Q:What is the wedge type gate valve wedge is what mean

B. wedge type single gate, it is the whole wedge gate. In the process of opening and closing the sealing surface is prone to scratches, easy to make the temperature change gate wedge live. It is a gate used for normal temperature, medium temperature and various pressures. C. wedge double plate, which is composed of two gates composed of spherical top hinged into wedge-shaped gate. The advantage is that the accuracy of the cover angle is lower; the sealing surface of the gate can be compensated by adding shim at the top of the seal; the temperature changes are not easy to cause the phenomenon of the card master, nor should it be abraded. Because the gate is movably connected and has more parts, it is easy to bond in the viscous medium and affects the sealing. Especially when the upper and lower baffles are corroded all the year round, the flashboard falls off arbitrarily. It is usually used for water, steam and gas pipelines.

Q:Is the axial force and torque of the wedge gate valve the same?

B higher temperature. C nice wedge single gate valve is suitable for high temperature medium easy to coking. Flexible gate valve features: high temperature, a wedge type single gate valve in a special form. Comparison with wedge gate valve.

Q:What is the meaning of socket welding gate valve A105, D&S:STLT, STEM:13Cr, CL800, SW, AP1602, BB-BG-OS&Y?

Body material: A105Sealing surface material: STLStem material: 13CrPressure rating: CL800Connection: SWImplementation criteria: AP1602BB-BG-OS&Y: plain rod support, bolt connection, flange valve cap.

Q:What does valve qz45x - 10q mean?

Crown valve pressWhat does Q stand for? I'm not sure. It's probably made of ductile iron"Z" means "gate valve"4 represents flange connection5 represents the dark bar (1 represents the Ming pole)X stands for rubber seal and soft seal10q stands for 10 pressure

Q:What are the structural differences between parallel and wedge valves?

The double gate is pushed aside so that the sealing surface of the valve gate is tightly sealed with the valve body. These double gate parallel gates are mostly used on low pressure pipelines such as small pipelines. Parallel gate valves are also available with single gates, but are rare.That the sealing surface has a certain angle with the vertical center line, bearing higher medium temperature valve, angle the greater the possibility to reduce the temperature when wedged gate rice.Wedge gate valve single, double all.

Q:what are their applicable conditions? Advantages and disadvantages?

The gate valve is one of the simplest valves. Generally manual, most of the electric valve failure, as a manual. Butterfly valve is more, I saw the pneumatic butterfly valve, that is, with gas control closed, general and solenoid valve matching.Without strict conditions and advantages and disadvantages, of course, the equipment requires a relatively high degree of automatic control. I can check it out on Baidu.

Q:greater than DN50 of the pipeline butterfly valve?

I don't know why it was designed. Provide you with some information you refer to, I do not know if it works for you1, stop valve and gate valve are very expensive, more than DN50 can make a lot of money2, butterfly valve is only more than DN50, no small, there may be, but I almost can not see the market.3, like DN150, DN200 such cut-off valve, gate valve is very large, and the butterfly valve is relatively light, installation can save the cost of the block, the valve itself saves too much money.4, but most of the butterfly valve used for a long time are closed.

Q:What valve is z45w gate valve?

Cast iron gate valve with turbine head, please contact me

Q:What is the gate valve for the DN65 hydrant?

DN65 hydrants are available with either DN65 gate valves or butterfly valves.

Q:What does gate valve Z41H-40 mean?

Z - that means gate valve (the initial letter of Zha)4---- is the connection form, which means flange connection1---- form of structure, which means Plain Bar wedge type rigid single gate valveH---- sealing surface overlaying ferrous carbide (initial letter of alloy steel He)40---- nominal pressure is 40 kg, or 4.0MPa, that is, PN10 at 250 degrees Celsius, the maximum working pressure is 40 kgThe material is cast carbon steel