Charger of Cordless Driver 10.8/12V:
* Charger Time: 1Hour
* Housing Material: ABS
* Input Voltage: 110-230VAC
* Frequency: 50/60Hz
* Output Voltage: 12.6V-DC
* Output Current: 1.3A
* HI-POT: 1500V/3mA/1s
* Dimension: L165*W123*H73 mm
* Weight: 0.7Kg
Details of Cordless Driver:
* Battery Voltage: 10.8V
* Housing Material: PA6-GF30%+Over Mould
* No Load Speed 1(Rpm): n0 0-380r/min SPMA10%
* No Load Speed 2(Rpm): n0 0-1200r/min SPMA10%
* Torque Setting: 20+1
* Max Torque: 23N.m
* No Load Current(A): 2.5A MAX
* Chuck Size: 3/8''(10mm)
* Battery Cell Type: 1300mAh or 1500mAh 3.6v/Li-ion
* Normal Capacity Time: 1 hour
* Net Weight Including Battery: 1.0Kg
* Dimension(with P/P): L143*H190*W53mm
* Drilling/ Screwing capacity: Screw sizes: 9/32''(7mm), Steel/Aluminum: 3/8''(10mm), Wood: 3/4''(19mm)
* W/2 speed, Auto-lock, Auto-stop, LED light, mini body, soft grip
- Q:Which is good between pneumatic tools or power tools?
- Pneumatic tools are the mainstream trend, pneumatic tools more suitable for long time work, rather than power tools, permanent fever, and even burned out the internal parts, pneumatic tools can be seen more secure. Power tools initial investment is low, but long-term use of energy consumption is higher, and tool maintenance and replacement costs are higher, and pneumatic tools more environmentally friendly, long-term use cost is much lower than the electric.
- Q:What kind of material does the power tool case have?
- The outer shell is a physical structure, and the enclosure uses support, connecting motors, transmission mechanisms, switches, handles, and attachments to make it the complete outer structure of a complete power tool entity.
- Q:What's the role of carbon brushes in electric tools?
- In addition to induction type AC asynchronous motors, there is no outside. Other motors are provided, as long as the rotor has a reversing ring.The principle of electric power generation is that a magnetic field cuts a wire to produce an electric current in the wire. The generator cuts the wires by rotating the magnetic field. A rotating magnetic field is a rotor, and the wire to be cut is a stator.
- Q:What other tools are there for the furniture except the pistol hole?
- It is mainly used in construction, decoration, furniture industry, opening for objects or objects in the past, also known as hammer in some industries.Well, there are more drilling tools on the market now.
- Q:What are the common rotors of power tools?
- Hammer and drill: used for concrete, brick and building components on drilling, slotting, dehairing. With expansion bolts, installation can improve the speed and quality of pipeline, machine equipment; impact hammer principle is to rely on the internal movement of the piston impact force, impact principle of impact drill is running in gear impact force, so the impact hammer is greater.Concrete vibrator: used for pouring concrete foundation and reinforced concrete members, tamping concrete to eliminate air holes and increase strength. The high-frequency disturbing power of the electric direct acting vibrator is driven by an electric motor to rotate the eccentric block, and the motor is powered by an 150Hz or 200Hz intermediate frequency power supply.The planer: used for planing wood or wood structure, mounted on the bench can be used as a small bench plane. The planer cutter shaft by the motor shaft through the belt drive.Electric tools commonly used bearing type: 606, 607, 608, 626, 627, 628, 629, 6000, 6001, 6003, 6004, 6200, 6201, 6202, 6203, 6303, 61907, 688 commonly used carbon brush models: 50#, 408#, 43#, 44#, 303#, 21#, 6M etc.
- Q:What's the name of an electric tool for riveting screws into wood? Not understand!
- An electric drill can be used! But it can't adjust the torque! There are four types of professional screw twisting tools!
- Q:Is BOSCH's power tools good or MAKITA's power tools?
- MAKITA electric tool features:The utility model has the advantages of small noise, strong power, good performance, long service life, light body, strong and durable, easy operation and convenient repair. The utility model is the necessary high-quality product for professional personnel or amateur DIY personnel.
- Q:What kind of power tools are hand drills? 1, 2 or 3?
- You can see the cable plug, the aluminum shell is inserted three I tools, is grounded, the aluminum shell and some II tools, because it has a plastic insulation between the stator and the aluminum shell, so it is the installation of two wire plug.
- Q:Is the motor of an electric tool the alternating current motor or the direct current motor?
- To be exact, they are generally series motors, so they are alternating current motors. The direct current motor is usually used as charging tool and driven by DC motor. Also useful for three-phase motors, such as concrete vibrators, are three-phase motors.If it is DC power supply, must have rectifier power ah, because the power supply is 220V AC, must be rectified into DC to use.
- Q:What devices must be available for all hand held electric tools?
- Anti leakage, splash prevention, anti movement, anti overheating
We are a manufacture specialized in rechargeable power tools. Our products include cordless series in Drill Screwdriver. Flexible lamp Saws and it's fit together series. Beside,we are incessant imploding the new products for our clients and market.We are holding the certification for "GS" "CE" "EMS" "CSA" etx. Also,is in the process with ISO9000.
1. Manufacturer Overview
|Annual Output Value
||US$ 10 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||71% - 80%
|No.of Employees in Trade Department
||About 2,000 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range