Laminate Flooring 8mm Export to Europe 7-12mm Double Click

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
2000 m²
Supply Capability:
2000000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction:

Laminate flooring is a multi-layer synthetic flooring product, fused together with a laminationprocess. Laminate flooring ismost often four layers of materialsFrom topto bottom is Durable Overlay, Decorative Paper, HDF board, Balance Paper.

Durable Overlay is made by applying an AL2O3 solution over transparent paper, AL2O3 is very fineand thus it does not hide the color and design of the decorative paper.

Decorative Paperis a computer made paper which imitates natural wood, stone etc, by applying AL2O3to decorative paper, the latter becomes protected from the environment.

HDF board are made of wood fiber compressed into a high density panel (≥880kgs/m3).

Balance Paper is the thick and strong paper treated with AL2O3 on the back of laminate flooring,it gives stability to the laminate flooring boards and provide a measure ofisolation from under-floor humidity.

Wear Rating:

Durable Overlay Thickness

Applying Place

Euro Grade

EN438

EN13329

China National Stand

22gm2

21 Family Low Grade

AC1

2000

≥600

1500

33gm2

22 Family Medium Grade

AC2

4000

≥900

2500

39gm2

23 Family High Grade

AC3

6000

≥1800

4000

45gm2

31 Commercial Low Grade

AC3

9000

≥2500

6000

62gm2

32 Commercial Medium Grade

AC4

12000

≥4000

9000

76gm2

33 Commercial High Grade

AC5

15000

≥6500

12000

Formaldehyde EmissionE1

Moisture Content≤12%

Surface: Mirror, Middle Emboss, Fine Emboss, Crystal, Hand Scraped        

Specification:

Thickness: 7.3mm,8.3mm, 12.3mm, 15.3mm

Based on order, other specification are alsoavailable.

Packing: 8-10 pieces per carton, 35-60 cartons perpallet, about 20 pallets per container.

 Laminate Flooring 8mm Export to Europe 7-12mm Double Click

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Composite flooring used again
It should be said, but can not use four or five years this is not good to say, because you know your own home floor, installed after five years, why some good, some have been broken it. As for the effect Well, you are a good patch together should be no problem, you will not put together the bad together to see the effect of it The
Q:How to install the wooden floor of the stairs?
According to the width of the stairs, the purchase of relatively wide format of the floor, strengthen, composite, solid wood can be. Strengthening and composite generally use floating installation, solid wood is used to play keel installation. Measuring the smoothness of the stairs, the error per meter more than 3mm need to first leveling treatment. The order of installation is from the bottom to the top, the sound of the edge of the valley, such as the installation of the operation of the more accurate and incidentally check the stairs floor of the anti-pressure and normative. The first level of the staircase is the facade, so the floor expansion and expansion ratio should be taken into account when installing the floor floor. When the floor floor is installed to the elevation, the space between the facade floor and the floor floor should be kept enough space. The floor of the floor on the ground floor, you can carry out the next step to install the stairs floor. In the installation of flat flooring, the need to accurately measure the level of high correlation, to ensure that the measurement line and cutting the standard cut. The gap between the facade and the plane is not allowed to exceed 0.5mm; facade or plane and the wall, the gap between the skirting board is not allowed to exceed 1mm; floor and floor surface joints, strengthen the floor does not allow more than 0.2mm, solid wood flooring Allow more than 0.5mm.
Q:How does the composite wood floor rise?
Keep ventilated, or flatten with heavy objects
Q:Why is the middle of the composite floor plate foam
First, the quality is not good, the second is damped. I hope my solution will help you
Q:Not the more layers the better, which is the difference between the two different thickness of the plate
This is a composite laminate flooring
Q:Strengthen the first floor of the composite floor when the installation of the tank to the wall?
Protruding to the public slot, against the wall
Q:How to shop the natural wood flooring
First keel, in the equipment, with the same solid wood
Q:How to deal with composite floor cracks
1. buy "bakelite powder" with a dish Sheng, drip into the water to the slurry, and then brush the cracks, a little spray into the water, fill in the bakelite pulp can be. Usually a night time bakelite pulp will dry through the hard, the floor can be trampled as usual. 2. You can use wood chips (sawdust) and alum, toner and water into a paste, fill in the cracks in the cracks, to be dry after the sandpaper with water sanding smooth, and then brush on the varnish can be. 3. The quality of the floor, you can find a dealer asked to rework or compensation in the love of living above a lot of composite floor cracking solution, there is time you can learn from. I wish you an early solution!
Q:What do you need to pay attention to the installation of composite flooring?
The ground must be flat, do not have any debris
Q:Are not laminate flooring environmentally friendly?
Can not say that is not environmentally friendly, but relatively speaking: solid wood composite floor is indeed enhanced than the composite floor laminate laminate laminate laminate laminate flooring by the wear-resistant layer, decorative layer, grass-roots, balanced layer composition. Advantages are wear-resistant: about 10 to 30 times the ordinary paint floor of the floor; beautiful: available computer simulation of a variety of wood grain and pattern, color; stability: completely broke the original wood organization, destroyed anisotropy and Wet expansion and contraction characteristics, the size is very stable, especially for the warm room to the room. Advantages Wear: about 10 to 30 times more than ordinary paint floor. Beautiful: available computer simulation of a variety of grain and pattern, color. Stable: completely break the original wood of the organization, destruction of the anisotropy and wet expansion and contraction characteristics, the size is very stable, especially for the floor to warm the room. In addition, there are impact, anti-static, resistant to pollution, light resistance, resistance to burning cigarettes, easy installation, maintenance and simple. Disadvantages of blisters can not be damaged after damage, foot feeling poor. In particular, it is pointed out that there have been dealers in the past that strengthen the composite floor is "waterproof floor", which is only for the surface, in fact, strengthen the use of composite flooring only to avoid the blisters.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range