Twisted pair data cable for Twisted pair data cable for LAN
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The cable is manufactured according to the standards of ISO/EIC11801、EIA/TIA-568-B and YD/T1019-2001.
Using a single copper conductor, XLPE insulated, PVC, PE or low-smoke halogen-free sheath
Cable is mainly used for integrated wiring network ISDN, TM155MBPS,622MBPS,1000MBPS, Gigabit Ethernet wiring or backbone cabling.
Type | Structure type | Conductor diameter mm | Insulation diameter mm | Pair | Cable diameter mm |
CAT-5 | UTP(Unshielded) | 0.51 | 0.92 | 4 | 5.6 |
FTP(Aluminum foil overallshield ) | 0.51 | 0.92 | 4 | 5.8 | |
S-UTP(Aluminum foil + Braided general shielding) | 0.51 | 0.92 | 4 | 6.3 | |
CAT-5e | UTP(Unshielded) | 0.51 | 0.92 | 4 | 6.3 |
FTP(Aluminum foil overallshield) | 0.51 | 0.92 | 4 | 6.3 | |
S-UTP(Aluminum foil + Braided general shielding) | 0.51 | 0.92 | 4 | 6.7 | |
CAT-6 | UTP(Unshielded) | 0.57 | 1.00 | 4 | 6.7 |
FTP(Aluminum foil overall shield) | 0.57 | 1.00 | 4 | 6.9 | |
S-UTP(Aluminum foil + Braided general shielding) | 0.57 | 1.00 | 4 | 7.5 |
Type | Frequency (MHz) | Work data | ||
CAT-5 | CAT-5E | CAT-6 | ||
DC resistance of conductor Ω/100m | 9.5 | 9.5 | 6.6 | |
characteristic impedance Ω | 100±15 | 100±15 | 100±15 | |
Max.working capacitance pF/100m | 5.6 | 5.6 | 5.0 | |
Transmission speed | 0.65 | 0.65 | 0.65 | |
Maximum attenuation db/100m | 1 | 2.0 | 2.0 | 1.9 |
4 | 4.1 | 4.1 | 3.7 | |
10 | 6.5 | 6.5 | 5.9 | |
31.25 | 11.7 | 11.7 | 10.6 | |
62.5 | 17.0 | 17.0 | 15.4 | |
100 | 22.0 | 22.0 | 19.8 | |
200 | / | / | 29.0 | |
250 | / | / | 32.8 | |
Minimum near end crosstalk attenuation db/100m | 1 | 62 | 65 | 74 |
4 | 53 | 56 | 65 | |
10 | 47 | 50 | 59 | |
31.25 | 40 | 43 | 52 | |
62.5 | 35 | 38 | 47 | |
100 | 32 | 35 | 44 | |
200 | / | / | 40 | |
250 | / | / | 38 | |
Minimum far end crosstalk attenuation db/100m | 1 | 61 | 64 | 68 |
4 | 49 | 52 | 56 | |
10 | 41 | 44 | 48 | |
31.25 | 31 | 34 | 38 | |
62.5 | 25 | 28 | 32 | |
100 | 21 | 24 | 28 | |
200 | / | / | 22 | |
250 | / | / | 20 | |
Minimum return loss db/100m | 1 | 23 | 20 | 20 |
4 | 23 | 23 | 23 | |
10 | 23 | 25 | 25 | |
31.25 | 21.1 | 24 | 24 | |
62.5 | 181 | 22 | 22 | |
100 | 16 | 20 | 20 | |
200 | / | / | 18 | |
250 | / | / | 17 |
- Q:In the middle of the page there is a section called Connectors, i suppose those are the cables attatched to the PSU, but in total there are 17 cables so maybe i am wrong???It says that there are 6 SATA Cables that look like SATA Power Cables and are i guess haha.I'm pretty sure that the answer is yes, the PSU does have 6 SATA Power Cables attatched to it, but i mean when spending $750 on a gaming computer i wanna be sure lol.
- SATA Power Connector: 6 - YES it does have. If your spending $750 on a computer i'd suggest you get a branded power supply, they last longer and will supply your video card with enough juice to get the job done. what kind of video card are you getting? depending on what card your getting 500 watts may or may not be enough, as the new nvidia cards are very juicy :)
- Q:It isn't the standard power cable, it ALMOST looks like a power cable for a playstation, except it has round on both sides and not just one...Can I JUST buy the plug for it? I lost it when we moved and I need it to make Xmas Cards HAHA
- Check okorder they may have part and express shipping Merry Christmas
- Q:i need to know what kind of cable i need to supply power to my internal dvd player. I ALREADY HAVE AN IDE CABLE
- if you look inside your computer you should see a bunch of cables coming out of your power supply. they are usually red and black with a white connector. that is what you need to plug into your dvd player.
- Q:This is a very small system, just a tape deck, cd player, mp3 input, and a phono pre. This is then run from the L and R outputs from the mixer into a 2 channel EQ, then to a power amp (2x250 @ 2ohm), and from there to 2 vintage kustom speakers.Should I be using TRs or TS cables for all of these connections?FYI the speakers are about 25ft from the power amp on the opposite side of the room
- TRS cables are used for two channels, either to patch stereo signals from one component to another, or for send and return in an effects loop. TS cables are used for single-channel patching, and would typically be used between a mixer and a power amplifier. Speaker cables are different from signal cables, even though they often use the same plugs. Speaker cables should be made of 18AWG or larger 2-conductor wire, whereas signal cables shoud be made of shielded (screened) wire. Be certain to use the correct type of cable for the type of signal being conveyed. You may want to get some local help for this. Someone near you should be able to assist.
- Q:When I plug and unplug a power cable to the net in my home for let's say, 50.000 times a day, why doesn't my electricity-meter not count that power for the monthly electricity fee?When I unplug the cable the cable should still have some electricity flowing through it at the moment of unplugging. That electricity disappears very shortly after . But after unplugging it, it doesn't have any electricity anymore. So some electricity is lost right? How does this work?
- by electricity I assume you mean electrical energy. power is the rate at which electrical energy is consumed. Power is generated by the flow of electrical current across a potential difference. Let's use an analogy. A cable is like a water pipe. Current is like the flow of water in the pipe. Pressure is like potential difference (voltage). When there is a difference in pressure at the two ends of the pipe, water will flow through the pipe. The flow of water carries energy, because it can be used to spin a paddle wheel (motor), and the friction of the water against the pipe (electrical resistance) generates heat. I think your question is something to the effect of, if I suddenly remove the pressure difference across the pipe, won't there still be energy in the water flowing in the pipe, and isn't that energy wasted? Well, there's a difference between water and electrical current: the electron hardly weighs anything. There's very, very little energy stored in the motion of electrons in a wire. When the wire is disconnected, the electrons come to a stop almost immediately, and the amount of energy wasted is infinitesimal. I hope that sort of answers your question.
- Q:The reason being is that I just got a new case and my power supply does not have enough 4-pin male power cables to actually hook everything up. The power supply is 750 watts, so it is strong enough to carry all of the charges. I just can't find one. Help?
- Huh? Devices like ATA hard drives, CD drives, case fans etc have male connectors so what's needed are extra female power leads. So that cable you linked should work. What are you trying to connect?
- Q:Last step to install my amp is the Power Cable. Their is a fuse device i must attach to the cord so im guessing i have to cut the gauge install it on both sides and run it to the battery. Does it matter were this fuse device connects? because i want it right next to my amp.thnx
- It sounds like your talking about a inline fuse holder and if thats true it dosent matter where its located as long as its between your battery and amplifier
- Q:i have a dell inspiron 9100. for some odd reason, it won't recognize its power cable. I have tried all outlets in my room that I can plug it into.
- did you try to remove the battery
- Q:if found the reistance then what are the acceptable limits such that replace the cable or repair the cable
- See the document by Megger on how to determine if a cable is good and much more. This is a very good document that covers both static (insulation hipot testing) and TDR fault location methods.
- Q:What is the difference between rubber insulation and paper insulated power cables?
- Because the AC operation will produce eddy current, will make the steel pipe and cable heat burned
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Twisted pair data cable for Twisted pair data cable for LAN
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords