Technical Data of Mineral Fiber Ceiling:
Fire resistance: Class B1 (standard GB 8624-1997)
Moisture rate (%): ≤3.5 (40℃,70%RH)
Light reflect: 0.70-0.80
Sagging resistant properties: ≤0.35mm
Humidity Resistance: ≥85%
Main advantages of Mineral Fiber Ceiling:
High humidity resistance properties
Excellent light reflectance
No content of asbestos
Zero release of CH2O
Typical Application Areas of Mineral Fiber Ceiling:
Hotel Lobbies and Corridors
Offices and conference rooms
Hospitals and other Public areas
Textures of Mineral Fiber Ceiling:
Astral Series: MA01, MA02, MA03, MA04
Fissured Series: MF01, MF02
Perforated Series: MP01, MP02, MP03
Sand Series: MS01 (real sand), MS02 (perlite sand)
Customized textures are avaliable and costy.
- Q:How to install aluminum alloy decorative panels?
- The method of fixing the slats on a specially made keel
Will be stuck in the keel, keel and base fixed. The keel is stamped from galvanized steel sheet, and when the slats are installed, the slats are placed on top of the keel. This method is simple, reliable, easy to replace.
The above is only one of the said, in fact, many forms of keel, slats cross-section varied, but no matter what kind of cross-section, need to use keel and lath supporting. Keel can be fixed directly with the structure, the keel can also be fixed on the frame, that is, before the keel is not well, should be good structure, and then the keel fixed on the frame.
- Q:What is a three-dimensional decorative plate
- Three-dimensional decorative plate is also called the three-board (3dboard) using the original ecological plant fiber from the most raw materials processing, environmental protection and durability, easy installation, sound insulation, safe fashion. For China's independent intellectual property rights and copyright of the emerging high-tech products.
- Q:How to protect the insulation board to play the greatest insulation effect?
- External wall insulation system should consider the fixed parts, supporting the thermal bridge on the impact of thermal insulation decorative board construction should deal with hot and cold bridge parts - the wall should do insulation decorative plate seal waterproof structure design to ensure that water infiltration insulation layer and grass level; level or tilt Picking parts and extension to the surface should be done waterproofing external wall insulation system installation equipment or pipe should be fixed with the grass-roots and sealed waterproof design
- Q:Wall trim and latex paint that good
- Replacement, latex paint change is relatively easy, and if the new wallpaper is more trouble. If your room is not large, it is recommended that some areas use wallpaper (such as some decorative walls). If the room is large, but also the pursuit of more perfect results, it is recommended to use all the wallpaper.
- Q:Translucent decorative panels, materials, acrylic and polyester differences
- Not the price to be more expensive, excellent West is the use of imported polyester material, you can ask
- Q:The wall of the house by what things can be blocked out of the best point of cheap decorative plate or something
- There is nothing cheaper than scratching the putty again
- Q:Old paragraph Han Lanta front cover stone decoration board
- Hello, this is the assembly problem, in fact, both sides of the length of the column A are the same
- Q:what are some sound absorbing surfaces?
- porous materials like matted or spun fibers, panel absorbers having an impervious surface mounted over an airspace, but porous absorbers are the most commonly used sound absorbing materials like carpet, draperies, plaster...(gotta be aerated), fibrous mineral wool and glass fiber, felted or cast porous ceiling tilespray-applied cellulose, and open-cell foam....but these usually convert the sound energy to heat energy. they all have to be thick coz if its too thin on a hard surface underneath then it wont do much at all...you can also, for panel absorbers, do glazing and other large surfaces capable of resonating when thers sound but thats getting into too much detail... if yur not wanting to do any of that - flat egg cartons!......just plaster them all over the wall making sure there's no gaps or spaces and it works perfectly!!!
- Q:Accord 9 left door door trim how to split ah?
- First find the front switch handle behind a lid, with the weapon to pry it open, the inside of the screw unloaded and then down the armrest also has a lid, the same reason to remove the screw, then look at the right side of the glass edge there is a small Triangle plaque, hand off the edge can be directly removed, no screws, the next step to take a small knife inserted into the door under the edge of the gap, pry open a certain gap with the fingers after the force to break apart, the veneer around Buckle are out, up the trim plate can come up with a little, and then press the door switch handle, so that with the veneer separation, and then pull out the control plug can be.
- Q:Restaurant wall decoration board generally use what material
- Restaurant wall commonly used materials are:
Artificial decorative panels, wallpaper, all kinds of stone, wood finishes paint, finished wood decorative panels, gold foil, all kinds of glass, all kinds of sculpture.
SERENITY,is a large company which produces light mineral wool acoustic board. It displays a good combination of production , manufacture, supporting sales and international trade.Its products cover more than twenty varieties of six categories, including knurling board, relief-embossing board, printing board, spraying board, stereo-molding board, etc.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
||Japan, Italy, South- Africa ,India, Russia, Malaysia, Singapore, Taiwan and other countries and areas
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||30,000-50,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range