Laminate Flooring 12mm Export to Europe

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
2000 m²
Supply Capability:
2000000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Introduction:

Laminate flooring is a multi-layer synthetic flooring product, fused together with a laminationprocess. Laminate flooring ismost often four layers of materialsFrom topto bottom is Durable Overlay, Decorative Paper, HDF board, Balance Paper.

Durable Overlay is made by applying an AL2O3 solution over transparent paper, AL2O3 is very fineand thus it does not hide the color and design of the decorative paper.

Decorative Paperis a computer made paper which imitates natural wood, stone etc, by applying AL2O3to decorative paper, the latter becomes protected from the environment.

HDF board are made of wood fiber compressed into a high density panel (≥880kgs/m3).

Balance Paper is the thick and strong paper treated with AL2O3 on the back of laminate flooring,it gives stability to the laminate flooring boards and provide a measure ofisolation from under-floor humidity.

Wear Rating:

Durable Overlay Thickness

Applying Place

Euro Grade

EN438

EN13329

China National Stand

22gm2

21 Family Low Grade

AC1

2000

≥600

1500

33gm2

22 Family Medium Grade

AC2

4000

≥900

2500

39gm2

23 Family High Grade

AC3

6000

≥1800

4000

45gm2

31 Commercial Low Grade

AC3

9000

≥2500

6000

62gm2

32 Commercial Medium Grade

AC4

12000

≥4000

9000

76gm2

33 Commercial High Grade

AC5

15000

≥6500

12000

Formaldehyde EmissionE1

Moisture Content≤12%

Surface: Mirror, Middle Emboss, Fine Emboss, Crystal, Hand Scraped        

Specification:

Thickness: 7.3mm,8.3mm, 12.3mm, 15.3mm

Based on order, other specification are alsoavailable.

Packing: 8-10 pieces per carton, 35-60 cartons perpallet, about 20 pallets per container.

 Laminate Flooring 12mm Export to Europe

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the difference between the three-storey and multi-storey parquet? The more layers the better?
Three-tier solid wood flooring it produced earlier, by the panel, core board, backplane three layers of wood together. The surface layer for the quality of high-quality timber specifications lath puzzle or the whole board, the use of oak wood, beech, birch, ash, etc .; core layer by the ordinary soft mixed specifications of wood panels, Etc .; the bottom of the peeling veneer, wood species with more poplar, birch, pine. Three-layer structure made of plastic laminated, multi-layer solid wood flooring is a multi-layer plywood as the substrate to the specifications of hardwood foil inlaid puzzle or veneer for the panel, laminated from. Multilayer solid wood flooring It consists of seven or nine layers, the stability of the three solid wood flooring better. Especially in the geothermal environment, multi-layer solid wood flooring heat resistance is stronger, more difficult to deformation. So at the time of purchase according to their own needs, to find out whether to buy three or more layers of solid wood flooring. If you choose the geothermal floor, it must choose a multi-layer. Among them, three solid wood flooring more environmentally friendly, the price is much more expensive than the multi-layer solid wood flooring. Three layers of solid wood flooring surface made of precious wood, the bottom is made of fast-growing wood processing. Prices are also affected by wood species. Three layers of solid wood flooring changed the previous physical structure, stable performance better. In the price, than the solid wood flooring to be cheaper, are middle consumer products. Is the home decoration in the more popular a class of ground decoration materials. The general three-tier solid wood flooring prices in 150 yuan / ㎡-300 yuan / ㎡ between the floor are also good.
Q:Three layers of solid wood flooring and nine layers of solid wood flooring What are the shortcomings?
Three layers of solid wood flooring and multi-layer solid wood flooring advantages and disadvantages: the current solid wood flooring has three layers and the burden of Pennsylvania bang bogey with respect for the multi-layer two. Home decoration is commonly used in three layers of solid wood flooring, three solid wood flooring surface for the quality of valuable timber flakes, the middle and the bottom for the fast-growing wood, made of hot glue. Surface thickness of about 4 mm core layer in 8 to 9 mm, the bottom 2 mm or so, the total thickness of the general are 14 to 15 mm. Multi-layer solid wood composite flooring to multi-layer plywood as the substrate, the surface of hard wood chips inlaid plywood or sliced veneer, made of hot glue. The number of layers of the plywood must be three or five layers, the surface is hardwood, the thickness is usually 1.2 mm, the planer is 0.2 to 0.8 mm, and the total thickness is usually not more than 12 mm.
Q:It is good or seamless for the elephant floor
There are two kinds of composite floor chamfering plate and molding plate. There are seam for the chamfering plate, seamless for the molded plate: ridicule cans of the immortal immortal Gui Jing pupil careful observation of the chamfering board around the paint for the edge, no wear-resistant layer, and can not be strict fit, A gap will seepage into the seepage of water, not take care. At the same time the paint side will be 1-2 years off, the substrate exposed to the outside, the water will penetrate into the substrate greatly affect the life of the floor. And the pressure plate wear layer is extended to the edge of the surface is a whole; combined with the assembly after the tight seam, just to make up for the lack of chamfer board. Another key can not be ignored is the lock, chamfering board is often flat buckle, in the process of flat buckle easy to fall off; and the new arc intelligent deduction bite force to avoid the use of the process of the above problems. Choose the floor
Q:World solid wood composite floor quality how?
World solid wood flooring quality is possible, with solid wood flooring natural wood and Shu long ingot melon of the cover to sleep well enough foot feeling, and the world solid wood flooring there is a good advantage of environmental protection is very good The Home plans to buy solid wood flooring, then choose the World Friends is wise!
Q:How long can a composite floor be used?
How long can a composite floor be used?
Q:Composite floor raw insects
Insects need to have a certain degree of humidity and temperature, so if the floor of the insects, the vast majority of the reasons for the dampness of the disaster, so the key is pest control moisture. Experts, many users are paying attention to the surface of the decoration problems, and some hidden works are often overlooked, especially for the straight shop of wood flooring, the ground leveling is very important, the general hair is best to use dry powder to light , Because the hair of the exposed sand, but the temporary absorption of water, meet the appropriate environment will be the tiger raft Hong Kong drums wind attack card water release again. The dry powder can not only absorb the excess water can also play a protective film to lock the role of moisture, to prevent back tide, but also conducive to effectively measure the ground flatness. Some people think that the wooden floor pavement before the ground sprinkle a layer of charcoal, charcoal or pepper and other things can effectively prevent the insects, experts believe that this approach is not desirable. Charcoal, charcoal, although in the short term can absorb moisture, but does not digest the moisture, often again released, the same can not reach the purpose of moisture. And the practice of pepper is not desirable, usually dry pepper can be insect repellent, but many examples show that pepper is often caused by wet insects and then caused the floor insects. So, the best way is to do a layer of moisture to the ground to deal with, or more brush a layer of moisture-proof paint.
Q:In the composite floor and then lay a layer of composite floor floor?
It can be, but your door should be done again. Proud home, so that every family has become a model!
Q:What is the height of the solid wood flooring and the composite floor after laying?
Keel generally have 3X float the first cut Ying electric charge nail japonica 4 and 4X5 and 4X4, single solid wood is generally 18MM and 20MM. After installation height is 6CM to 7CM. Composite flooring is generally 13MM to 15MM, plus mat 5MM, installed after 18MM to 20MM. Height difference 4CM to 5CM.
Q:How to shop the floor
Ready to hammer, and a board, each board to fight up when there will always be gaps, with a hammer pad with a knock on the board, the raft razed the drums can not directly knock on the floor, the floor will be knocked on the floor , Skirting line, then directly with glass glue it, a simple point
Q:How to look at the thickness of the surface of the parquet
Home set the oak wood composite, the seller said the surface is 2MM, and later looked under the surface of the paint layer under the color of the deep point of only about 0.6MM, followed by a vertical direction with it a layer of wood, do not know is not oak , The color should be light. The two add up to 2MM, is the seller cheated me, or the surface of the solid wood is faintly closed spring 莩 莩 Feng Tong Tong Kun by the two layers of combination, thin deep color + light with its vertical direction. More

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range