Laminate Flooring 8mm Export to Europe HDF
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Introduction:
Laminate flooring is a multi-layer synthetic flooring product, fused together with a laminationprocess. Laminate flooring ismost often four layers of materials，From topto bottom is Durable Overlay, Decorative Paper, HDF board, Balance Paper.
Durable Overlay is made by applying an AL2O3 solution over transparent paper, AL2O3 is very fineand thus it does not hide the color and design of the decorative paper.
Decorative Paperis a computer made paper which imitates natural wood, stone etc, by applying AL2O3to decorative paper, the latter becomes protected from the environment.
HDF board are made of wood fiber compressed into a high density panel (≥880kgs/m3).
Balance Paper is the thick and strong paper treated with AL2O3 on the back of laminate flooring,it gives stability to the laminate flooring boards and provide a measure ofisolation from under-floor humidity.
Wear Rating:
Durable Overlay Thickness | Applying Place | Euro Grade | EN438 | EN13329 | China National Stand |
22g／m2 | 21 Family Low Grade | AC1 | 2000 | ≥600 | 1500 |
33g／m2 | 22 Family Medium Grade | AC2 | 4000 | ≥900 | 2500 |
39g／m2 | 23 Family High Grade | AC3 | 6000 | ≥1800 | 4000 |
45g／m2 | 31 Commercial Low Grade | AC3 | 9000 | ≥2500 | 6000 |
62g／m2 | 32 Commercial Medium Grade | AC4 | 12000 | ≥4000 | 9000 |
76g／m2 | 33 Commercial High Grade | AC5 | 15000 | ≥6500 | 12000 |
Formaldehyde Emission：E1
Moisture Content：≤12%
Surface: Mirror, Middle Emboss, Fine Emboss, Crystal, Hand Scraped
Specification:
Thickness: 7.3mm,8.3mm, 12.3mm, 15.3mm
Based on order, other specification are alsoavailable.
Packing: 8-10 pieces per carton, 35-60 cartons perpallet, about 20 pallets per container.
- Q:Home set the oak wood composite, the seller said the surface is 2MM, and later looked under the surface of the paint layer under the color of the deep point of only about 0.6MM, followed by a vertical direction with it a layer of wood, do not know is not oak , The color should be light. The two add up to 2MM, is the seller cheated me, or the surface of the solid wood is faintly closed spring 莩 莩 Feng Tong Tong Kun by the two layers of combination, thin deep color + light with its vertical direction. More
- We should buy a multi-layer solid wood flooring, in general, the thickness of the floor to determine the price of the floor with the quality of the oak flooring you buy the floor, you buy the oak flooring , The surface of such a thin, then the price of the floor is not expected to be very high, good floor each layer is very clear, you said that the vertical layer that is not oak, domestic are generally Zamu, import floor, core material in general Are pine. Do not know that you buy the brand, but I sell the experience of the floor, the seller a little 忽悠 you. Purely personal experience
- Q:Will the professionals, strengthen the composite floor really can not touch a drop of water? If it is true
- You ask, it is very professional, all wood products will have a water content of a standard
- Q:Thank you for helping me? There is the price
- Single identification method is: solid wood flooring is full of wood, no adhesive layer, the surface is leaching paint. Solid wood flooring in general thickness of 18 mm. As long as you will be solid wood flooring before and after you can see. The composite floor, is a number of layers of material paste, which has a substrate, but also to the surface of solid wood, or other material surface, no matter how it is a combination of a number of layers of bonding, as long as the adhesive can not be separated from the chemical Adhesives, which have a pollution problem, so, no matter how "green" composite floor, are less than the real environmental protection of solid wood flooring. Although the composite floor thicker than the ordinary floor, but also generally in the 12-15 mm or so. From the surface of the wear resistance of the surface, and some composite floor to absorb the laminate flooring production methods, with the strengthening of the surface layer of the surface to do the surface, the wear resistance than the solid wood flooring. But if the surface of the composite floor is solid wood, then the same with the solid wood flooring. From the floor of the telescopic deformation, the composite floor is stronger than the solid wood flooring, because a number of composite layer of the paste so that the deformation of the composite floor is very small. According to the two characteristics, therefore, the common choice is to strengthen the floor (or high wear resistance of the composite floor) in the living room, and the solid wood flooring in the bedroom.
- Q:Composite floor on the human body in the end how much harm, the bedroom can not shop?
- Tiles and flooring can be said to have their own strengths and weaknesses, each other merits and demerits, if the economy can afford, it is best to shop solid wood flooring, but the price is high, take care of the trouble, the most full pavement parquet, so warm And comfortable, care is also simple. If more guests at home, the living room on the choice of floor tiles, bedroom selection of solid wood flooring, which is relatively practical 籂 single burning pole dolphin fence a little bit. In fact, now a lot of good tiles prices are not low, coupled with the pavement fee, the overall operator is not necessarily cheaper than the floor. If you want to shop the floor, it is recommended to use solid wood flooring.
- Q:can engineered flooring be used in a bathroom?
- By engineered flooring, do you mean laminate? If so, then YES. Basically, any type of floor covering can be used, even carpet, although not recommended.
- Q:What about oak wood flooring?
- Yes, oak itself is a valuable tree species, coupled with solid wood composite flooring stability.
- Q:How to protect the floor?
- 1. Keep the floor dry and clean, do not allow the mop with a dripping mop, or use alkaline water, soap and water to wipe, so as not to damage the luster of the paint surface; if the air is dry, the mop can be wet or put a pot of water on the heating or Humidify with humidifier. 2. Try to avoid sun exposure, so as to avoid long-term surface paint in the ultraviolet radiation in advance of aging, cracking; If the drug or pigment, must be in the end of the stain if the wood surface to be cleared before the surface; 4, the surface of the board should be removed in a timely manner; The floor as far as possible to avoid contact with the water for a long time, in particular, can not be in contact with hot water, so, once there is hot water 禒 set to operate Ou dry dry fork sucking often scattered on the floor, It is best to play every three months of wax, waxing the floor before the stains to clean up the surface. In fact, do not play can, but often wax, can keep the floor finish, extend the life of the floor. 6. To avoid sharp objects scratched the ground, do not throw cigarette butts on the floor or directly placed too hot things, try to avoid drag heavy furniture
- Q:Solid wood composite floor to buy what to pay attention to
- 1. As with solid wood flooring, solid wood flooring is also divided into excellent, first class, qualified three categories. Appearance quality is an important basis for grading. 2. There are two kinds of solid wood flooring, one for the three solid wood flooring, which produced earlier, by the panel, core board, backplane three layers of wood together. 3. Consumers in the purchase, through the multi-layer solid wood floor of the four sides of the tenon, you can see the body of the crown of the liver and the Philippines to the veneer layer of superstructure. 4. Paint quality and coating method is to determine the floor environmental protection, wear resistance, hardness and other parameters of the important factors 5. Multi-layer solid wood flooring by a number of wood board assembled from bonding, the quality of the floor adhesive, environmental performance It is important. 6. Get the floor, you can in a box in the hand to take more than 5 floors placed on the glass table or flat on the ground, to assemble. 7. Solid wood flooring laying methods are many, no matter what kind of laying method should be standardized. And the best is who to sell who installed, to avoid unnecessary buck and trouble. More detailed related content can go to the only excellent network of the only excellent college to see, hope to be useful to you
- Q:The slab can vary in depth from -1inch to 0inch over a 10 foot range.we tried self leveling concrete. some parts of our initial pour,when we just learning did not turn out so well. now there are small areas that are as much as +.75inches.Can we shave/grind the high spots down. Do you recommend that we grind these spots down before installing the flooring?
- If this is glue down installation, you need to grind and fill. This could take a professional 3-4 different coatings to get it exact. It is easier to fill than grind. I would error on the side of caution. If it is rolling, you may chase it around the room the first couple of times. If it is a floating floor I would do nearly the same thing, except it does not have to be quite as prefect. I would take a level, the longer the better and grid out the floor marking with a crayon marking highs and lows. Screed from high point to high point. Let it dry. Sand. Screed again. Keep repeating until you meet the specifications in the instructions for the flooring.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Laminate Flooring 8mm Export to Europe HDF
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
