Concrete Pump Truck Camc 39m 6*4 Cement
Certification:ISO9001: 2000, CE
Emission Standard:Euro II&III&IV
Truck Type:Concrete Pump Truck
Packing:by Container/Nude Packing/Roro Ship
Production Capacity:10000 Units/Year
|Complete vehicle ||Performance index||unit||AH5290THB0L4 ( 39m 6*4 )|
|Max. theo. concrete output (L./H.) ||m 3 /h||170|
|Max.concrete pumping pressure||Mpa||7.5|
|Concrete cylinder diameter×stroke||mm||260×2000|
|Distribution valve type||S|
|Hopper volume||m 3||0.6|
|Inside diameter of delivering pipe||mm||125|
|Clean system||Capacity of water tank||L||600|
|Maximum height from the ground||m||38.6|
| Maximum horizontal delivery distance||m||34.6|
|Angle of revolution||.||0~365|
|Angle of development angle||1||.||90|
|Leg span|| LONGITUDINAL SPAN||mm||7976|
|formal||Front Leg span||mm||7794|
|Back Leg span||mm||7764|
|one side||Front Leg span||mm||5397|
|Back Leg span||mm||5382|
|Hydraulic system||High pressure||Mpa||31.5|
|Low pressure||m 3 /h||150|
|High pressure||m 3 /h||/|
|Hydraulic Oil tank||L||800|
|hydraulic pump pressure||Mpa||35|
| Minimum turning radius||m||10|
|Number of axles||3|
|Engine ||Engine||Hino, Cummins ,Sino ,CAMC,Weichai,Hangfa,etc.|
|Emission ||EuroII , III , IV|
- Q:How is the mortar in concrete pumping concrete coexisting and distinguishing in a pump?
- The body should maintain a slow rotation, before discharge, the simplified speed should be accelerated to 20 ~ 30s before discharge.
- Q:What is the difference between concrete conveyors and concrete conveyors?
- The concrete pump is a special machine for conveying concrete. It is equipped with special pipes to transport concrete along the pipeline to the pouring site.
- Q:How much concrete construction is needed for concrete pump construction
- First of all to be able to put down the support of the pump feet, a good pump the length of the pump is not the same, followed by the top of the site to no wires and other obstacles, and finally to ensure that the concrete mixer into the normal and leave,
- Q:How to choose concrete pump concrete pump
- Concrete pouring element concrete pump truck selection should be based on the concrete engineering object, characteristics, the required maximum transport distance, concrete construction plan, concrete pump form and the specific conditions of the line to consider 2. Building type and structure of concrete pump performance Random type
- Q:Concrete pump truck hydraulic system open and closed the advantages and disadvantages of what
- Closed system does not need too much fuel tank, the momentary impact is smaller, variable control is convenient, less pollution, suitable for large flow system.
- Q:How does the cement slurry solidify inside the concrete pump?
- If the solidification is very serious, it is recommended to use ultra-high pressure water jet rinse, this water knife can be directly cut concrete, but the price is relatively large.
- Q:What is the concrete pump pumping technology?
- The second generation of pumping technology: hydraulic commutation technology, completely rely on the main cylinder, the distribution of small fuel tank hydraulic signal changes to achieve action for the change.
- Q:Building concrete pump is how to bulk cement (concrete) to the high
- At the same time, another main cylinder under the action of the pressure, to promote the main cylinder of the piston rod out and at the same time to push the concrete piston out of the concrete tank, through the slide valve Y port into the concrete pipe.
- Q:What is the use of micro-concrete pump?
- Micro-concrete pump is currently the smallest concrete pump, the pump is mainly for some special construction conditions or narrow space construction conditions by the size of the equipment caused by the construction of inconvenient or difficult to complete the construction progress and well-designed high-tech
- Q:What is the difference between the construction of a concrete pump and a concrete distributor?
- I only in the large water conservancy project seen the use of cloth machine, other projects have not seen.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range