Product Description of Coal Shovel For Hand Tool
A coal shovel is a shovel designed for shoveling coal, coke or similar fuels, and on occasions does a double duty removing ash from the fireplace, firebox or furnace.
Specifications of Coal Shovel For Hand Tool
Overall length: 137cm
Head size: 140x360x640mm
Surface treatment: black powder coated and heat treated shovel
Or under client’s require.
Applications of Coal Shovel For Hand Tool
A large coal shovel is used by the fireman of a coal-fired steam locomotive unless an automatic stoker is used.
Smaller coal shovels of similar shape are used to stoke domestic fireplaces.
Packaging of Coal Shovel For Hand Tool
Export carton or plastic bag
- Q:Makeup expert, about the use of foundation tools
- James finished liquid foundation after the next step is to set makeup, makeup powder (powder), cannot use the hand painted, you have to use puff tools, can also use the makeup brush large, gently brush on the face, so the effect will be a little lighter.
- Q:What hand tools can be used to make toughened glass cut easily?
- Tempered glass is a prestressed glass, can not be 2 destructive processing (such as cutting, opening, etc.). Toughened glass once the compressive stress layer damage, the particle fragmentation, all say toughened glass can change the knife, plus hole are all of the mechanical properties of tempered glass very not understand nonsense.
- Q:Screwdriver and wrench is the same tool?
- WrenchWrenchA manually operated tool for screwing bolts, screws, nuts, and other threads to secure the opening or sleeve of a bolt or nut. The wrench is usually provided with a clamping handle at one end or both ends of the handle part, and when an external force is applied to the handle, the bolt or nut can be screwed, and the opening or the hole of the bolt or nut can be screwed. When the utility model is used, an external force is applied to the handle in the direction of rotation of the screw thread, and the bolt or nut can be screwed.Wrenches are usually made of carbon structural steel or alloy structural steel.Several types of wrenches commonly used.Wrench: a fixed size opening at one or both ends is used to twist a nut or bolt of a certain size.Ring spanner: both ends have a working end with six corners or twelve corners. It is suitable for occasions where the working space is narrow and the ordinary spanner can not be used.Dual purpose wrench: one end is the same as a single head wrench, and the other end is the same as the plum wrench. The bolts or nuts with the same specifications are screwed at the two ends.Adjustable wrench: the opening width can be adjusted in a certain size range, and screws or nuts with different specifications can be screwed.Hook wrench: also known as the crescent wrench for screwing thickness restricted flat nut etc..Socket wrench: it is composed of a plurality of sockets with six corners or twelve corners and is provided with a handle, a connecting rod, etc., and is especially suitable for screwing bolts or nuts with very small or very concave positions.Inner six angle wrench: a L shaped six angle wrench, used exclusively for screwing six angle screws.Torque wrench: it shows the applied torque when screwing a bolt or nut; or when the applied torque reaches a specified value, it emits a light or audible signal. Torque wrenches are suitable for assembly work that specifies the torque magnitude.
- Q:What can replace a finger to touch a screen?
- In the induction of the capacitive screen, as long as there is a weak current can be induced by the screen, so with conductive and micro current things can control the capacitive screen.
- Q:Can you tell me what hand tools are punched on the instrument box? No electric drills
- Not the kind of drill with drill bit, it is operated by hand. There are two moulds up and down. But 6mm did not die, you still use a drill, less than 1mm thick good open, you can use the speed motor, is to use the awl can pierce the first tie a proper hole, and then slowly rest, neither shaking and do not spend money.
- Q:What tools do you use for small jade carvings?
- Here is the carving of jade to introduce some of the tools needed for engraving:Jade carving: + emery grinding drill and grinderJade cutting: cutting blade + grindersJade polishing: wool wheel, polishing pasteScale removal of jade: Diamond brush
- Q:How to make manual transportation
- Material: three cans, two pairs of eco-friendly chopsticks, red rope, self portraits of the sailing painted sails, double-sided adhesive tape, rubber strip.
- Q:What tools are used for hand engraving?
- Engraved chapter, to seal the lid seal material is indonesia. With the different seal for document printing inks. Mainly in the leaves Indonesia fiber, cinnabar and castor oil as the basic raw material, made of fine processing. Good seal the inkpad stamp, vivid color pigmentation, with stereo feeling, not oil leakage, eye-catching writing is clear. Indonesia except red, there are a variety of special inks. Such as green, black, brown, blue and so on.
- Q:How do you cook tools manually?
- Do you eat to a cooker, it is necessary, the cooker as do what meal need tools, rice and rice is not the same.
- Q:What tools do you use for hand engraving stainless steel?
- For their own products on markings, eliminate the return of the trouble, reduce unnecessary losses, the lifting of the menace from the rear. Can be engraved letters in ZIPPO lighters, widely used silversmith craft workshop. The principle of alternating frequency periodic characteristic is used to generate forced vibration to make the printing pin vibrate at high frequency so as to engrave a certain depth on the workpieceMark.
We are a well-known enterprise specializing in the production and sales of high-grade farm tool, such as shovel, Chisel, Hoe,Forks,etc.Since the establishment of our company, we have been devoted to setting up a good CIS and completely implementing ISO9001 quality management system.
1. Manufacturer Overview
|Annual Output Value
||US$ 10 Million - US$ 50 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||71% - 80%
|No.of Employees in Trade Department
||About 1,000 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range
||High; Average; Low