General Information of 120 Degree Painting UV Resistance  Masking Tape

 1. PACKING:

Core I.D.: 3” (76mm +/- 1)

Jumbo Roll：990mm x 1500m; 80 rolls/20' without pallets

Cut Roll: As per customer’s requirements; fistly several rolls shrink together, then certain quantities into a carton, finally be loaded into container with or without pallets.

 2. Application:

Interior paint masking, silk screening, painting autos, boats, and Electrical industry.

 3. Temperature resistance: 150C for 1 hour

 4. Colors available: White, light yellow, yellow, blue, black, red, green etc.

 5. We could supply OEM service such as core printing with customer's LOGO; round label with design of customers etc.

 6. Special requirements will be satisfied after communications.

Technical Data of 120 Degree Painting UV Resistance  Masking Tape

CONSTRUCTION:
Carrier: Crepe Paper
Adhesive: Water acrylic adhesive

TYPICAL PHYSICAL PROPERTIES of 120 Degree Painting UV Resistance  Masking Tape

Total Thickness (adhesives + carrier): 160 +/- 5 micron
Initial Tack (steel ball):  16#
180O Peel Adhesion (to steel):  5 +/- 0.5N /25mm
Holding Power:  4 hrs
Tensile Strength: 65 +/- 5 N/25mm
Elongation: 10%
Temperature resistance: 150℃ for 1 hour

Remarks of 120 Degree Painting UV Resistance  Masking Tape

1. The data above are typical results and subject to change without notice.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

1. The products should be stored at room temperature and be kept away wet and/or heat source.

2. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

Advantage of 120 Degree Painting UV Resistance  Masking Tape:

• We are a factory professional in masking tape

• Factory direct sales,professional production,quality assurance

• Delivery in time,and any question will be replied in 24 hours

FAQ:

F: What is the MOQ (minimum order quantity) of your products?

A: USD3000 as MOQ. If you need less, we will charge some handling charge to keep cost balanced.

F: What sizes can you supply for the tapes?

A: We can supply jumbo roll, log roll and slitted rolls. For different items, the standard sizes are different. Please refer to our product details.

F: Could you deliver door to door?

A: Normally, for sea shipments, we only deliver to the destination port; and clients should make the Custom clearance. For air shipment, we can delivery the goods to door if client choose to send by courier.