Antiscorcher PVI/CTP (N-Cyclohexy(thio)phthalimide )
- Loading Port:
- Tianjin Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20MT m.t.
- Supply Capability:
- 120000MT Per Year m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Antiscorcher PVI/CTP (N-Cyclohexy(thio)phthalimide )
Chemical Name:N-Cyclohexy(thio)phthalimide
Molecular Formula: C14H15O2SN
Molecular Weight: 261.34
CAS NO:17796-82-6
1.CAS NO:17796-82-6
2.rubber antiscorcher PVI(CTP)
3.the anti-scorching agent for both natural and synthetic rubber.
Specification of Antiscorcher PVI/CTP (N-Cyclohexy(thio)phthalimide ) :
Item | Crystal | Oiled crystal | Granule |
Appearance | White crystal(granule) | ||
Initial M.P. οC ≥ | 90.0 | 90.0 | 90.0 |
Loss on drying % ≤ | 0.30 | 0.40 | 0.30 |
Ash % ≤ | 0.30 | 0.40 | 0.30 |
Residues on 840μm sieve, % ≤ | 0.00 | 0.00 | \ |
Additive, % | \ | 0.0-2.0 | \ |
Granule Diameter, mm | \ | \ | 2.50 |
Properties:
Specific gravity: 1.25-1.35. Soluble in acetone, benzene, toluol, diethyl ether, ethyl acetate, hot CCl4 and hot alcohol, slightly soluble in gasoline, insoluble in derosene and water.
Application:
Pre-vulcanisation inhabitor. Provide predictable scorch control in most sulphur valcanisation; Improved cost performance through marginal stock recovery, single- stage mixing, higher processing and/or curing temperatures; activity is linear and higher than most retarders; may cause bloom above 0.5 phr. It is the anti-scorching agent for both natural and synthetic rubber.
Packing:
25kg per bag or other packing way as customer request.
Storage:
Keep container tightly closed in a cool,well-ventilated palce. The recommended max storage life is 1 year when stored under normal conditions.
- Q:What is the color of the isobutyl silane impregnant for concrete anticorrosion?
- Should be substandard products, ask for inspection reports, manufacturers qualified to prove, or return.
- Q:How to control the impregnation conditions to obtain the active components of the various distributions of different catalysts
- Personal humor petrocatal (station contact TA) can be given in accordance with the literature of the load, the first comparison of different load methods or different starting materials (salt) of the catalyst is good or bad, determine the load method, and then examine the carrier The impact of the difference, and finally look at the impact of the load. On the second floor of the orthogonal law, very good, but for writing articles, the point too little, not suitable for mapping!
- Q:Friends, ask you a question, the capacitor of the different impregnation, capacitance What is the difference?
- The impregnant determines the dielectric coefficient of the capacitor medium, which determines the capacitance and field strength of the capacitor.
- Q:How to determine the load when the load is loaded
- Wanglilove (station contact TA) is generally enough for a day, in order to completely impregnated, the best long time, so that the lack of immersion hulei1049 (station contact TA) the best time long, let it slowly adsorption! Zhangwei643 (station contact TA) can be a few hours! Lingliaopiao (station contact TA) not so exaggerated, the general two or three hours on the complete .
- Q:The laboratory was used as a rotary sprinkler for impregnation of the catalyst
- The laboratory was used as a rotary sprinkler for impregnation of the catalyst
- Q:Dipping method and precipitation method to prepare the catalyst
- The non-roasting catalyst is easily lost with the solution
- Q:How to do the best volume impregnation to prepare a supported catalyst?
- A certain amount of material by adding excess water, immersed for a period of time after the filter, calculated by the amount of material to be adsorbed by the amount of water, so as to get the saturated adsorption capacity of the material bolted (station contact TA) recommended the use of insects have resources bingyu0729 ( Station contact TA) take a certain amount of material to measure its saturated adsorption volume, then this part is in the back of the impregnation of the precursor solution, it can not be used to be lost? The amount of catalyst to do is not much zhangwengui330 (station contact TA) and other volume impregnation is not the most homogeneous preparation method, in order to achieve uniform control, often take the method of adding additives such as microemulsion
- Q:What is the silane impregnant
- Silane impregnant is a high performance silane product for the anticorrosive effect of reinforced concrete structures on concrete surfaces such as isobutyltriethoxysilane DB-H538, isooctyltriethoxysilane DB-H580, etc. ( China Daoer chemical industry can provide professional). Are relatively stable small molecular structure, painted to the concrete ...
- Q:The use of silane impregnants
- Silane impregnation simply means that the concrete surface is silane sprayed, first explaining what is silane. In the general seawall project, inland saline soil, freezing and thawing damage more serious, harsh environmental engineering are required to do the concrete structure of the silane impregnation anti-corrosion construction, the silane referred to here generally refers to isobutyl (alkene) triethoxysilane DB-H538 (liquid) search and isooctyl triethoxysilane DB-H580 (paste), and the content requirements are relatively high, respectively, requirements for more than 98.9% and 80%.
1. Manufacturer Overview |
|
---|---|
Location | Shandong, China |
Year Established | 2007 |
Annual Output Value | US$ 5 Million - US$ 10 Million |
Main Markets | 20.00% North America 20.00% South America 10.00% Eastern Europe 10.00% Southeast Asia 10.00% Northern Europe 10.00% South Asia 10.00% Western Europe 5.00% Africa 5.00% Mid East |
Company Certifications | ISO 9001:2008 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Qingdao; Lianyungang; Tianjin Port |
Export Percentage | 21% - 30% |
No.of Employees in Trade Department | 3-5 People |
Language Spoken: | English; Chinese |
b)Factory Information | |
Factory Size: | Above 30,000 square meters |
No. of Production Lines | Above 10 |
Contract Manufacturing | Design Service Offered; Buyer Label Offered |
Product Price Range | High; Average |
Send your message to us
Antiscorcher PVI/CTP (N-Cyclohexy(thio)phthalimide )
- Loading Port:
- Tianjin Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 20MT m.t.
- Supply Capability:
- 120000MT Per Year m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products