy fine grain (such as YG3X, YG6X), in the same amount of cobalt, the hardness, wear resistance than YG3 YG6 high strength and toughness is poor, suitable for machining hard cast iron, austenitic stainless steel, heat-resistant alloy, hard bronze.(2) tungsten titanium cobalt hard alloy (WC+TiC+Co) (YT) "the main processing of wrought iron"Because of the hardness and melting point of TiC was higher than WC, so compared with YG, the hardness, wear resistance, hardness increases, bond high temperature, strong antioxidant capacity, and will generate TiO 2 at high temperature can reduce the adhesion. But poor thermal conductivity, low flexural strength, so it is suitable for processing steel etc. the toughness of materials.
Q:Can ceramic tools process cemented carbides?
No, ceramic cutters are usually used to process cast iron (high speed machining) and high hardness steel (Cui Huogang).Generally, the hardness of ceramic tools reaches HRA91-95, while the hard alloy can reach HRA93.The main components of ceramic tool materials are Al2O3 with high hardness and melting point. Si3N4 and other oxides and nitrides, and then added a small amount of metal carbide, oxide or pure metal additives, formed by pressing, sintering, and then a tool material. Its hardness can reach HRA91 ~ 95, and the hardness of HRA80 can still be kept at the cutting temperature of 1200 DEG C. In addition, the chemical inertia is large, the friction coefficient is small, and the wear resistance is good, and the service life of the processed steel pieces is 10~12 times of that of the hard alloy.Its major disadvantages are brittleness, low bending strength and low impact toughness. Therefore, it is mainly used for semi finishing and finishing, high hardness, high strength steel and chilled cast iron and other materials. Commonly used ceramic cutting tools are alumina ceramics, composite alumina ceramics and composite silica ceramics.Taiwan is hard gold metal carbide with high heat resistance and high wear resistance (WC tungsten carbide, titanium carbide, tantalum niobium carbide TiC TaC, NbC etc.) and metal binder (cobalt, nickel and molybdenum) powder metallurgy products under high temperature sintering. The hardness of HRA8 9 ~ 93, 850 ~ 1000 DEG C high temperature resistant, has good abrasion resistance, allowing the use of the cutting speed can reach 100 ~ 300m / min, can be a variety of materials including machining hardened steel, therefore it is widely available.
Q:What are the advantages of carbide V-CUT knives and diamond V-CUT knives?
Precision machining, high finish, sharp blade, machining V groove surface smoothness, no burr burr, greatly improve product quality.Polycrystalline diamond V-CUT knife is now used more and more, and its advantages are: hardness is higher than hard alloy, longer service life, especially in the CNC V-CUT Slitter, the use of good results.
Q:What are the standard units of measurement for carbide inserts?
Manufacturers usually use KG, which is used inside the shop
Q:How are carbide cutters made? 20
CNC carbide cutter is used to hard alloy powder and powder metallurgy mould after sintering, the hard alloy blade (blank, can not be directly used), then after grinding the surface and edge (this can be installed on the cutter head, and also can be used) in coating the surface to improve its wear resistance, have finished milling blade.The blade is machined with a special blade grinder. The price varies from a few thousand dollars to a few days depending on the size of the blade and the specificity.Surface coating is usually coated with titanium (such as titanium nitride, etc.)Large manufacturers such as diamond coating equipment general equipment in the tens of millions of yuan in cost is quite high, in Jiangsu there is a foreign company specialized in coating equipment sold to undertake external coating business, the coating cost with you a coated blade is related to the price from a few dollars to tens of dollars / piece / slice.
Q:What are the YT and YG carbide cutting tools for each occasion and why is it necessary to improve the quality of the machined surface?
In general, T alloys are mainly used to process ferrous metals, because T alloys contain Ti elements (solid solutions), which can effectively reduce the flank wear and wear resistance of the crater, thereby increasing the tool life;G alloy is mainly used to process non-ferrous metals and non metals, because the G alloy can achieve more sharp tool tip and reduce the cutting force effectively.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range