EPS Expandable Polystyrene
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 23 Tons m.t.
- Supply Capability:
- 2000 Tons per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Detailed Product Description
1.EPS Expandable Polystyrene
2.light, low price, easy to molding
3.free sample
We are manufacturer .In the field of chemical raw materials,we are professional
1.Characteristics:
Good flame-retardant, good frothing good preserving, good binding and low heat-conducting rate.Oxygen index over 30(testing after 7-14 days flowing)
2.Application:
This Flame retardant grade EPS can be
used as building-materials, materials for heat preservation, thermal insulation and for packing precision instruments
used for fire board, eps blocks, fish box production etc.
3.Storage:
The EPS series products of our company need to be put on the place where it is cool and ventilated, keep the storage temperature below 20°C in order to minimize the lost of frothing agents from escaping. The lower the temperature is, the better the quality is. The products should avoid rain, fog, snow and lighting up from the sun, static electricity and flame. Once the package material of the products is open, it should be used up as quickly as possible. Otherwise, the remaining EPS might lose its function due to escaping of foaming agents. If the EPS is stored too long, the expandable times might decrease
We also produce HDPE,LDPE,LLDPE,GPPS,HIPS,PP,PVC,PE100,PE80,PC,ABS etc.
More information please feel free to contact me Lafy
Skype ID:lafylove
4.Specifications
GRADE |
SPECIFICATION |
BEADS SIZE |
FOAM MULTIPLE |
FOAM DENSITY G/L | USE | ||
A-STANDARD GRADE |
A-103 |
1.00-1.60 |
70-90 |
11.0-14.0 | USE FOR BLOCK AND LOW DENSITY PRODUCT | ||
A-104 |
0.85-1.25 |
65-85 |
12.0-15.0 | USE FOR PRODUCT MORE THAN 12MM thick | |||
A-105 |
0.70-1.00 |
60-75 |
13.0-17.0 | USE FOR MIDDLE DENSITY PACKING PRODUCT | |||
A-106 |
0.50-0.80 |
55-70 |
14.0-18.0 | USE FOR PRODUCT MORE THAN 8MM THICK | |||
A-107 |
0.40-0.60 |
50-65 |
18.0-15.0 | USE FOR PRODUCT MORE THAN 6MM THICK | |||
A-108 |
0.30-0.50 |
35-50 |
28.0-20.0 | USE FOR MOULDING AND HEADPIECE ETC SPECIAL PRODUCT | |||
B- HIGH EXPANSION GRADE |
B-103 |
1.00-1.60 |
80-100 |
180-200 |
12.5-10.0 | USE FOR ELECTRIC PACKING,BLOCK,CRAFTWORK, BOX ETC. ESPECIALLY USE FOR LOW DENSITY BLOCK | |
B-104 |
0.85-1.25 |
70-90 |
160-180 |
11.0-14.0 | |||
B-105 |
0.70-1.00 |
60-80 |
130-150 |
13.0-12.5 | |||
B-106 |
0.50-0.80 |
50-60 |
100-130 |
18.0-13.0 | |||
B-107 |
0.40-0.60 |
30-40 |
60-90 |
33.0-25.0 | |||
B-108 |
0.30-0.50 |
20-35 |
40-70 |
50.0-18.0 | |||
F-SELF EXTINGUISHING GRADE |
F-102 |
1.40-2.00 |
50-70 |
20.0-14.0 | USE FOR BLOCK | ||
F-103 |
1.00-1.60 |
45-65 |
22.0-15.0 | USE FOR BLOCK AND BIG PACKING PRODUCT | |||
F-104 |
0.85-1.25 |
40-65 |
25.0-15.0 | USE FOR BLOCK AND BIG PACKING PRODUCT | |||
F-105 |
0.70-1.00 |
40-60 |
25.0-17.0 | USE FOR BLOCK AND MIDDLE DENSITY PACKING PRODUCT | |||
F-106 |
0.50-0.80 |
30-50 |
33.0-20.0 | USE FOR HIGH DENSITY BLOCK AND SPECIAL USE PRODUCT | |||
F-107 |
0.40-0.60 |
25-40 |
40.0-25.0 | USE FOR HIGH DENSITY BLOCK AND SPECIAL USE PRODUCT | |||
F-108 |
0.30-0.50 |
20-40 |
50.0-25.0 | USE FOR HIGH DENSITY BLOCK AND SPECIAL USE PRODUCT | |||
D-FAST CYCLING GRADE |
D-103 |
1.00-1.60 |
60-70 |
17.0-14.0 | USE FOR ELECTRIC PACKING ,BLOCK AND CHINA PACKING AND HIGH DENSITY PRODUCT | ||
D-104 |
0.85-1.25 |
50-65 |
20.0-15.0 | ||||
D-105 |
0.70-1.00 |
40-60 |
25.0-17.0 | ||||
D-106 |
0.50-0.80 |
35-55 |
29.0-18.0 | ||||
AB-SPECIAL GRADE |
AB-101 |
MORE THAN 2.00 |
70-80 |
14.0-12.5 | USE FOR LOW DENSITY BLOCK AND FLOAT BALL | ||
AB-102 |
1.40-2.00 |
80-90 |
12.5-11.0 | USE FOR LOW DENSITY BLOCK AND FLOAT BAAL | |||
108P |
0.25-0.4 |
20-40 |
50-25.0 | USE FOR STUFFING AND CUP | |||
H-PREVENT STATIC GRADE |
SURFACE IMPEDANCE 10 9 -10 12 Ω | USE FOR NICETY PACKING AND ANTISTATIC PACKING |
- Q:PVC what chemicals do you need for plastic surface treatment?
- Different processing methods are often required for different materials.
- Q:How do plastic raw materials trade? How big is the market?
- The transaction is mainly based on the traditional trading model and the Internet trading model 2.
- Q:What kinds of plastic properties can be divided into thermal properties?
- Residual stress in the process of pressing and forming of pvc. Therefore, when heated, the shrinkage rate is relatively large, the longitudinal direction is about 1% to 6%, and the transverse direction is 1% to 2%, which should be taken into account when cutting down the material.Chemical properties of PVC do not contain active groups on the molecular chain, so they have higher chemical stability.Unplasticized polyvinyl chloride is under 50 degrees; it is capable of corrosion of most acids, bases, salts, in addition to strong oxidizing agents such as fuming sulphuric acid and nitric acid of mass fraction >50%. The concentrated sulfuric acid and nitric acid above 50 DEG C make the polyvinyl chloride first form carboxyl group, and then oxidize and crack to form carbonyl group or aldehyde group, thus being destroyed.
- Q:What kind of raw material is plastic hollow board made of?
- Plastic hollow board products widely, can produce hollow board turnover box, hollow board, hollow plate knife clapboard, anti-static hollow board, conductive plastic hollow board products. Multi use in electronic products turnover and handling, warehousing and so on. In addition to the production of flame retardant plastic hollow board, plastic plastic hollow board, back board, magnetic refrigerator with black and white writing board, backplane cloth cabinet inside the closet board and other plastic products.
- Q:How to make plastic raw materials?
- polyethyleneFor short, PE is a thermoplastic resin made by the polymerization of ethylene. Industrially, it also includes copolymers of ethylene with a small amount of alpha olefins. Polyethylene is odorless, non-toxic, feel like wax, has excellent resistance to low temperature performance (minimum temperature can reach -70 ~ -100 C), good chemical stability, erosion resistance to most acid-base (not resistant to oxidizing acid), insoluble in common solvents at room temperature, low water absorption, excellent electrical insulation properties; but polyethylene for environmental stress (chemical and mechanical function) is very sensitive, heat aging resistance difference. The properties of polyethylene vary depending on the molecular structure and density. The products of different densities (0.91 ~ 0.96g / cm3) can be obtained by different production methods. Polyethylene can be used as a general thermoplastic forming method (see plastic processing). Widely used, it is mainly used for making films, containers, pipes, monofilament, wires, cables, daily necessities, etc., and can be used as high frequency insulating materials for television, radar and so on. With the development of petrochemical industry, polyethylene production has been developed rapidly, and the output is about 1/4 of the total plastic output. In 1983, the total production capacity of polyethylene in the world was 24.65Mt, and the capacity of the equipment under construction was 3.16Mt.
- Q:What are the main biodegradable plastic bags made of?
- The degradable plastic bags made of polyethylene and starch, but this can only be degradable plastic plastic degradation into smaller chunks of plastic, plastic compositions did not completely disappear, so its degradation is limited.
- Q:What are the APP of plastic raw materials?
- Thermoplastic engineering plastics (polyamides, polycarbonates, POM, PET, PBT and others)
- Q:How are plastic products made? What is the raw material of plastics?
- Plastic products are divided into: injection molding, blow molding, spray molding, blister, and die casting. Plastic material is oil. It must be done at a high temperature. The mold you call is usually steel.
- Q:What type of raw material is used in plastic bags? The brightness is good. It blows out as bright as a mirror! That kind of transparency!
- PE, the solute has high pressure and good transparency. I've seen a high transparent vegetable packing bag. That's a secret formula
- Q:How to test plastic raw materials?
- Thermal stability test of size and appearance quality. Place the product in a 8020C oven, 24H, and cool down to 2350C (2H). Measure the size of the same measuring point before and after the test, and calculate the percentage change rate. And observe the appearance quality changes, dimensional change rate of <0.2%, appearance is not allowed to have deformation, crack, expansion, surface gray, discoloration and other phenomena.
1. Manufacturer Overview |
|
---|---|
Location | Hubei, China |
Year Established | 2011 |
Annual Output Value | |
Main Markets | North America South America Eastern Europe Southeast Asia Africa Mid East Eastern Asia Western Europe Central America Northern Europe South Asia |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Tianjin,Qingdao,Wuhan |
Export Percentage | 81% - 90% |
No.of Employees in Trade Department | 6-10 People |
Language Spoken: | English, Chinese |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
EPS Expandable Polystyrene
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 23 Tons m.t.
- Supply Capability:
- 2000 Tons per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords