Q:How big valves and fittings need flange installation, such as gate valves, DN50, DN80 and the like?.

Specifically, look at the pressure of the pipeline, the environment is not big, if large with flange connection, usually hoop or wire can be connected.

Q:Gate valve, butterfly valve, ball valve advantages and disadvantages? What are the usual valves?

Stop valve: a valve that closes the valve and moves along the center line of the valve seat. According to this form of valve movement, the valve seat opening change is proportional to the valve stroke. Because of the valve stem to open or close the trip is relatively short, but very reliable cut off function, and because changes in the valve seat and the valve stroke is proportional, is very suitable for flow regulation. Therefore, this type of valve is very cooperative for cutting or regulating and throttling.Advantages: in the process of opening and closing, because the friction between the valve and the sealing surface of the valve body is smaller than that of the gate valve, the utility model has the advantages of wear resistance. Second, the opening height is generally only 1/4 of the seat channel; therefore, it is much smaller than the gate valve; usually there is only one sealing surface on the valve body and the disc; therefore, the manufacturing process is better and the service is easy to maintain. Because its packing is generally a mixture of asbestos and graphite, it has a higher temperature resistance. Steam valves are normally used with stop valves.Disadvantages: as a result of the medium through the valve flow direction has changed, so the minimum flow resistance valve is higher than most other types of valves; second, due to longer travel, opening slower than the ball.

Q:What are the advantages and disadvantages of flat gate valves?

The advantage of flat gate valve is that the flow resistance is small, and the flow resistance is similar to the flow resistance of short valve. The flat gate valve with guide hole is installed on the pipeline and can be directly cleaned with the cleaner. As the gate is sliding on the two seat surface, the flat gate valve can be applied to the medium with suspended particles, and the sealing surface of the flat gate valve is actually positioned automatically. The seat seal surface is not subject to thermal deformation of the valve body. Moreover, even if the valve is closed in cold condition, the thermal elongation of the stem will not cause the seal to be subjected to overload. The length of the structure is much shorter than that of the ball valve, and it is easier to start. Light plate gate valve is more refined, but the effect is exactly the same.

Q:Will the water supply and drainage to wear civil air defense gate valve, the use of bright rod or dark rod?

2, soft sealing gate valve at the bottom of the pit. No accumulation of slag material, valve opening and closing of the failure rate is low;

Q:Installation and operation instructions of knife gate valve

3., check the packing parts require compaction, not only to ensure the sealing of the packing, but also to ensure that the gate open flexible;4., before installing the valve, users must check the valve type, size and attention to the media flow direction, to ensure consistency with the valve requirements;

Q:What's the difference between the knife gate valve and the stop valve?

Minor force needed for opening and closing.Medium flow is unrestricted.When opening fully, the sealing surface is eroded by the working medium smaller than the cut-off valve.The shape is relatively simple and the casting process is better.The valve is used in the system is relatively large, to close the gate off system; and the valve is used in the system is relatively small, and to adjust the flow quantity of the system, can not be closed gate and globe valves of different specifications for many kinds of occasions, the valve rod valve the dark bar gate valve, wedge gate valve, single valve, multi valve valve body structure is different, large volume.

Q:What else, P54140V, 170V? What do they mean?

P work pressureP54 temperature at 540 degrees of work pressureThe pressure at P54 100 is 540 at the temperature of 100barV valve for chromium molybdenum vanadium steelP54 pressure 140V temperature at 540 DEG C for 140bar valve for chromium molybdenum vanadium steelP54 pressure 170V temperature at 540 DEG C for 170bar valve for chromium molybdenum vanadium steelFrom the JB/T4018 "valve type model preparation method"The standard unit is MPa, but it is usually used in bar

Q:What is an inverted seal gate valve?

The inverted sealing gate valve is provided with an inverted sealing device, and when the valve is fully opened, an inverted seal is formed, and the filling can be changed under the normal operation of the system.

Q:What is the difference between gate valve Z41T and Z45T?

Valve Z41T and Z45T difference is that "41" is dark rod, that is, the screw is not out of the turbine,"45" is the bright rod, that is, the screw out of the turbine.Common points are copper sealed gate valves.

Q:What do you mean by forged steel gate valves 800LB DN20 SW?

Forged steel gate 800LB pressure DN20 is by SW said socketweld (connection)