||100% polyester / Rpet
||60gsm 75gsm 80gsm 90gsm 100gsm
||Waterproofing, Roof Coating Reinforcement
Rpet Stitchbond Polyester Mesh, Acrylics and Asphalt for Roof Waterproofing Systems
Polyester Roofing Fabric
2.Roll size:1.1m100m,2100 rolls/40HQ
4.OEM is available
Our Polyester Roofing Fabric is a stitch-bonded, high performance fabric for use in cold applied built-up roofing and roof maintenance systems using either water-based asphalt or acrylic emulsions, or solvent type coatings or mastics. It will readily conform to irregular surfaces and standing seam metal roof decks, and is much easier to handle and apply than other soft polyester sheets. Polyester Fabric is white to off white with lay lines for one and two ply roof systems.
Our Polyester roofing fabric series is a 1.9-3.5 once soft or firm polyester roofing fabrics with high temperature finished made in China.
Our Polyester roofing fabric with good property allows for good strength and lay straighter and smoother with fewer wrinkles during application. diverse quality,competitive ability,best survice.
Uses:An high temperature capable, extra-soft stitch-bonded heat set polyester fabric fabric. Excellent compliance for rougher surfaces. Used with hot and solvent based asphalt roof coatings. Also with water-based emulsion coatings, cold applied built-up roofing, elastomeric roof coatings and most general roof maintenance and restoration systems.
One of the strongest yet flexible fabrics available for adding reinforcement to seams, panel overlaps, splits, joints, cracks, protrusions, and flashings.
The soft grade of fabric is vary pliable and designed to conform to irregular and dissimilar surfaces, yet lay flat.
Marking / Alignment Line is available.
* Water based coatings
* Acrylic elastomeric roof coatings and emulsions
* Asphalt coatings and emulsions
* Solvent based coatings
* All roof repair mastics, cements, wet patch materials, etc
Tensile Strength: 57-74 lbs (ASTM D-1682)
Trapezoidal Tear Strength (16 lbs ASTM D-1117)
Elongation: 61-63% (ASTM D-1682)
Mullen Burst (Ball) 176 lbs (ASTM D-3786)
Weight of Fabric: 3 oz. / sq yard
Thread Count/Gauge: 13 threads per inch (commonly called 14 gauge)
Color: White to off-white with printed alignment stripe.