Aerial working platform-26m
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The max. working height of this aerial working platform is 12m.
It can be applied in various conditions for aerial working, such as urban road, suburban road, highway, airport, bridges and culverts and so on.
We start this business from 1998, have many years of design and production experience.For the upper structure, we use HQ600 high strength steel, for some key components, we imported from Europe to assure product high quality.
Our product is durable and easy operation and maintenance, we can supply training for customer in our factory for free. pls find below detail parameters:
Bulletin No. | KFM5143JGK07H | |
Type | GKHZ-26E | |
External dimensions(mm) | 9800×2500×3650 | |
Structure type | Three-section articulated boom & One-section telescopic boom | |
Working Cage | Internal size(mm) | 1100×620×1000 |
Rated loading(kg) | 200 | |
Max. Working height(mm) | 26000 | |
Max. Height from ground(mm) | 24300 | |
Working radius when doing the highest height(mm) | 12000 | |
Max. Raising height of basic boom(mm) | 5500 | |
Working Boom | Max. Raising angle of lower boom(º) | 80 |
Max. Raising angle of upper boom(º) | 70 | |
Max. Raising angle of jib(º) | 90 | |
Boom rack rotation angle(º) | 360 | |
Max. raising of extending boom(mm) | 3500 | |
Outrigger | Vertical span(mm) | 4860 |
Horizontal span(mm) | 4800 | |
Traveling of vertical outrigger (mm) | 650 | |
Adjustment | Single adjustable | |
Lifting | Rated lifting weight(kg) | 995-2000 |
Rated lifting height(mm) | 140000 |
Chassis Introduction
Traveling Performance Parameters |
Chassis model | EQ1141KJ2 |
Persons | 3 | |
Axle base (mm) | 5000 | |
Wheel base (front/rear)(mm) | 1940/1860 | |
Driving mode | 4×2 | |
Front suspension(mm) | 1205 | |
Rear suspension(mm) | 2375 | |
Approaching angle(º) | 25 | |
Departure angle(º) | 11 | |
Max Grade ability(%) | 30 | |
Min. Turning diameter(mm) | 18000 | |
Min. Ground clearance(mm) | 250 | |
Engine | Engine model | ISDe180 30 |
Rated power(Kw/r/min) | 132/2500 | |
Max. Speed(km/h) | 80 | |
Gas consumption per one hundred miles(diesel oil) (L) | 24.6 | |
Specification of the tire | 10.00-20 | |
The whole weight(kg) | 13355 | |
Max. Weight with whole loading(kg) | 13550 |
- Q:How about the commonly used car cranes for the construction of the villa
- Your project needs to meet the 50 tonnage below the maximum radius of work can reach 34 meters, lifting height can reach 45 meters, with the same tonnage car crane compared to the larger weight, operating radius farther, lifting height
- Q:Is the truck crane and truck crane mean?
- The car crane is a specially designed car chassis, mainly lifting the weight of the object, and the range of activities is also great, the lifting capacity of the largest can reach 120 tons
- Q:How long is the depreciation period for a truck crane?
- (D) aircraft, trains, ships other than the means of transport for 4 years;
- Q:What are the truck cranes getting off the system and the car system?
- If your system is a hydraulic or electrical system, then it is divided by the center of the rotating cylinder, and slewing support similar
- Q:What is the difference between the main arm and the basic arm of a truck crane?
- The main arm is for distinguishing between the main arm, the main arm including the basic arm (ie, the first arm), the second arm, the third arm, the fourth arm, the fifth arm (if there is a fifth arm
- Q:How does the car crane handle?
- 3, over 20 years of age can hold a valid identity card to the relevant departments for examination, the certificate can be in the provincial labor skills identification center website (qualification certificate) and the Provincial Safety and Technical Supervision website (IC card card) query authenticity.
- Q:Do you need a harness for a truck crane?
- You ask the car on the car or get off the cab? On the car operating room is no seat belt
- Q:For hydraulic cranes, why adjust the legs must be carried out without load
- This time will be on the hydraulic lock or balance valve spool force,
- Q:What are the daily maintenance of the truck crane?
- Responsible for tracking the progress of the equipment delivered by the equipment manufacturer or agent to ensure that the equipment is on time.
- Q:What is the packaging of a car crane?
- The relevant marks, marks, are hung on or printed on the appearance of the truck crane or on the iron plate.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Aerial working platform-26m
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 100台 /month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords