DN66 Ductile Iron Rubber Gate Valve With Long Stem
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Soft seal gate valve
Size:DN40mm-600mm
Design standard: DIN 3352/BS 5163/AWWA C509/JIS B2043
Test standard: DIN3230/BS 6755/AWWA C509/JIS B2003
End flange standard: DIN 2533 PN16/BS 4504 PN16/ANSI 150LB/JIS B2212 10K
Face to face standard: DIN 3202 F4/DIN 3202 F5/BS 5163/ANSI 16.10/JIS B2002
Body: Ductile iron/GGG50/A536
Wedge: Ductile iron+EPDM/Ductile iron+NBR
Stem: Brass/SS416/2Cr13
Bonnet: Ductile iron/GGG50
Handwheel: Ductile iron/GGG50
The products are widely used in water source projects, urban water supply and drainage, sewage treatment, eletric power, petroleum, petrochemical, heat supply, shipbuilding, medicine and metallurgy industries. Equipment are used for regulating or cutting off media in pipelines. Suitable media include water sewage, sea water, air, foodstuff and oil. Suitable for gear operators, electric and pneumatic control actuators.
- Q:What is the difference between Z41X gate valve and Z45X gate valve?
- There is no difference in function. The two models are mainly made of different sealing materials,
- Q:Z41T one 10 gate valve and Z44T one, 10 gate valve difference
- Z41T one, 10 is single gate, Z44T one, 10 is double gateAccording to the provisions of the JB/T 308-2004 valve type programming method:Z== gate valve4== connection: flange type1== structure: Rigid single gate4== structure: Rigid double gateT== sealing surface material: copper alloy10== pressure rating: 1.0MPa
- Q:How to distinguish between gate valve and cut-off valve?
- Standard light valve professionals to answer for you, gate valve refers to the closure of parts (gate) along the central line of the vertical direction of moving valve. The gate valve is mainly used for cutting in the pipeline. The valve is a valve with a very wide, cutting device general caliber DN = 50mm use it, sometimes a small diameter cutting device also use valve, gate valve has the following advantages:Fluid resistance is small.Minor force needed for opening and closing.Medium flow is unrestricted.When opening fully, the sealing surface is eroded by the working medium smaller than the cut-off valve.
- Q:What gate DH10016, AM
- The first Z represents the gate valve (the initial consonant of the Chinese phonetic alphabet for the gate); the second 2 represents the drive mode of the valve, that is, electro hydraulic drive.
- Q:What are the features and uses of the gate valve?
- 1) advantages: sealing performance than the cut-off valve, the fluid resistance is small, open and close more effort, full sealing surface by the erosion of media, media flows from the restrictions, with double flow, small structure length, wide application range. 2) disadvantages: high size, open need a certain space, opening and closing time is long, in the opening and closing, the sealing surface is easy to erode and scratch, and the two sealing pairs bring difficulties to the processing and maintenance.3) use: gate valve is generally used in the caliber of DN15-1800mm pipes and equipment, and its dosage is great, mainly cutting off function, not allowed to throttle.
- Q:What is the soft seal gate valve?
- Commonly used soft sealing gate valve model is divided into: Z45X and Z41X, the difference is that the Z41X is the Ming bar, and Z45X is dark rod.Matters needing attention in packing and transportation of soft sealing gate valve:Soft sealing gate valve before transport, should use the rope to tie up the small caliber.Before transportation, the lighter sides of the valve should be sealed.For larger caliber soft sealing gate valve, it should be used to carry out simple packing, it can better prevent the valve in the process of transportation damage.
- Q:Why the valve can only be fully open and fully closed valve can adjust the flow?
- Gate valve, stop valve are switching type valve, adjust the flow can not talk about, can only do so called throttle.You say "stop valve" or "translation" problem, in English, globe valve and valve word is often the same.
- Q:What does gate valve Z41H-40 mean?
- Z - that means gate valve (the initial letter of Zha)4---- is the connection form, which means flange connection1---- form of structure, which means Plain Bar wedge type rigid single gate valveH---- sealing surface overlaying ferrous carbide (initial letter of alloy steel He)40---- nominal pressure is 40 kg, or 4.0MPa, that is, PN10 at 250 degrees Celsius, the maximum working pressure is 40 kgThe material is cast carbon steel
- Q:What does "Z45W-10T" mean?What does each letter stand for?
- W is the seal material or lining material code, the valve sealing material is the valve body material, the valve sealing surface material code with "W" said, here stands for brass;The 10 is the pressure code, which stands for PN10, which is often called 1.0MPa;
- Q:What is the difference between the cut-off valve and gate valve, the general will use the cut-off valve instead of gate valve
- Yes. Globe valves and gate valves are indeed common in certain piping and operating conditions.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
DN66 Ductile Iron Rubber Gate Valve With Long Stem
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords