Order On-line Tracking
Steel shot and grit
QB-25, QB -20, QB -17, QB -14 , QB -12 , QB -10, QB -8 QB -6,QB -5, QB -4, QB -3, QB-2
QG-17,QG -14,QG -12,QG -10,QG -7,QG -4,QG -3,QG -2.
0.3mm,0.4mm,0.6mm,0.8mm,1.0mm,1.2mm,1.5mm,1.7mm, 2.0mm, 2.5mm
Stainless steel shot
Stainless steel cut wire shot
Material selection standard
Proper hardness Hardness for shots should be 5-10HRC higher than shot
Enough density. Min. Density:7.4g/cm3
Proper microstructure: Tempered martensite, tempered troostite+random carbon residue
Shot blasted material condition
high quality low cost
high speed environment protection
Relation Between Hardness And Blasting Effect:
Relation Between Hardness And Resilience:
Quality standard for steel shot and steel grit
steel shot:QB-25, QB -20, QB -17, QB -14 , QB -12 , QB -10, QB -8 QB -6,QB -5, QB -4, QB -3, QB-2.
Steel grit:QG-17,QG -14,QG -12,QG -10,QG -7,QG -4,QG -3,QG -2.
Chemical:C:0.80-1.2% Mn:0.6-1.2% Si:>0.40% S<< span="">0.05% P:<< span="">0.05%
Special:52-56 HRC (543-620HV)
Special:56-60 HRC (620-713HV)
We can produce the special hardness products as per the requirement of customer
Hardness tolerance:±3.0 HRC
Characteristic for steel shot and grit
High cleaning speed
QB Shot, QG Grit has the appropriate hardness, high cleaning speed, good rebound, and it can clean inside-corner or complex shape products. In that case, it can reduce processing time, increase capacity, improve production efficiency and save energy ,reduce manufacturing cost.
Long lasting and less consumption.
QB Shot, QG Grit has less internal defects. Its microstructure of tempered martensite, tempered troostite + dispersed carbide, with High impact resistance, long life. And it can reduce the load of dust collector.
With the effect of stress release and increase the strength.
QB Shot has impact internal organization, and not easily broken. It is equally located, to release the stress, and improve the surface hardness,
Strict quality management
Manufacturing process strictly enforce the IS09001: 2008 international quality system standards, with strict technology control. QC department enforce 24hour tracking monitoring for manufacturing process. All products date can be traceable.
Relation between density and worklife
Hardness is proportional to blasting speed but inverse proportional to worklife. Higher hardness, faster blasting speed, but shorter life with larger consumption. Proper hardness (approx. HRC40-50) will have the most economical efficiency. The proper hardness have good rebound resilience and will clean the corners fully and reduce the working period.
Inner flaws such as air-cavity, fissure and porosity affect the worklife of abrasive and increase consumption.
Density larger than 7.4g/cc has minimum inner defects.
Steel shot and grit selection standard
Equipment adjustment(blasting angle, distance, work piece location, air volume of dust collector, adjustment for separator)
Residual volume or corrosion grade, workpiece hardness
Cleanness grade requirement
Arc height requirement and deforming requirement of the workpiece.
Steel shot quality
Reference table for shots size as per workpiece surface roughness
Workpiece Material shots dia. workpiece surface roughness um Steel, stainless steel 0.3 3.2-6.3 0.5 6.3-12.5 1.0 12.5-25 2.0 25-40 3.0 50-80
Inspect the shot storage inside of the shot blasting machine, and add in time, and the total adding amount should be less than 10% of the inside storage volume to ensure the stable ratio
stainless steel shot
chemical analysis:3.4 austenitic type::
(C)<< span="">0.25%, (Cr)=16-18%, (Ni)=6-10%, (Si)<< span="">1%, (Mn)<< span="">2%
430 Ferrite:(C)<< span="">0.25%,(Cr)=16-18%,(Si)<< span="">1%, (Mn)<< span="">1%
410 martensitic:(C)<< span="">0.25%,(Cr)=11-13%,(Si)<< span="">1%, (Mn)<< span="">1%
microstructure :304:ustenitic type,430:Ferrite,410:martensitic. Density.:7.8g/cm³
1. Manufacturer Overview
|Annual Output Value|
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|No.of Employees in Trade Department|
|No. of Production Lines|
|Product Price Range|