Technical Data of Mineral Fiber Ceiling:
Fire resistance: Class B1 (standard GB 8624-1997)
Moisture rate (%): ≤3.5 (40℃,70%RH)
Light reflect: 0.70-0.80
Sagging resistant properties: ≤0.35mm
Humidity Resistance: ≥85%
Main advantages of Mineral Fiber Ceiling:
High humidity resistance properties
Excellent light reflectance
No content of asbestos
Zero release of CH2O
Typical Application Areas of Mineral Fiber Ceiling:
Hotel Lobbies and Corridors
Offices and conference rooms
Hospitals and other Public areas
Textures of Mineral Fiber Ceiling:
Astral Series: MA01, MA02, MA03, MA04
Fissured Series: MF01, MF02
Perforated Series: MP01, MP02, MP03
Sand Series: MS01 (real sand), MS02 (perlite sand)
Customized textures are avaliable and costy.
- Q:What is asbestos?
- Telstra should have been replacing the pits over a long period of time BEFORE they started to break down a become a health risk. Now they're caught out having allowed them to get to such a state. They'll have to follow the guidelines of safe asbestos removal.
- Q:How to maintain cabinets fire furniture decorative panels
- Professional answer you, the general cabinet fire board is the ordinary MDF paste HPL, fire rating is B1 flame retardant level.
- Q:What are the characteristics of insulation decorative panels
- Outer wall insulation materials are more varieties, the use of the material to the material, the diversity of the building is also a good decorative effect. Now the insulation board can imitate the appearance of stone, tile appearance and even metal and other appearance, the wall played a late decoration.
- Q:What is the length of the ecological wood trim plate?
- Installation features: The series of products according to personal preferences, choose horizontal equipment, vertical equipment, ramp loading and other installation methods, the general recommended vertical equipment, because the light from the window into the indoor light is horizontal, vertical light and dark side will be more obvious, More prominent three-dimensional effect, and vertical equipment can reduce the accumulation of dust, easy to clean. The series of products are plug-type design, and the same series of different varieties of products are used in the general design of the socket, that is different styles of products can be used with each other to install, to the designer personalized design to provide greater imagination The As a result of the socket design, therefore, the installation of the socket position only need to inject, and then inserted, you can cover the nail and remove the steps to fill the ash. In addition, the same method of processing and solid wood can be sawed, can be nailed, can be shaved, no need to paint, ready to use, the general carpentry can be very light to install, light and fast, a familiar worker can install hundreds of square area a day.
- Q:Formaldehyde is one of the most common pollutants released by some inferior decorative board materials?
- Yes, formaldehyde commonly known as formalin, is colorless, with a strong smell of irritating gas, its 35% to 40% of the aqueous solution known as formalin. Formaldehyde is the original pulp poison, can combine with the protein, inhalation of high concentrations of formaldehyde, there will be severe respiratory irritation and edema, eye pain, headache, bronchial asthma can also occur. Skin direct contact with formaldehyde, can cause dermatitis, stains, necrosis. Often inhalation of a small amount of formaldehyde, can cause chronic poisoning, mucosal congestion, skin irritation, allergic dermatitis, nail keratosis and fragile, nail bed finger pain, long-term inhalation of pregnant women may lead to neonatal malformations, and even death, Leading to male sperm deformity, death, decreased sexual function, serious can lead to lack of reproductive capacity, systemic symptoms are headache, fatigue, poor appetite, palpitations, insomnia, weight loss and autonomic disorders.
- Q:How to use the wall decoration board
- The use of decorative wall panels is simple, generally do not need special technology to operate. The size of the entire decorative plate is 2440 mm × 220 mm.
Install the first size according to the design of cutting, the board cut into the required specifications, the cutting point must be straight. The wall and decorative panels on the back of the brushing adhesive, pay attention must be fully coated, do not have the part of the brush, the wall should be pre-play a good control line pavement, compaction, until the adhesive dry hard, with silicon Patching or pressing.
There is the mouth of the decorative plate width of 90 mm or l65 mm, the length of the general 2440 mm, should be used vertically, the installation should first press the design size of the material, the need for parquet should be cut on the flower after the puzzle Cutting. Before installation, the wall and the back of the board should be coated with adhesive, the adhesive in the upper, lower and middle parts can be painted, the installation of vertical compaction compaction, until the adhesive dry, with wood line pressure side closure.
After installation of the wall decoration board, it is necessary to clean the extruded glue in time to prevent contamination of the board. Wall decoration board can be used after installation, no need to paint varnish and other surface decoration. Wall-mounted decorative panels are required to be flat, hard, clean and dry, and the treatment is the same as the wooden dado.
- Q:Does the decorative plate contain formaldehyde?
- Plywood formaldehyde grade all products can reach e1 level and E0 level, and wholesale plywood to consider to his house to see it! Good manufacturers, operating for 20 years
- Q:What is the difficulty of building materials inside the house for insulation?
- The outer surface of the product and the inner layer were selected aluminum and aluminum film, the middle layer is less than 0.03w / mk thermal polyurethane foam, than the thermal insulation of the external walls to save heating costs 60% (thickness of 15mm ) The physical design of the tongue-and-groove connection between the plate and the board makes the connection tightly without leakage and no leakage. The gap in the tongue and groove allows the board to be flexible and the thermal expansion and contraction of the plate is solved. Vents can be drained away to keep the walls dry. And insulation decorative panels through the keel hanging in the (outside) building on the wall design, make full use of the air in the back of the pendulum flow principle, it and the building inside (outside) between the wall to form an air insulation Layer to achieve the effect of double insulation. The main and auxiliary materials used in the production of the product are light, suitable for different years, different materials of the building, and the new and repair all kinds of buildings with this system without the need for expensive external wall pretreatment, greatly reducing the building Wai Wai cost.
- Q:Does asbestos drip through ceilings?
- No and folks should read your other questions. You appear to be obsessed about the topic. Asbestos is not used in food prep. Asbestos is not a liquid as someone told you before. So either you are obsessing or this is a strange kind of troll.
- Q:UV board in the UVP board difference
- PVC material UV panel, the industry referred to as UVPPVC decorative plate relative to the traditional medium density UV board, the strengthening of an important function - moisture
SERENITY,is a large company which produces light mineral wool acoustic board. It displays a good combination of production , manufacture, supporting sales and international trade.Its products cover more than twenty varieties of six categories, including knurling board, relief-embossing board, printing board, spraying board, stereo-molding board, etc.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
||Japan, Italy, South- Africa ,India, Russia, Malaysia, Singapore, Taiwan and other countries and areas
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range