Air Evacuation Valve DN508 with Solar Water Heater Exhaust Valves

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 pc
Supply Capability:
1000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

1.Packaging & Delivery

Packaging Detail:

standard export packing, steel pallets, wooden pallets, customers required

Delivery Detail:

10 Days

 Air Evacuation Valve  Specifications

1. good structure
2. pressure and impact
3. stability performance

Air Evacuation Valve Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo. Then the film works and adjusts the air pressure back into the safety range.   

2.Product Introduction 

Air Evacuation Valve (So-called Ash Silo Relief Valve or Ash Silo Vacuum Relief Valve): is mainly used on the top of the Steel Silo or Ash Silo to release the extra pressure so that it will stay at a safe range all the time. Vacuum Relief Valve is made up of lid, spring ring, movable ring, film, spring of the retainer ring, retainer  ring, valve lid, Valve base. 

 Air Evacuation Valve is considered as a must-have facility for the ash silo.The pressure may change when the air stream inflows the ash silo or outflows, or the temperature rises or reduces. Release Valve protects the silo from safety hazard

3.Working Principle 

 1.Static status: Once you set up a pressure range. Normally,  pressuer could be maintained at a stable level in the ash silo.The valve lid keeps static, and the whole valve is completely sealed.

2.Pressure-Release Status: when the pressure rises upon the setted range, the valve lid would be opened automatically to release the extra airstream.As the pressure goes down to the standard level, the valve lid would be closed automatically.

 3.Vacuum-Released Status: when the pressure is lower than the Standard Atmospheric Pressure in the ash silo, it generates vacuum in the silo.Then the film works and adjusts the air pressure back into the safety range.So that, Relief Valve protects the silo from safety hazard.

4.Features

1. Customized is allowed.
2. Installing in welding or bolts.
3. Factory price.
4. Stock any time.
5. Positive rating:100%.
6. Neccessary device in storage silo.

5.Our Services

Private Customized:

We design  different Pressure Relief Valve according to specific requirement.

Customers’ Guidance:

Please leave the following info in inquiry

1.  What’s the raw material  ( carbon steel or stainless steel  )

2. What’s the entrance diameter( 508 mm /273 mm  or customized)

Because with these factors, we are able to give you a fast answer.

 

Air Evacuation Valve DN508 with Solar Water Heater Exhaust Valves

Air Evacuation Valve DN508 with Solar Water Heater Exhaust Valves

Air Evacuation Valve DN508 with Solar Water Heater Exhaust Valves

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Signal butterfly valve installation or other valve installation
The installation of the signal valve is in accordance with GB50261-2005The 5.4.6 signal valve shall be installed on the pipe in front of the flow indicator, and shall not be less than 300mm from the flow indicator.The other valve control valve installation, specification, type and location of installation shall comply with the design requirements, the installation direction should be correct, control valve should be clean, no blockage, no leakage; the main control valve should be added headstock logo, the control valve cover shall be provided to indicate position of the mark in the position.1. The installation of the exhaust valve shall be carried out after the pressure test and the flushing of the system pipe. The exhaust valve shall be installed at the top of the water distribution dry pipe and the end of the distribution pipe, and no leakage shall be ensured.2, the valve flow direction should be consistent with the direction of flow in the water supply pipe, water inlet side of the filter is installed, and should be installed in the control valve; the adjustable valve should be installed horizontally, the valve cover should be upward; the proportional valve should be installed vertically: when the level of installation, the valve orifice hole single breath we should double down, breathing valve whose orifice should be in a horizontal position.3 other control valve should be installed to keep a certain distance, to facilitate maintenance and management, installation of multifunctional pump control valve itself with pressure gauge, pressure gauge should be installed in the adjacent parts; import should be prevented in the back before the installation or use of the filter with filter backflow preventer, backflow preventer at both ends the valve should be installed separately, and at least one end of the flexible joint should be installed;
Q:Ketem valve relative to other valve companies in the industry what are the advantages?
Floating hard sealing electric ball valve is suitable for two cutting and adjusting occasions. Connect the valve and actuator by using direct connection, DCL series miniature electric actuator (also can be configured according to user requirements of the electric actuator or pneumatic piston actuator of different types of electronic components and ultra short ball).
Q:How are the types of valves classified?
Pneumatic and hydraulic valvesPneumatic valve and hydraulic pressure based on a certain air, water or oil as the power source, using the cylinder (or cylinder) and the movement of the piston to drive the valve, the general pneumatic air pressure is less than 0.8MPa, the hydraulic or hydraulic pressure is 2.5MPa~25MPa. Such as used to drive diaphragm valves; rotary gas and liquid drives are used to drive ball valves, butterfly valves, or plug valves. The driving force of the hydraulic device is large, and it is suitable for driving large diameter valves. If used for driving plug valves, ball valves and butterfly valves, the reciprocating motion of the piston must be turned into a rotary motion.
Q:What does the "PN" mark on the valve mean?
The valve will usually be marked with "DN.PN." these two signs,DN refers to the valve path, and PN refers to the pressure levelFor example: DN25, PN16Refers to the valve diameter of 25mm valve, the pressure is 16 kg (1.6Mpa)
Q:Which industries need valves?
Valve as a general component, widely used in various industries, but there are three main purpose of application in various industries:1, routine inspection needs;2, new projects supporting;3, emergency reserves.Valve market trendsDue to changes in user demand, the market trend of valve products will also change accordingly. In the future, the main trends are as follows:1 with the transfer of oil development to the mainland oil fields and offshore oil fields, and the power industry under the 300 thousand kilowatts of thermal power to more than 300 thousand kilowatts of thermal power and hydropower and nuclear power development, and valves should be changed based on device applications and the corresponding changes in its performance and parameters;2 urban systems generally use a large number of low-pressure valve, and to the development of environmentally friendly and energy-saving, low iron gate that is used in the past gradually shifted the environment-friendly plastic sheet valve, balance valve, metal sealed butterfly valve and the center line butterfly valve seal transition, oil and gas pipeline projects to develop in the direction, which in turn requires a large number of flat gate valve and ball valve the;
Q:How does the valve close?
This is a relatively vague ah, like the stem ah, usable spanner clamping, clockwise rotation in the end. The handle should be closed groove and the coincidence place.
Q:What are the main equipments for valve production?
Press machine, CNC lathe, instrument lathe, drilling machine, machining center, assembly line, pressure test bench, plane, measuring instruments, etc.Valve (Famen) is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure.Valves used in fluid control systems, from the simplest stop valve to a very complex automatic control system used in a variety of valves, a wide range of varieties and specifications. Valves can be used to control air, water, steam, a variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow. The valve according to the material is divided into cast iron valves, cast steel valves, stainless steel valves (201, 304, 316), chrome molybdenum steel, chromium molybdenum vanadium steel valves, valve, dual phase steel valves, plastic valves, non-standard customized valve material etc..
Q:Remove the handle and lever the stem rotation with a wrench,
1, carbon steel (WCA, WCB, WCC) applies to working temperature between -29 ~ 425 degrees between the middle and high pressure valve. Used for superheated steam. High temperature and low temperature oil, liquefied gas, compressed air, water, natural gas and other media.2 、 low temperature carbon steel (LCB) is suitable for working temperature between -46 ~ 345 Degrees of low temperature valve.3, alloy steel WC6, WC9 is suitable for the working temperature -29 to 595 degrees between the non corrosive medium high temperature and high pressure C5, C12, C12A for working temperature -29 to 650 degrees between the corrosive medium high temperature and high pressure valve.4 austenitic stainless steel for working temperature between -196 ~ 600 degrees corrosion of any medium valve.5,
Q:How to open the gas valve with drawings
First of all, you have to determine the direction of the valve opening, usually homeopathy, it is off, the reverse is open. First: to determine the opening of the valve, are generally ball valve, screw 90 degrees on it. Second. At the top of your house, there is a button that can be pulled out.
Q:What's the difference between a valve and a valve?
In fact, the difference is that a set of valves, including two flanges, bolts, flange pad belongs to a set. A valve just doesn't carry those things.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range