Q:How do you remove the gasoline from the rubber band?

Hardware store, where you can buy paint, 5 dollars a small bottle. Give in cloth, repeatedly rub, rub a few will be able to erase. Tips: hand in a plastic bag, or to buy the duck to several gloves, don't get thinner on the hand, will corrode the skin.

Q:How to distinguish sanlux rubber belt quality

The fixed belt conveyor adopts a fixed bracket, and usually the outer end of the roller on both sides of the groove support roller is deflected from the direction of the conveyer belt to form an angle. In this way, because of the existence of the idler angle, the lateral roller has a certain lateral thrust on the running belt. When the belt is in its normal position, the thrust force on both sides is equal in magnitude and opposite in direction. Once the deviation, deviationThe lateral thrust of the side is greater than the other side, and the belt is restored to its normal position under such lateral thrust. It must be pointed out that the relative slip between the belt and the deflection roller will lead to wear of the conveyor belt. Therefore, the angle of the side roller can not be too large, generally 2 3?. Therefore, this method is only effective for the condition of little deviation.

Q:What sectors does rubber drive? That is to say, what are the main uses of rubber?

Rubber seal (automobile, mechanical seal (seal), doors and windows), raincoat, rain boots, high temperature Aerospace insulation film, latex gloves, condoms, car tires. Conveyor belt (ore, iron). Rubber floor tiles and so on. Life, industry, everything!

Q:How should the rubber strap be cleaned and maintained?

Method for cleaning and maintaining rubber band:Avoid contact with acidic substances, such as water, sweat, cosmetics, etc..As a matter of fact, if you wear it regularly, you will need to replace it at a professional watch table for up to 1-3 years.If you like to exercise, and sweat exposure, the natural life of the strap will become shorter.Cold weather, large temperature difference, will also accelerate the aging rubber strap.Don't expose yourself to the sun and don't break it with hard hands.Wash the rubber strap once every to two weeks with soapy water.Try to avoid sharp objects in everyday use

Q:Where can I buy 3mm thick rubber belts, black ones? Best to explain the price per square meter

3MM thick. This is rare. It's PVC or PE. It looks black. But it's not made of rubber, and of course there are black 3MM.

Q:How to clean rubber band?

Rubber Strap Black, how to clean yellow, mostly because of quality problems, if your watch is brand name, but still yellow, that means that you own improper cleaning methods. When washing the strap, use the soap or washing powder to meet the dermal part and clean with toothpaste. After washing, remember to rinse the remaining foam thoroughly and dry it with a dry towel. Remember to stay out of the sun. If the sun is too strong, you can take it out and dry it in the evening. This is my own experience. I hope I can give you some help

Q:90 degree turn conveyor

There are two kinds of rubber belts and plastic belts. The rubber band is soft, so it bends. The rubber belt is suitable for working environment temperature -15 ~ 40 degrees C between. Material temperature shall not exceed 50 degrees C. The angle of upward conveying of loose aggregate is 12 to 24 degrees. For large dip angle conveyor, rubber belts are available. Plastic belt has the advantages of oil, acid and alkali, but it is easy to skid and aging because of its poor adaptability to climate. Bandwidth is the main technical parameter of belt conveyor.

Q:The difference between roller printing machine and rotary screen printing machine

Round screen printing is a kind of printing method that uses the scraper to print the paste in the circle net under pressure. There are several important aspects of rotary screen printing, which are different from other screen printing methods. Rotary screen printing and printing roller, Department of continuous process, printing fabric by wide rubber band is transported to the continuous movement of the rotary cylinder. The principle and the roller opposite to its, is in the round net (nickel net) as internal extravasation (by scraper, bar and slurry pressure) to complete printing;

Q:What is the function of the coal feeder? What are the common types of coal feeder?

During the maintenance of the equipment, the electro-hydraulic or manual plate gate can automatically cut off the coal flow in the bin;The detachable connection is adopted among the parts. The utility model has the advantages of light weight, convenient installation and maintenance, and long service life;The joint of the new type of middle coal belt feeder adopts a special lapping buckle way, and needs no integral disassembly and installation. The utility model overcomes the problems of large labor intensity, long time and influence production for the replacement of the old nail band;

Q:What is the essential difference between the effect of electric tape and rubber band?

Electrical tape refers to the PVC material. Polyvinyl chloride film coated with pressure sensitive adhesive. Generally used in automobile maintenance, wire and cable terminals and intermediate joints insulation protection, acquaintance, color separation, sheath protection, wiring harness.